Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 763.

Kitano, T and Naik, Ajay and Hashmi, S.A.R and Vashishtha, S.A.R. and Chand, N (2013) Steady state rheology of PP/PET blends. Indian journal of chemical technology . ISSN 0971-457X

B K , Prasad and M, Sharma and G K , Gupta and Dr., O. P. Modi (2013) P/M Processed Titanium Foam: Influence of Morphology and Content of the Space Holder on Microstructure and Mechanical Properties. Powder Metallurgy. ISSN 0032-5899

DasGupta, R and A K , Jha and S , Das (2013) Effect of addition of fine SiC particles on the dry sliding wear behaviour of extruded 2014 Al-alloy. ISRN Tribology. pp. 1-9. ISSN 2090-889X

B K , Prasad (2013) Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy. International Journal of Materials Research. ISSN 1862-5282

B K , Prasad and A K, Gupta (2013) Effects of Microstructural Features and Test Parameters on the Abrasive Wear Response of an Al-Si Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and S, Rathod and M, Sharma and Dr., O. P. Modi and A K, Khare (2013) Effect of Aluminium Addition on Densification Behaviour and Microstructural Features of P/M Processed Cu-TiC Composites. International Journal of Materials Research. ISSN 1862-5282

Dr., U K Dwivedi and Dr., S A R Hashmi and Navin, Chand (2012) Tribological behaviour of PTFE modified cotton polyester composites. Tribiology. pp. 1-6.

B K , Prasad (2012) Effects of Some Solid Lubricant Particles and Their Concentration in Oil towards Controlling the Wear Performance of a Leaded-Tin Bronze Bush. Canadian Metallurgical Quarterly, 51. ISSN 0008-4433

B K , Prasad (2012) Sliding Wear Response of a Bronze Bushing: Influence of Applied Load and Test Environment. Journal of Materials Engineering and Performance. ISSN 1059-9495

A, Anshul and S S, Amritphale and Dr., Navin Chandra and A.K., Gupta and R., Yadav (2012) Wide-Range Colossal Magnetoresistance in La0.7A0.3MnO3 (A5Sr, Ag) Thin Films. International Journal of Applied Ceramic technology , 9. pp. 214-220. ISSN 1546-542X

DasGupta, R and S , Das and A K , Jha (2012) Sliding Wear Behaviour of Al-7075 based Metal Matrix Composite: Effect of Processing Parameters. Key Engineering Materials,. pp. 555-560. ISSN 1013-9826

DasGupta, R and A K , Jha and Sudhanshu , Chaturvedi (2012) Combined effects of composite making, ageing and extrusion on property improvements in Al-7075-based alloy. Int. J. Microstructure and Materials Properties, 7. pp. 475-490. ISSN 1741-8410

G. S., Upadhya and Ravi , Kant and Meenakshi , Sharma and Deepesh Kumar , Singh and S S, Amritphale and Navin, Chand (2012) Photo degradation of synthetic dyes using cadmium sulfide nanoparticles synthesized in the presence of different capping agents. Separation and Purification Technology,, 88. pp. 39-45. ISSN 1383-5866

B K , Prasad and S.P., Narayan and Dr., O. P. Modi and N. , Ramakrishnan and A M, Kumar and A K, Sachdeva (2012) Effect of Cerium and Aluminium on the Hot-Deformation Behaviour of Magnesium. Zeitschrift Fur Metallkunde, 103. pp. 590-602. ISSN 1862-5282

Dr., U K Dwivedi and Dr., S A R Hashmi and Navin, Chand and Dr., Naik and Dr., R Joshi (2012) Development and Physico-Mechanical Behavior of LDPE–Sisal Prepreg-Based Composites. POLYMER COMPOSITES.. pp. 650-655. ISSN 0272-8397

B K , Prasad and A K, Gupta and S , Das and R K, Panjoo (2012) Mechanical and Abrasive and Erosive-Corrosive Wear Properties of Eutectic Al-Si Alloy: Effects of T6 Heat Treatment Parameter. Transactions of Nonferrous Society of China. ISSN 1003-6326

Dr., S A R Hashmi and Dr., A Naik and Navin, Chand and Dr., Janu Sharma and Dr, Prabhat Sharma (2011) Development of Environment Friendly Hybrid Layered Sisal–Glass–Epoxy Composites. Composite Interfaces, 18. pp. 671-683. ISSN 0927-6440

Dr., Navin Chandra and S S, Amritphale and Deepti, Pal (2011) Manganese recovery from secondary resources: a green for carbothermal reduction and leaching of manganese bearing hazardous waste. Journal of Hazardous Materials, 186. pp. 293-299. ISSN 0304-3894

Dr., Navin Chandra and Ravi , Kant and Dr, Upadhyay and S S, Amritphale and Meenakshi , Sharma (2011) Synthesis of nano-structured 3C-SiC by carbothermal reduction of silicon bearing gel and carbon soot. Materials Letters, 65. pp. 2161-2164. ISSN 0167-577X

Murari, Prasad and Rajkumar, Paul and Nand K., Sah (2011) Anticancer biology of Azadirachta indica L (neem) A mini review. Cancer Biology & Therapy, 12. pp. 467-476. ISSN 1538-4047

B K , Prasad (2011) Sliding Wear Response of a Gray Cast Iron: Effects of Some Experimental Parameters. Tribology International. pp. 660-667. ISSN 0301-679X

B K , Prasad and S, Rathod and M S, Yadav and Dr., O. P. Modi (2011) Sliding Wear Behaviour of Cast Iron: Influence of MoS2 and Graphite Addition to the Oil Lubricant. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (2011) Sliding Wear Behaviour of Zinc-Based Alloy vis-à-vis Gray Cast Iron as Influenced by Applied Load and Sliding Speed. Industrial Lubrication and Tribology. pp. 158-170. ISSN 0036-8792

B K , Prasad and S , Das and Aruna, Patel (2011) Compressive Deformation Behaviour of Al Alloy (2014)-10wt.% SiCp Composite: Effects of Strain Rate and Temperature. Materials Science and Engineering A. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., S P Narayan and Dr., N Ramakrishnan and Dr., A M Kumar and Dr., A K Sachdev (2011) Microstructure and Micromechanism Maps to Optimize Useful Deformation Processing Conditions in Magnesium Alloy. Materials Science and Technology, 27. pp. 1639-1647. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and Dr., M. Sharma and Dr., G K Gupta and Dr., Anil K Gupta (2011) Titanium foam through powder metallurgy route using acicular urea particles as space holder. Materials Letters, 65. pp. 3199-3201. ISSN 0167-577X

M. , AHMED and S. K., PANTHI and N., Ramakrishnan and A K , Jha and Dr., A H Yegneshwaran and DasGupta, R and S., AHMED (2011) Alternative flat coil design for electromagnetic forming using FEM. Transactions of Nonferrous Society of China,, 21. pp. 618-625. ISSN 1003-6326

DasGupta, R and S , Das and A K , Jha (2011) Application Potential for new Al- based materials: Industrial Input. Metallurgical and Materials Transactions A. . ISSN 1073-5623

Mohini , Saxena and Asokan, Pappu and S., Murali and Bisham , Yadav and S., Sangeeta (2011) Pilot-scale demonstration study of the impact of fly ash on soil fertility and crop yield. Land contamination & reclamation,, 18.

D K , Singh and S K , Sanghi and S, Gowri and Dr., Navin Chandra and S B , Sanghi (2011) Determination of aliphatic amines by gas chromatography-mass spectrometry after in-syringe derivatization with pentafluorobenzoyl chloride. Journal of chromatography. A, , 1218. pp. 214-220. ISSN 0021-9665.

Chand, Navin and Rai, NEELESH and AGRAWAL, S L and Patel, S. K. (2011) Morphology, thermal, electrical and electrochemical stability of nano aluminium-oxide-filled polyvinyl alcohol composite gel electrolyte. Bulletin of Materials Science, 34. ISSN 0250-4707

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) Influence of talc concentration in oil lubricant on the wear response of a bronze journal bearing. Wear, 269. pp. 498-505.

Maheshwari, A.K. and Pathak, K.K and N. , Ramakrishnan and Narayan, S.P (2010) Modified Johnson-Cook Material Flow Model for Hot Deformation Processing. Journal of Materials Science. ISSN 0022-2461

B K , Prasad (2010) Effects of Alumina Dispersion on the Erosive-Corrosive Wear Response of a Zinc-Based Alloy under Changing Slurry Conditions and Distance. Wear, 238. ISSN 0043-1648

Dr., Navin Chandra and Ravi , Kant and Nitish, Gupta and Dr., Upadhyay (2010) Removal of Zn (II) from aqueous solution by using hybrid precursor of silicon and carbon. Bioresource Technology, 101. pp. 3355-3362. ISSN 0960-8524

Murari, Prasad (2010) UPTAKE CAPACITY OF ZN2+ BY NATURAL VIETNAMESE BASALT AND THEIR APPLICATION FOR WASTEWATER TREATMENT. N. T. Minh et al., 23. pp. 423-440.

Murari, Prasad and Siddharth , Parimal and Ujjwal , Bhaskar (2010) Prediction of Equillibrium Sorption Isotherm: Comparison of Linear and Nonlinear Methods. Ind. Eng. Chem. Res., 49. pp. 2882-2888. ISSN 0888-5885

Murari, Prasad (2010) Role of schorl’s electrostatic field in discoloration of methyl orange wastewater using schorl as catalyst in the presence of H2O2. Technological Sciences, 53. pp. 3014-3019. ISSN 3014-3019

Murari, Prasad and Vishwajeet , S. YADAV and Jeeshan, Khan and S S, Amritphale and C. B., Raju and M., Singh (2010) `Sequestration of Green House Gases (CO2) by Industrial Hazardous Waste’. Journal of Hazardous Materials, 176. pp. 1044-1050. ISSN 0304-3894

Murari, Prasad and Siddharth , Parimal and Ujjwal , Bhaskar (2010) `Prediction of Equillibrium Sorption Isotherm : Comparison of Linear and Non-linear Methods.’. Ind. Eng. Chem. Res., , 49. pp. 2882-2888.

Murari, Prasad and XU Huan, Yan and WANG, Peng, (2010) 'Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like system by Acid-modified schorl’. Bulletin of The Korean Chemical Society, 31. pp. 803-807.

Murari, Prasad (2010) 'Role of schorl's electrostatic field in discoloration of methyl orange wastewater using schorl as catalyst in the presence of H2O2’. Science China Technological Sciences, 53. pp. 3014-3019. ISSN 1674-7321

Murari, Prasad (2010) `The Uptake Capacity of Zn(II) by Natural Vietnamese Basalt and their Application for Wastewater Treatment’. Hydrological Science , 23. pp. 323-340.

B K , Prasad and Dr., O. P. Modi and M S, Yadav and S, Rathod (2010) Effects of Some Solid Lubricants Suspended in Oil towards Controlling the Wear Performance of a Cast Iron. Journal of Tribology. ISSN 0742-4787

DasGupta, R (2010) The Stretch, Limit and Path Forward for Particle Rein-forced Metal Matrix Composites of 7075 Al-Alloys. Engineering, 2. pp. 237-256. ISSN 1947-3931

S., Dikshit and V., Gurjar and DasGupta, R and S., Chaturvedi and A K , Jha and K.K., Pathak (2010) Studies on cold upsetting behaviour of AA2014-based metal matrix composites, FEM simulation, and comparison with experimental results. Journal of Material Science , 45. pp. 4174-4179. ISSN 0022-2461

K.K., Pathak and S., Lomesh and A K , Jha (2010) Die Profile Design for Tube Extrusion and its Experimental Verification. J. of the Braz. Soc. of Mech. Sci. & Eng,, 32. pp. 160-164.

DasGupta, R and S , Das and S., Chaturvedi and A K , Jha (2010) Effect of extrusion on properties of Al-based composite. Transactions of Nonferrous Society of China, 20. pp. 2229-2230. ISSN 1003-6326

Mohamed, Osmani and Asokan, Pappu (2010) An Assessment of the Compressive Strength of Glass Reinforced Plastic Waste Filled Concrete for Potential Applications in Construction. Concrete Research Letters, 1. pp. 1-5. ISSN 2180-1371

Sunil , Kumar and Fa´tima, Esteves and Antonio Pedro , Souto and Noe´mia , Carneiro (2010) Functional finishing of polyamide fabrics using ZnO–PMMA nanocomposites. Journal Material Science, 45. pp. 2427-2435. ISSN 0022-2461

Vishal Kumar , Baderia and V. , Sorna Gowria and Sunil , Kumar (2010) Stable Physically Adsorbed Coating of Poly�Vinyl Alcohol for the Separation of Basic Proteins1. Journal of Analytical Chemistry,, 67. pp. 278-283. ISSN 1061-9348

Ankita , Shukla and Sunil Kumar , Sanghi and V. , Sorna , Gowri and Vishal , , Kumar Baderia and Deepesh Kumar , Singh (2010) Determination of Biogenic Amines in Lake Water by Micellar Electrokinetic Chromatography with Fluorescence Detection after Derivatization with Fluorescamine1. Journal of Analytical Chemistry, 66. pp. 296-300. ISSN 1061-9348

N. , Ramakrishnan and K.K., Pathak and S.P., Narayan and Amit kumar, Maheswari (2010) Modified Johnson–Cook material flow model for hot deformation processing. Journal of Materials Science,, 45. pp. 859-864. ISSN 0022-2461

Ajay , Kumar and K.K., Pathak and M. S., Hora (2010) Application of Neural Networks in Preform Design of Upsetting Process Considering Unequal Interfacial Frictional Conditions. Scholars Research Library. pp. 310-317. ISSN 0975-508X

D. K. , Sehgal and K. , Pathak (2010) Gradientless shape optimization using artificial neural networks. Struct Multidisc Optim,, 41. pp. 699-709.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the microarchitecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology,, 41. pp. 276-282.

Ahirwar, R. S. (2010) progress report 2010-11. annual report.

Rajesh Kumar , Bhushan and Sudhir , Kumar and S , Das (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. The International Journal of Advanced Manufacturing Technology, 50. pp. 459-569. ISSN 0268-3768

Navin, Chand and Prabhat , Sharma and M. , Fahim (2010) Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene. Materials Science and Engineering: A, 527. pp. 5873-5878.

Navin, Chand and Prabhat , Sharma and M., Fahim (2010) Tribology of maleic anhydride modified rice-husk filled polyvinylchloride. Wear, 269. pp. 847-853. ISSN 0043-1648

S.K., Bajpal and Navin, Chand and Grace, Mary (2010) Preparation of poly(acrylonitrile)-grafted silk fibers with antibacterial properties. Fibers and Polymers, 11. pp. 338-345. ISSN 1229-9197

Navin, Chand and S.K., Bajpai and R., Joshi and Grace, Mary (2010) THERMOMECHANICAL BEHAVIOR OF SISAL FIBERS GRAFTED WITH POLY(ACRYLAMIDE-CO-N-VINYL-2-PYRROLIDONE) AND LOADED WITH SILVER IONS OR SILVER NANOPARTICLES. BioResources, 5. pp. 372-388.

Navin, Chand and R., Joshi (2010) Analysis of Mechanical, Thermal, and Dynamic Mechanical Behaviors of Different Polymer-Coated Sisal Fibers. Journal of Natural Fibers. , 7. pp. 100-110. ISSN 1544-0478

V, Chaurasia and Navin, Chand and S.K., Bajpai (2010) Water Sorption Properties and Antimicrobial Action of Zinc Oxide Nanoparticles-Loaded Cellulose Acetate Films. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 47. pp. 309-317.

S., Dikshit and V., Gurjar and DasGupta, R and S., Chaturvedi and K.K., Pathak and A K , Jha (2010) Studies on cold upsetting behaviour of AA2014-based metal matrix composites, FEM simulation, and comparison with experimental results. Journal of Material Science , 45. pp. 4174-4179. ISSN 0022-2461

V.S., Gowri and L., Almeida and MTP , de Amorim and NC, Pacheco and AP, Souto and MF, Esteves and SK, Sanghi (2010) Functional finishing of polyamide fabrics using ZnO–PMMA nanocomposites. Journal of Material Science , 45. pp. 2427-2435. ISSN 0022-2461

A.K., Majumdar and J P, Barnwal (2010) Processing of coal fines in a water-only cyclone. Fuel, 90. pp. 834-837.

P., Joshi and H. C. , Joshi, and S. K. , Sanghi and S., Kundu (2010) Immobilization of monoamine oxidase on eggshell membrane and its application in designing an amperometric biosensor for dopamine. Microchimica Acta, 169. pp. 383-388. ISSN 0026-3672

G., Mary and S.K., Bajpai and Navin, Chand (2010) Antibacterial Activity of Zn-Loaded Grafted Fibers—Mechanical Strength and Biocidal Action. Journal of Natural Fibers. , 7. pp. 34-41. ISSN 1544-0478

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the micro-architecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology, 41. pp. 276-282.

B K , Prasad (2010) Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil. Journal of Materials Engineering and Performance, 19. pp. 413-420. ISSN 1059-9495

K.K., Pathak and Ajay Kumar , Kaviti and M.S., Hora (2010) The application of neural networks in the preform design of the upsetting process. Journal of Materials Science Letters, 62. pp. 55-59. ISSN 1047-4838

K.K., Pathak and V.S, Pagey and N. , Ramakrishnan (2010) Optimisation of extrusion die profile to satisfy metallurgical and manufacturing criteria. Materials Science and Technology, 26. pp. 732-737. ISSN 0267-0836

A., Nigrawal and Navin, Chand (2010) Development and electrical characterization of carbon soot filled polyester graded composites. Materials & Design, 31. pp. 3672-3676.

S., Parimal and Murari, Prasad and U., Bhaskar (2010) Prediction of Equilibrium Sorption Isotherm: Comparison of Linear and Nonlinear Methods. Industrial & Engineering Chemical Reasearch, 49. pp. 2882-2888.

A., Patnaik and A., Satapathy and Navin, Chand and N.M., Borkula and S., Biswas (2010) Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review. Wear, 268. pp. 249-263. ISSN 0043-1648

R.N., Rao and S , Das (2010) Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite. Materials & Design, 31. pp. 3227-3233.

R.N., Rao and S , Das (2010) Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites. Materials & Design, 31. pp. 1200-1207.

D., Singh and D.P., Mondal and Dr., O. P. Modi and V.K., Sethi (2010) Low stress abrasive wear response of boron steel under three body abrasion: Effect of heat treatment and peening intensities. Indian Journal of Engineering and Material Science, 17. pp. 208-218. ISSN 0971-4588

R.N., Rao and S , Das (2010) Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials & Design, 32. pp. 1066-1071.

S. , Saxena and N. , Ramakrishnan and J.S., Chouhan (2010) Establishing methodology to predict fracture behaviour of piping components by numerically predicting specimen fracture data using tensile specimen test. Engineering Fracture Mechanics, 77. pp. 1058-1072. ISSN 0013-7944.

S.K., Shukla and V., Kumar and M, Mudgal and R K, Morchhale and M C, Bansal (2010) Utilization of concentrate of membrane filtration of bleach plant effluent in brick production. J Hazard Mater, 184. pp. 585-590. ISSN 0304-3894

S K, Singhal and A.K., Srivastava and Dilawar, Nita and Anil K, Gupta (2010) Growth and characterization of boron nitride nanotubes having novel morphologies using mechanothermal process. Journal of Nanoparticle Research, 12. pp. 2201-2210. ISSN 1388-0764

S.K., Singhal and A.K., Srivastava and Anil K, Gupta and Z. G. , Chen (2010) Synthesis of boron nitride nanotubes by an oxide-assisted chemical method. Journal of Nanoparticle Research, 12. pp. 2405-2413. ISSN 1388-0764

Murari, Prasad and XU Huan, Yan and P, Wang (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like System by Acid-modified Schorl. Bulletin of The Korean Chemical Society , 31. pp. 803-807.

S , Das and Rao, R.N. and D.P., Mondal and Dixit, G (2010) Effect of Heat Treatment on the Sliding Wear Behaviour of Aluminium Alloy (Al–Zn–Mg) Hard Particle Composite. Tribiology International. ISSN 43(2010)330-339

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) The Influence of Lead Suspension in Oil Lubricant on the Sliding Wear Behaviour of Cast Iron. tribology letters. ISSN 1023-8883

DasGupta, R (2010) Sliding Wear Resistance of Al-Alloy Particulate Composites: An Assessment on Its Efficacy. Tribology International. ISSN 0301-679X

Dikshit, S and Gurjar, V and DasGupta, R and Chaturvedi, S and Pathak, K.K and Jha, A.K (2010) Studies on Cold Upsetting Behaviour of AA2014-Based Metal Matrix Composites, FEM Simulation, and Comparison with Experimental Results. Journal of Materials Science. ISSN 0022-2461

Yadav , V.S and Murari, Prasad and Khan, J and S S, Amritphale and Singh, M and Raju, C.B (2010) Sequestration of Carbon Dioxide (CO2) Using Redmud. Journal of Hazardous Materials. ISSN 0304-3894

Chandra, N and Singh, D.K and Sharma, M and Upadhyay, R.K and S S, Amritphale and Sanghi, S.K. (2010) Synthesis and Characterization of Nano-Sized Zirconia Powder Synthesized by Single Emulsion-Assisted Direct Precipitation. Journal of Colloid and Interface Science. ISSN 0021-9797

Gowri, V.S and Almedia, L and Sanghi, S.K. and Amorim, M.T.P and Esteves, M.F and Pacheco, N.C and Souto, A.P (2010) Functional Finishing of Polyamide Fabrics Using ZNO-PMMA Nanocomposites. Journal of Materials Science. ISSN 0022-2461

Joshi, P and Sanghi, S.K. and Kundu, S (2010) Immobilization of Monoamine Oxidase on Eggshell Membrane and Its Application in Designing an Amperometric Biosensor for Dopamine. Microchimica Acta. ISSN 0026-3672

Gowri, V.S and Pacheco, N.C and Esteves, M.F and Souto, A.P and Almedia, L (2010) Polymer Nanocomposites for Multifunctional Finishing of Textiles – A Review. Textile Research Journal. ISSN 18(2010)1290-1306

XU Huan, Yan and Murari, Prasad and Peng, W (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl- Catalyzed Fenton-Like System by Acid-Modified Schorl. Bulletin of Korean Chemical Society. ISSN 31(2010)803-807

Asokan, Pappu and Price, A.D.F and Mohamed, Osmani (2010) Improvement of the Mechanical Properties of Glass Fibre Reinforced Plastic Waste Powder Filled Concrete. Construction and Building Materials,. ISSN 0950-0618

Ansarifar, A and Asokan, Pappu and Yoong, K and Wang, L and Mohamed, Osmani (2010) Characterization and Use of Glass Fibre Reinforced Plastic Waste Powder as Filler in Styrene-Butadiene Rubber. Journal of Rubber Research . ISSN 1511-1768

Chand, N and Mary, G and Bajpai, S.K and Joshi, R (2010) Thermomechanical Behaviour of Sisal Fibres Grafted with Poly(Acrylamide-Co-N-Vinyl-2-Pyrrolidone) and Loaded with Silver Ions or Silver Nano Particles. Bio Resources. ISSN 1930-2126

Bajpai, S.K and Chand, N and Chourasiya, V (2010) Investigation of Water Vapour Permeability and Antimicrobial Property of Zinc Oxide Nanoparticle Loaded Chitosan Based Edible Film. Journal of Applied Polymer Science. ISSN 0021-8995

Chand, N and Joshi, R and Mary, G and Bajpai, S.K (2010) Thermomechanical Behaviour of Sisal Fibres Grafted with Poly(Acrylamide-Co-N-Vinyl-2-Pyrrolidone) and Loaded with Silver Ions or Silver Nano Particles. Bio Resources. ISSN 1930-2126

Pathak, K.K and Lomash, S and Jha, A.K. and N. , Ramakrishnan (2010) Process and Die Profile Design for Tube Extrusion of g Iron. Structural and Multidisciplinary Optimization. ISSN 1615-147X

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2009) Concentration Profile of Glass Fiber Bundles in Epoxy- Based Gradient Composites During Centrifugation. Journal of Applied Polymer Science, 113. pp. 3840-3846. ISSN 0021-8995

Murari, Prasad (2009) Schorl: A novel catalyst in mineral-catalyzed Fenton-like system for dyeing wastewater discoloration. Journal of Hazardous Materials, 165. pp. 1186-1192. ISSN 0304-3894

Murari, Prasad and Nidhi , Singhal and Vineet, Kumar and Neelmani, Gupta (2009) Modeling the Adsorption Kinetics of Divalent Metal Ions onto Pyrophyllite Using the Integral Method. Ind. Eng. Chem. Res, 48. pp. 2125-2128. ISSN 0888-5885

Murari, Prasad (2009) `Schorl : A novel catalyst in mineral –catalyzed Fenton-like system for dyeing wastewater discoloration’. Journal of Hazardous Materials, 165. pp. 1186-1192. ISSN 0304-3894

Murari, Prasad and XU Huan, Yan and SHAN , LianWe and QI Shu, Yan (2009) `Discoloration of Rhodamine B dyeing wastewater by schorl- catalyzed Fenton-like reaction’. Science in China Series E: Technological Sciences, 52. pp. 3054-3060.

B K , Prasad and Dr., O. P. Modi (2009) Slurry Wear Characteristics of Zinc-Based Alloys: Effects of Sand Content of Slurry, Silicon Addition to Alloy System and Traversal Distance. Transactions of Nonferrous Society of China. ISSN 1003-6326

B K , Prasad (2009) Sliding Wear Behaviour of a Cast Iron as Affected by Test Environment and Applied Load. Industrial Lubrication and Tribology. ISSN 0036-8792

Dr., S S Amrithphale and Dr. , Avneesh Anshul and Dr., Navin Chandra and Dr., N Ramakrishnan (2009) Development of celsian ceramics from fly ash useful for X-rayradiation-shielding application. Journal of the European Ceramic Society, 27. pp. 4639-4647.

Dr., O. P. Modi and Dr., G Ruhi and Dr., I B Singh and Dr., A K Jha (2009) characterization of corrosion resistance properties of sel-gel aluminium coating in mine water environment. journal of chemical technology, 16. pp. 216-220.

Dr., O. P. Modi and B K , Prasad and Dr., A. Chrysanthou and Dr., A K Shah and Dr., V. P. Deshmukh (2009) Erosive–corrosive wear behaviour of Fe–TiC and cobalt based layers separately deposited on En31 steel. Materials Science and Technology, 23. ISSN 0267-0836

Dr., O. P. Modi and Dr., G Ruhi and Dr., I B Singh (2009) Effect of Sintering Atmosphere on the Corrosion and Wear Resistance of Sol-Gel Alumina-Coated Mild Steel Surface. Corrosion. pp. 758-764. ISSN 0010-9312

S S, Amritphale and Nitish, Gupta and Dr., Navin Chandra (2009) Removal of lead from aqueous solution by hybrid precursor prepared by rice hull. Journal of the Hazardous Materials, 163. pp. 1194-1198. ISSN 2164-6325

Asokan, Pappu and Mohamed, Osmani (2009) Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites. Journal of Cleaner Production,, 19. pp. 821-829. ISSN 0959-6526

Dr., Navin Chandra and Meenakshi , Sharma and Deepesh Kumar , Singh and S S, Amritphale (2009) Synthesis of nano-TiC powder using titanium gel precursor and carbon particles. Materials Letters, 63 (12). pp. 1051-1053. ISSN 0167-577X

Dr., K K Pathak and Dr., Rajeev Arya and Dr., Neeraj Jain and Dr., Alok Chaubey (2009) Preform Map for Mild Steel Upsetting and Its Experimental Verification. J. Braz. Soc. Mech. Sci. & Eng., 31.

Dr., S S Amritphale and Dr., Avneesh Anshul and Dr., Navin Chandra and Dr., N. Ramakrishnan (2009) A novel process for making radiopaque materials using bauxite—Red mud. Journal of the European Ceramic Society, 27. pp. 1945-1921.

Deepti , Mishra and M Akram, Khan and B , Chandrakar and Prabha, padamkaran (2009) performance evaluation of an effluent treatment plant for a plup & paper mill. Indian journal of chemical technology, 16. pp. 79-83.

D.P., Mondal and Dr., M D Goel and S , Das (2009) Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam. Materials and Design, , 30. pp. 1268-1274.

D.P., Mondal and S , Das and Dr., Nidhi Jha (2009) Dry sliding wear behaviour of aluminum syntactic foam. Materials and Design., 30.

Dr., Manali Shuklar and Dr., K K Pathak and Dr., K K Dwivedi and Dr., E Ramadarshan (2009) Influence of key test parameter on SPT result. indian journal of engineering and material sciences, 16. pp. 385-389.

Murari , Prasad (2009) Discoloration of Rhodamine B dyeing wastewater by schorl-catalyzed Fenton-like reaction. Science in China Series E: Technological Sciences., 52. pp. 3054-3060. ISSN 1006-9321

Sanjeev, Saxena and J S, Chauhan and N., Ramakrishnan (2009) Fatigue life prediction analysis of surface cracked straight pipes. Transactions of The Indian Institute of Metals, 62. pp. 191-195.

D., Mishra and M.A., Khan and M, Mudgal and P , Padmakara and B., Chakradhar (2009) Performance evaluation of an effluent treatment plant for a pulp & paper mill. Indian journal of chemical technology , 16. pp. 79-83. ISSN 0971-457X

K.K., Pathak and P., Dutt and N. , Ramakrishnan (2009) Evaluation of Local Co-Ordinates in Finite Elements Using Generic Algorithm. J Structural Engineering, 35. pp. 247-248.

K.K., Pathak and M.S., Hora and S., Akhtar (2009) Torque Maps for Sizing Optimization of Torsional Shafts. Journal of Struct. Engg.,, 35. pp. 247-248.

K.K., Pathak and S., Lomesh and A K , Jha (2009) Process and die design for square tube extrusion. Ind. J Engg. & Mat. Sc., 16. pp. 51-55. ISSN 0971-4588

S., Rathod and Dr., O. P. Modi and B K , Prasad and A., Chrysanthou and V.P., Deshmukh and A.K., shah and D., Vallauri (2009) Cast in situ Cu-TiC composites: Synthesis by SHS route and characterization. Material Science and Engineering A, 502. pp. 91-98.

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

A., Anshul and S S, Amritphale and Dr., Navin Chandra and N. , Ramakrishnan and A., Shrivastava and U.S.P., Verma (2009) Chemically formulated ceramic gamma ray irradiation shielding materials utilising red mud. Materials Science and and Engineering A, 108. pp. 429-437. ISSN 1743-6753

Ahirwar, R. S. (2009) progress report 2009-10. annual report.

Navin, Chand and A., Nigrawal (2009) Development, Dielectric, and Thermal Studies on HAF Carbon-filled Polyester Gradient Composites. Journal of Composite Materials. , 43. pp. 2859-2869. ISSN 0021-9983

Navin, Chand and Bhajan Das, Jhod and Vijai, Kumar (2009) Development, Mechanical, Thermal and Electrical Properties of Linseed Husk Powder Filled PVC Composites. Journal of Biobased Materials and Bioenergy, 3. pp. 165-171. ISSN 1556-6560

Navin, Chand and S.K., Bajpal and Grace, Mary (2009) Coper (II) and copper nanoparticles-loaded chemically modified cotton cellulose fibres with fair antibacterial properties. Journal of Applied polymer Science., 113. pp. 757-766. ISSN 0021-8995

Navin, Chand and B. Jhod, Das (2009) Mechanical, electrical and Thermal properties of Maleic Anhydride Modified Rice Husk Filled PVC Composites. Bio Resources, 4. pp. 1228-1242.

Navin, Chand and U.K ., Dwivedi (2009) Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite. Applied Composite Materials, 16. pp. 93-100. ISSN 0929-189X

U.K ., Dwivedi and Navin, Chand (2009) Influence of MAg PP on abrasive wear behavior of Chopped sisal fibre reinforced PP Composites. Journal of Materials Processing Technology, 209.

U.K ., Dwivedi and Ajoy, Ghosh and Navin, Chand (2009) Role of PVA Modification in Improving the sliding wear behavior of Bamboo. Bio Resources, 4. pp. 522-528. ISSN 1930-2126

S. A. R. , Hashmi and U.K ., Dwivedi (2009) SiC dispersed polysulphide epoxy resin based functionally graded material. POLYMER COMPOSITES, 30. pp. 162-168. ISSN 0272-8397

D.P., Mondal and M.D., Goel and S , Das (2009) Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foam. Materials Science and Engineering: A, 507. pp. 102-109.

D.P., Mondal and S , Das and N. , Ramakrishnan and K. Udaya, Bhaskar (2009) Cenosphere filled aluminum syntactic foam made through stir-casting technique. Composites Part A: Applied Science and Manufacturing, 40. pp. 279-288. ISSN 1359-835x

P. , Padmakara and B., Chakradhar (2009) Assessment of ground water quality of Bhavnagar Region. Journal of Scientific & Industrial Research , 68. pp. 964-966.

B K , Prasad (2009) Influence of Suspended Talc Particles in Oil And Nature of Material Microconstituents on Sliding Wear Characteristics of Cast Iron and Zinc-based Alloy. Canadian Metallurgical Quarterly, 48. pp. 455-464. ISSN 0008-4433

D.P., Mondal and S , Das and A., Badkul and N., Jha (2009) Modelling of Evaporative Cooling of Porous Medium Filled with Evaporative Liquied. CMC-Computers Materials & Continua , 13. pp. 115-134.

S.K., Panthi and N. , Ramakrishnan and M. , Ahmed and S.S., Singh and M.D., Goel (2009) Finite Element Analysis of sheet metal bending process to predict the springback. Materials & Design, 31. pp. 657-662.

K.K., Pathak and S., Lomesh and Neeraj , Jain and A.K., Jha (2009) Tube extrusion design for some selected inner profiles. Int. J. Physical Sc. , 4. pp. 69-75.

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Corrosion behaviour of nano structured sol-gel alumina coated 9Cr-1Mo ferritic steel in chloride bearing environments. Surf. Coat. Tech., 204. pp. 359-365.

R.N., Rao and S , Das and D.P., Mondal and G., Dixit (2009) Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites. Wear, 267. pp. 1688-1695. ISSN 0043-1648

K.K., Pathak and S., Lomesh and A K , Jha and N. , Ramakrishnan (2009) Process and die profile design for tube extrusion of γ iron. Structural and Multidisciplinary Optimization, 40. pp. 491-496. ISSN 1615-147X

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Pitting of AISI 304L stainless steel coated with nano structured sol–gel alumina coatings in chloride containing acidic environments. Corrosion Science, 51. pp. 3057-3063. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Sikand, Rajiv and Arun M, Kumar and Anil K., Sachdev and Alan A , Luo and Vipin, Jain and Anil K, Gupta (2009) AM30 porthole die extrusions—A comparison with circular seamless extruded tubes. Journal of Materials Processing Technology, 209. pp. 6010-6020.

S. , Saxena and N. , Ramakrishnan and B.K., Dutta (2009) Determination of stretch zone width using fem. Engineering Fracture Mechanics, 76. pp. 911-920. ISSN 0013-7944.

H A, Temel and Bozkurt, V. and A.K., Majumdar (2009) Selective Oil Agglomeration of Lignite. Energy & Fuels, 23. pp. 779-784. ISSN 0887-0624

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al–Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

N. , Ramakrishnan and Chouhan, J.S and Saxena, S (2009) Coupled Phenomenological and Fracture Mechanics Approach to Assess the Fracture Behaviour of TWC Piping Component. Nuclear Engineering and Design. ISSN 0029-5493

D.P., Mondal and Goel, M.D and S , Das (2009) Compressive Deformation and Energy Absorption Characteristics of Closed Cell Aluminum-Fly Ash Particle Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

Ruhi, G. and Singh, I.B. and Dr., O. P. Modi (2009) Corrosion Behaviour of Nano-Structured Sol-Gel Alumina Coated 9Cr-1Mo Ferritic Steel in Chloride Bearing Environment. Surface Coating Technology.

Ruhi, G. and Jha, A.K and Singh, I.B. and Dr., O. P. Modi (2009) Characterization of Corrosion Resistance Properties of Sol-Gel Alumina Coating in Mine Water Environment. Indian Journal of Chemical Technolology.

Ruhi, G. and Dr., O. P. Modi and Singh, I.B. (2009) Pitting Resistance of Nano-Structured Sol-Gel Alumina Coatings in Chloride Containing Acidic Environment. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Pathak, K.K and Lomash, S and Jha, A.K and Jain, N (2009) Process and Die Design for Square Tube Extrusion. International Journal of Physical Sciences.

Qi, S and Xu, H and Shan, L and Murari, Prasad (2009) Discoloration of Rhodamine B Dyeing Wastewater by Schorl-Catalyzed Fenton-Like Reaction. Science in China, Series E: Technological Sciences.

Ansarifar, A and Wang, L and Mohamed, Osmani and Asokan, Pappu (2009) Assessing the Effect of Thermoset Polyester Resin Waste Powder on the Processing and Mechanical Properties of Natural Rubber. Journal of Rubber Research . ISSN 1511-1768

Chouhan, J.S and Saxena, S and N. , Ramakrishnan (2009) Assessing Fracture Behaviour of Circumferentially TWC Elbows Subjected to Closing and Opening Moment. Nuclear Engineering and Design.

Saxena, S and N. , Ramakrishnan (2009) An Improved Method for Numerical Determination of SZW Using FEM. Nuclear Engineering and Design. ISSN 0029-5493

Dwivedi, U.K and Chand, N (2009) Influence of MA-g-PP on Abrasive Wear Behaviour of Chopped Sisal Fibre Reinforced PP Composites. Journal of Materials Processing Technology.

Dwivedi, U.K and Chand, N (2009) Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite. Applied Composite Materials.

Dwivedi, U.K and Chand, N (2009) Influence of MA-g-PP on Abrasive Wear Behaviour of Chopped Sisal Fibre Reinforced PP Composites. Journal of Materials Processing Technology.

Patel, S. K. and Patel, R.B and Awadhia, A and AGRAWAL, S L (2009) Coupled Phenomenological and Fracture Mechanics Approach to Assess the Fracture Behaviour of TWC Piping Component. Pramana: Journal of Physics.

Subhraminiuam, Anandha and Ramakrishanan, K (2009) Rational approximants to 5, 8 and 7-fold two-dimensional tilings. Z. Kristallogr.

Dr., S A R Hashmi and Dr., Pratibha Sharma and Navin, Chand (2008) Thermal and Rheological Behavior of Ultrafine Fly Ash Filled LDPE Composites. Journal of Applied Polymer Science, 107. pp. 2196-2202. ISSN 0021-8995

Dr., S A R Hashmi and Dr., U K Dwivedi (2008) SiC Dispersed Polysulphide Epoxy Resin Based Functionally Graded Material. POLYMER COMPOSITES. pp. 1-7. ISSN 0272-8397

Dr., Navin Chandra and Priya , Sharma and G.L. , Pashkov and E.N. , Voskresenskaya and S S, Amritphale and S, Narendra and Dr., Baghela (2008) Coal fly ash utilization: Low temperature sintering of wall tiles. Waste Management, 28. pp. 1993-2002. ISSN 0965-053X

Murari, Prasad and Sona, Saxena (2008) Multi-component sorption of Pb(II), Cu(II) and Zn(II) onto low-cost mineral adsorbent. Journal of Hazardous Materials, 154. pp. 221-229. ISSN 0304-3894

Murari, Prasad and Sona, Saxena (2008) Attenuation of divalent toxic metal ions using natural sericitic pyrophyllite. Journal of Environmental Management, 88. pp. 1273-1279. ISSN 0301-4797

Murari, Prasad and Sona, Saxena (2008) `Multi-component sorption of Pb(II), Cu(II) and Zn(II) onto low-cost mineral adsorbent’. Journal of Hazardous Materials, 154. pp. 221-229. ISSN 0304-3894

Murari, Prasad and S. , Saxena (2008) Attenuation of divalent toxic metal ions using natural sericitic pyrophyllite. Journal of Environmental Management, 88. pp. 1273-1279. ISSN 0301-4797

B K , Prasad and Mohini , Saxena and R K , Morchalle and Asokan, Pappu (2008) Plant Fibre Industrial Waste Reinforced Polymer Composites as a Potential Wood Substitute Material. Journal of Composite Materials.

B K , Prasad and Dr., O. P. Modi and A H , Yegneshwaran (2008) Wear Behaviour of Zinc-Based Alloys as Influenced by Alloy Composition, Nature of the Slurry and Traversal distance. Wear, 264. ISSN 0043-1648

B K , Prasad (2008) Sliding Wear Response of Spheroidal Graphite Cast Iron as influenced by Applied Pressure, Sliding Speed and Test Environment. Canadian Metallurgical Quarterly.

B K , Prasad and Dr., O. P. Modi (2008) Sliding Wear Response of Zinc-Based Alloy as affected by Suspended Solid Lubricant Particles in Oil Lubricant. . Tribology - Materials, Surfaces and Interfaces.

K.K., Pathak and P.D., Patil and A.R., Kalinadh and K.C. , Jain (2008) Comparison of Mesh Adaptivity Schemes in Finite Element Simulation of Tube Extrusion Process. Defence Science Journal,, 58. pp. 415-421. ISSN 0304-3894

Navin, Chand and Archana , Nigrawal and Deepak , Jain (2008) Dielectric Behavior of Maleic Anhydride Grafted Polypropylene (MAgPP) Modified Sisal Fiber Reinforced PP Composites. Journal of Natural Fibers. . pp. 270-288. ISSN 1544-0478

D.P., Mondal and E M, Vinod and S , Das and T S V C , Rao (2008) Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites. Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites, 15. pp. 41-50. ISSN 0971-4588

R.K., Morchale and Mohini , Saxena and S.R., Karade (2008) Redmud polymer composites substitute of wood. ibid. pp. 417-428.

R K , Morchalle and S.R., Karade and Mohini , Saxena (2008) Redmud polymer composite substitute of wood. Ibid. pp. 417-428.

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J S, Chauhan (2008) Prediction of springback in straight flanging using FEM. CMC, 136. pp. 1-7.

S, Akhtar and K.K., Pathak and S.S., Bhadauria (2008) R Cable Layout Design of Prestressed Concrete Beams Using L Neural Networks. Journal of Struct. Eng, 3. pp. 117-125.

Dr., Navin Chandra and U.K., Dwivedi (2008) Sliding wear and friction characteristics of sisal fiber reinforced polymer composites:effect of silane coupling agent and applied load. POLYMER COMPOSITES, 29. pp. 280-284. ISSN 0272-8397

Navin, Chand and M., Mehra (2008) Thermal and D C Conductivity Behavior of Fly ash Filled Polyaniline Composites Polymer. Plastics Technology and Engineering, 47. pp. 883-886.

Navin, Chand and A.M., Naik (2008) Development and High stress abrasive behavior of milled carbon fibre reinforced Epoxy gradient composites. POLYMER COMPOSITES, 29. pp. 1-9. ISSN 0272-8397

Navin, Chand and M.K., Sharma (2008) Development and sliding wear behavior of milled carbon fiber reinforced epoxy gradient composites. Wear, 264. pp. 69-74. ISSN 0043-1648

Navin, Chand and A., Nigrawal (2008) Development and electrical conductivity behavior of copper-powder-filled-epoxy graded composites. Journal of Applied Polymer Science, 109. pp. 2384-2387. ISSN 0021-8995

A., Chrysanthou and Dr., O. P. Modi and Li, Han and N. , Ramakrishnan and J.M., O'Sullivan (2008) Formation and microstructure of (Ti, V) C-Reinforced iron matrix composites using self propagating high-temperature synthesis. International Journal of Materials Research, 99. pp. 281-286. ISSN 1862-5282

Navin, Chand and U.K ., Dwivedi (2008) Influence of Wood Flour Loading on Tribological Behavior of Epoxy Composites. POLYMER COMPOSITES, 29. pp. 1189-1192. ISSN 0272-8397

U.B., Kodukula and Y.R., Murthy and K.K., Rao and N. , Ramakrishnan and P., Biral and P.C, Naganoor and R., Venugopal (2008) Studies on water-injection cyclone for processing iron ore fines. Minerals & Metallurgical Processing, 25. pp. 79-84.

S., Lamba and A., Pandit and S.K., Sanghi and V.S., Gowri and A., Tiwari and V., Baderia and D., Singh and P., Nigam (2008) Determination of aliphatic amines by high performance liquid chromatography-ampromatric detection after derivatization with napthaline -2, 3 dicarboxaldehyde. Analytica Chemica Acta, 614. pp. 190-195.

G., Mary and Navin, Chand and S.K., Bajpal (2008) A Novel approach to prepare Zn (II) loaded Cotton fibres with antibacterial Property. Journal of Macromolecular Science, 45. pp. 795-803.

D.P., Mondal and E.M., Vinod and S , Das and T.S.V.C, Rao (2008) High stress abrasive behavior of shot peened AA2014A1-alloy. Ind J of Engineering and Materials Sciences, 15. pp. 41-50.

B., Srivathsa and N. , Ramakrishnan (2008) An analytical model for explosive compaction of powder to cylindrical billets through axial detonation. CMC- Computers Materials & Continua, 7. pp. 9-23. ISSN 1546-2218

D.P., Mondal and Goel, M.D and S , Das (2008) Effects of Strain Rate and Relative Density on Compressive Deformation Behaviour of Closed Cell Aluminum–Fly Ash Composite Foam. Materials & Design.

S , Das and Singh, I.B. and Singh, M and D.P., Mondal (2008) Influence of SiC Particle Addition on the Corrosion Behaviour of 2014 Al-Cu Alloy in 3.5% NaCl Solution. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Xu, H and Murari, Prasad and Liu, Yu (2008) Schorl: A Novel Catalyst in Mineral–Catalyzed Fenton-Like System for Dyeing Wastewater Discoloration. Journal of Hazardous Materials. ISSN 0304-3894

D.P., Mondal and S , Das and Vinod, E.M and Rao, T.S.V.C (2008) High Sress Abrasive Wear Behaviour of Shot Peened AA2014 Al-Alloy. Indian Journal of Engineering Materials Science.

S , Das and D.P., Mondal and N. , Ramakrishnan and Sawla, S (2008) Synergic Effect of Reinforcement and Heat Treatment on the Two-Body Abrasive Wear of an Al–Si Alloy under Varying Loads and Abrasive Sizes. Wear. ISSN 0043-1648

B K , Prasad (2008) Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environmen. Tribology- Materials, Surfaces and Interfaces.

Singh, I.B. and Sinha, A.S.K and Ruhi, G. and Dr., O. P. Modi (2008) Effect of Sintering Temperature on Corrosion and Wear Properties of Sol-Gel Alumina Coatings on Surface Pre-Treated Mild Steel. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Panthi, S.K. and Chouhan, J.S and DasGupta, R and N. , Ramakrishnan (2008) Study of Effect of Load on Springback in Sheet Metal Bending. Transactions of the Indian Institute of Metals.

Meenal, H and DasGupta, R (2008) High Stress Abrasive Wear Behaviour of Al-2014 alloy and its SiC Composite. International Journal of Microstructure and Materials Properties.

Chandra, N and S S, Amritphale and Baghel, N.S and Voskresenskaya, E.N and Pashkov, G.L. and Sharma, P (2008) Coal Fly Ash Utilization: Low Temperature Sintering of Wall Tiles. Waste Management.

Nigam, P and Singh, D.K and Lamba, S and Pandit, A and Baderia, V.K. and Tiwari, A and Gowri, V.S and Sanghi, S.K. (2008) Determination of Aliphatic Amines by High-Performance Liquid Chromatography-Amperometric Detection After Derivatization with Naphthalene-2,3-Dicarboxaldehyde. Analytica Chimica Acta. ISSN 0003-2670

Murari, Prasad and Saxena, S (2008) Attenuation of Divalent Toxic Metal Ions Using Natural Sericitic Pyrophyllite. Journal of Environmental Management. ISSN 0301-4797

Chand, N and Sharma, M.K (2008) Development and Sliding Wear Behavior of Milled Carbon Fibre Reinforced Epoxy Gradient Composites. Wear. ISSN 0043-1648

Chand, N and Nigrawal, A (2008) Investigations on DC Conductivity Behaviour of Milled Carbon Fibre Reinforced Epoxy Graded Composites. Bulletin of Materials Science. ISSN 0250-4707

Chand, N and Jain, D and Nigrawal, A (2008) Dielectric Behaviour of Maleic Anhydride Grafted Polypropylene (MA-g-PP) Modified Sisal Fibre Reinforced PP Composites. Journal of Natural Fibres.

Bajpai, S.K and Chand, N and Mary, G (2008) A Novel Approach to Prepare Zn(II) Loaded Cotton Fibres with Antibacterial Property. Journal of Macromolecular Science Part A.

Majumdar, A.K and J P, Barnwal and Banerjee, P and Jain, R (2008) Development of a New Proximate Analysis Based Correlation to Predict Calorific Value of Coal. Fuel.

DasGupta, R and Meenai, Humaira (2008) High Stress Abrasive Wear Behaviour of Al-2014 alloy and its SiC Composite. International Journal of Microstructure and Materials Properties.

Subhraminiuam, Anandha and Lord, E.A (2008) Pentagonal and trigonal quasilattices and their approximants. Z. Kristallogr.

Saxena, S and N. , Ramakrishnan (2007) A Comparison of Micro, Meso and Macro Scale FEM Analysis of Ductile Fracture in a CT Specimen (Mode I). Computational Materials Science.

Dr., Jeeshan Khan and Dr., S S Amrithphale and Dr., Navin Chandra (2007) A noble binder free and energy efficient process for making ceramic tiles using red mud and sericitic pyrophyllite. Indian Journal of Chemical Technology.. pp. 420-427. ISSN 0971-457X

B K , Prasad (2007) Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions. Wear, 262. pp. 262-273. ISSN 0043-1648

Dr., S A R Hashmi and Dr., Takeshi Kitano (2007) Effects of State Change of Liquid Crystalline Polymer on Dynamic Visco-Elasticity of its Blends with Polyethylene-Terephthalate. Applied Rheology, 17 (6). pp. 64510-1. ISSN 1430-6395

Dr., Takeshi Kitano and Dr., S A R Hashmi (2007) Shear Rate Dependence of Viscosity and First Normal Stress Difference of LCP/PET Blends at Solid and Molten States of LCP. Journal of Applied Polymer Science, 104. pp. 2212-2218. ISSN 0021-8995

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2007) Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear, 262. pp. 1426-1432. ISSN 0043-1648

Murari, Prasad and Nidhi, Singhal and Neelmani , Gupta and Vineet, Kumar (2007) Modeling the sorption kinetics of divalent metal ions onto mineral adsorbent using integral method. Journal of Colloid and Interface Science, 313. pp. 423-427. ISSN 0021-9797

B K , Prasad and Dr., O. P. Modi and Dr., V P Deshmukh and Dr., A Chrysanthou and Dr., A K Shah (2007) Erosive-Corrosive Wear Behaviour of Fe-TiC and Cobalt-Based Layers Separately Deposited on En31 Steel. Materials Science and Technology, 23. pp. 910-916. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and Dr., D P Mondal and Dr., A H Yegneshwaran and Dr., Pallavi Pandit and Dr., A Chrysanthou (2007) High-Stress Abrasive Wear Response of 0.2% Carbon Dual Phase Steel: Effects of Microstructural Features and Experimental Conditions. Materials Science and Engineering A. pp. 303-311. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., S. Rathod and Dr., A K Jha and Dr., G. Dixit (2007) The influence of alumina particle reinforcement and test parameters on dry sliding wear behaviour of zinc-based alloy. Tribology International, 40. pp. 1137-1146. ISSN 0301-679X

DasGupta, R and Swati , Lahiri and A K , Jha and M V R L, Murthy (2007) Selecting an area for technological intervention in the rural sector in India. The Social Science Journal, 44. pp. 187-193. ISSN 1833-1882

Navin, Chandra and Sanjeev, Bhasin and Meenakshi , Sharma and Deepti, Pal (2007) A room temperature process for making Mn2O3 nano-particles and γ-MnOOH nano-rods. Materials Letters, 61. 3728-3732.. ISSN 0167-577X

Dr., Navin Chandra and Meenakshi , Sharma and Sanjeev, Bhasin and Deepti, Pal and S S, Amritphale and T.S.V.C, Rao (2007) Effect of Addition of Talc Mineral on Sintering Characteristics of Pyrophyllite Based Ceramic Tiles Using a phosphjatic binder. Silicates Industriels, 72. pp. 301-310. ISSN 0037-5225

Dr., Sanjeev Saxena and Dr., N Ramakrishnan and Dr., B K Dutta and Dr., P Rama Rao (2007) Large deformation FEM analysis of ductile fracture. ICCES, 4. pp. 147-152.

Dr., S.A.R. Hashmi and Dr., U.K. Dwivedi (2007) Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites. Journal of Polymer Research, 14. pp. 75-81.

Navin, Chand and Dr., U.K. Dwivedi and Dr., S.K. Acharya (2007) Anisotropic abrasive wear behaviour of bamboo (Dentrocalamus strictus). Wear, 262. pp. 1031-1037. ISSN 0043-1648

Dr., S K PATEL and Dr., R B PATEL and Dr., A AWADHIA and Navin, Chand and Dr., S L AGRAWA (2007) Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes. Indian Academy of Sciences, 69. pp. 465-475.

Dr., A K Majumder and Dr., H Shah and Dr., P Shukla and J P, Barnwal (2007) Effect of operating variables on shape of ‘‘fish-hook’’ curves in cyclones. Minerals Engineering, 20. pp. 204-206.

Umesh , K dwivedi and Ajay , Ghosh and Navin, Chand (2007) Abrasive wear behaviour of bamboo powder filled polyester composite. bamboo composites, 7. pp. 693-698.

Asokan, Pappu and Mohini , Saxena and Shyam R. , Asolekar (2007) Solid wastes generation in India and their recycling potential in building materials. Indian Journal Of Environmental Protection . pp. 2311-2321.

D.P., Mondal and Dr., Dushyant Singh and Dr., K P Saha (2007) Development of mathmatical model for prediction of abrasive wear behaviour in agriculture grade medium carbon steel. Anisotropic abrasive wear behaviour of bamboo , 18. pp. 125-136.

Sanjeev, Saxena and D.S., Ramachandra Murthya (2007) On the accuracy of ductile fracture assessment of through-wall cracked pipes. Engineering Structures,, 29. pp. 789-801.

K., Udaya Bhaskar and Y., Udaya Bhaskar and N. , Ramakrishnan and J.K. , Srivastava and Supriya, Sarkar (2007) CFD validation for flyash particle classification in hydrocyclones. Minerals Engineering, 20. pp. 290-302.

Navin, Chand and A, Naik and H. K, Khaira (2007) Development of UHMWPE modified PP/PET blends and their mechanical and abrasive wear behavior. POLYMER COMPOSITES, 28. pp. 267-272. ISSN 0272-8397

Navin, Chand and U.K ., Dwivedi (2007) Influence of fiber orientation on high stress wear behavior of sisal fiber reinforced epoxy composites. POLYMER COMPOSITES. pp. 437-441. ISSN 0272-8397

Navin, Chand and A., Naik (2007) Abrasive wear studies on maleic anhydride modified PP and PET Blends. J Engineering Tribology., 221. pp. 489-499.

A. K., Majumder (2007) Settling velocities of particulate systems-a critical review of some useful models. Minerals and Metallurgical Processing,, 24. pp. 237-242. ISSN 2163-1573

A. K., Majumder and K.S., Bhoi and J P, Barnwal (2007) Multi gravity separator: an alternate gravity concentrator to process coal fines. Minerals and Metallurgical Processing,, 24. pp. 133-138. ISSN 2163-1573

A. K., Majumder and V., Tiwari and J P, Barnwal (2007) Separation characteristics of coal fines in a Knelson concentrator-A Hydrodynamic Approach. Coal Preparation, 27. pp. 126-137. ISSN DOI:10.1080/07349349108960564

Dr., O. P. Modi and S., Rathod and B K , Prasad and A K , Jha and G., Dixit (2007) The Influence of Alumina Particle Dispersion and Test Parameters on Dry Sliding Wear Behaviour of Zinc-based Alloy. Tribology International, 40. pp. 1137-1140. ISSN 0301-679X

D.P., Mondal and N. , Ramakrishnan and K.S., Suresh and S , Das (2007) On the moduli of closed cell aluminum foam. Scripta Materialia, 57. pp. 929-932.

K.K., Pathak and N. , Ramakrishnan (2007) Optimization of Die Angle and ram Velocity for Rod Extrusion Using Dynamic Material Modeling and Generic Algorithm. Indian jounral of engineering and material sciences, 14. pp. 399-402. ISSN 0971-4588

B K , Prasad (2007) Sliding Wear Response of Cast Iron as Influenced by Micro structural Features and Test Condition. Materials Science and Engineering A, 456. pp. 373-385. ISSN 0921-5093

V., Rajput and D.P., Mondal and S , Das and A K , Jha and N. , Ramakrishnan (2007) Effect of Si Cp addition on age hardening of aluminum composite and close cell aluminum composite foam. J Mater Sci, 42. pp. 7408-7414. ISSN .1007/s10853-007-1837-x

S., Sawla and S , Das and D.P., Mondal and N. , Ramakrishnan (2007) Microstructure and mechanical properties of Al alloy and Al alloy Si Cp composite foam. Trans Indian Inst Met, 60. pp. 495-504.

S. , Saxena and N. , Ramakrishnan and J S, Chauhan (2007) Prediction of smooth elbow behavior using FEM. Trans Indian Inst Met Engineering, 60. pp. 553-558.

N., Singhal and Murari, Prasad and N., Gupta and V., Kumar (2007) Modeling of sorption kinetics of divalent metal ions onto mineral absorbent using integral method. J of colloid and Interface Science, 313. pp. 423-427.

B K , Prasad (2007) Dry sliding wear response of zinc-based alloy over a range of test speeds and loads: a comparative study with cast iron. tribology letters, 25. pp. 103-115. ISSN 1023-8883

I. B., Singh and K., Chaturvedi and R. K., Mochhale and A H , Yegneshwaran (2007) Thermal treatment of toxic metals of industrial hazardous wastes with fly ash and clay. Journal Hazardous Materials, 141. pp. 215-222.

Navin, Chand and U.K ., Dwivedi (2007) Development and tribological behaviour of UHMWPE filled epoxy gradient composites. Wear, 262. pp. 184-190. ISSN 0043-1648

Navin, Chand and U.K ., Dwivedi (2007) High stress abrasive wear study on bamboo Journal of materials processing technology. Journal of materials processing technology, 183. pp. 155-159.

Sanjeev, Saxena and N. , Ramakrishnan (2007) A comparison of micro, meso and macroscale FEM analysis of ductile fracture in a CT specimen (mode I). Computational Material Science, 39. pp. 1-7.

K.K., Pathak and D.K., Segal and Saleem, Akhtar and S.S., Bhadauria (2007) A review of structure shape optimization techniques. Journal of Structural Engineering, 33 (6). pp. 505-514.

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J.S., Chouhan (2007) An analysis of spring back in sheet metal bending using finite method (FEM.). Journal of Materials Processing Technology, 186. pp. 120-124.

K. Udaya, Bhaskar and Y., Ramamurthy and M. Ravi, Raju and Sumit, Tiwari and J.K., Shrivastava and N. , Ramakrishnan (2007) CFD simulation and experimental validation studies on hydrocyclone. Minerals Engineering. pp. 60-71. ISSN 1754-890X

A. K., Majumder and H., Shah and P., Shukla and J P, Barnwal (2007) Effect of operating variables on shape of “fish-hook” curves in cyclones. Minerals Engineering, 20. pp. 204-206. ISSN 1754-890X

Ahirwar, R. S. (2007) progress Report 2007-09. annual report 2007-09.

Dhillon, P.H and Kundu, A.K and Majumdar, A.K and Choubey, S and J P, Barnwal and Shah, H (2007) Applicability of a Dense Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel. International Journal of Coal Preparation and Utilization.

Saxena, S and Xu, H and Murari, Prasad (2007) Multi-Component Sorption of Pb(II), Cu(II) And Zn(II) on to Low-Cost Mineral Adsorbent. Journal of Hazardous Materials. ISSN 0304-3894

D.P., Mondal and N. , Ramakrishnan and Suresh, K.S. and S , Das (2007) Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A. ISSN 0921-5093

S , Das and Suresh, K.S. and N. , Ramakrishnan and D.P., Mondal (2007) On the Moduli of Closed-Cell Aluminum Foam. Scripta Materialia.

Jha, A.K and N. , Ramakrishnan and S , Das and D.P., Mondal and Rajput, V (2007) Effect of SiCp Addition on Age-Hardening of Aluminium Composite and Closed Cell Aluminium Composite Foam. Journal of Materials Science. ISSN 0022-2461

Yegneswaran , A.H. and Singh, I.B. and Chaturvedi, K and Morchhale, R.K. (2007) Thermal Immobilization of Toxic Metals of Industrial Waste with Clay and Fly Ash. Journal of Hazardous Materials. ISSN 0304-3894

Singh, I.B. and Chaturvedi, K and Dr., A H Yegneshwaran (2007) Thermal Immobilization of Cr, Cu and Zn of Galvanizing Waste in the Presence of Clay and Fly Ash. Environment and Technology.

Gupta, N and Mandloi, D and S S, Amritphale and Chandra, N and Sirkarwar, A (2007) Removal of Heavy Metals Using Hybrid Precursor Prepared from Agro Residue (Rice Husk). Journal of Environmental Research and Development-1.

S S, Amritphale and N. , Ramakrishnan and Chandra, N and Anshul, A (2007) Development of Celsian Ceramics from Fly Ash Useful for X-Ray Radiation Shielding Applications. Journal of European Ceramic Society.

S S, Amritphale and Chandra, N and Anshul, A and N. , Ramakrishnan (2007) A Novel Process for Making Radiopaque Materials Using Bauxite-Red Mud. Journal of European Ceramic Society.

Singhal, N and Murari, Prasad and Gupta, N and Kumar, V (2007) Modeling the Sorption Kinetics of Divalent Metal Ions on to Mineral Adsorbent Using Integral Method. Journal of Colloidal and Interface Science.

Saxena, S and N. , Ramakrishnan (2007) Characterizing Crack Initiation Load in Circumferentially Through-Wall Cracked Elbows under Bending Load. International Journal of Pressure Vessels and Piping.

Chand, N and Naik, A.M. and Khaira, H.K. (2007) Development of UHMWPE Modified PP/PET Blends and Their Mechanical and Abrasive Wear Behaviour. POLYMER COMPOSITES. ISSN 0272-8397

Chand, N and Dwivedi, U.K and Hashmi, S.A.R (2007) Graphite Modified Cotton Fibre Reinforced Polyester Composites under Sliding Wear Conditions. Wear. ISSN 0043-1648

Dwivedi, U.K and Ghosh, A and Chand, N (2007) Abrasive Wear Behaviour of Bamboo (Dendrocalamus Strictus) Powder Filled Polyester Composites. Bio Resources. ISSN 1930-2126

Hashmi, S.A.R and Kitano, T (2007) Effect of State Change of Liquid Crystalline Polymer on Dynamic Visco-Elasticity of Its Blends with Polyethylene-Terephthalate. Applied Rheology. ISSN 1430-6395

Hashmi, S.A.R and Kitano, T (2007) Shear Rate Dependence of Viscosity and First-Normal-Stress-Difference of LCP/PET Blends at Solid and Molten States of LCP. Journal of Applied Polymer Science. ISSN 0021-8995

Majumdar, A.K and Tiwari, A and J P, Barnwal (2007) Separation Characteristics of Coal Fines in a Knelson Concentrator – A Hydrodynamic Approach. Coal Preparation. ISSN DOI:10.1080/07349349108960564

B K , Prasad (2007) Dry sliding wear response of a Zn-based alloy con6taining 37.5 % al as affected by sliding conditions. Zeitschrift fur metallkunde.

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2006) Friction and sliding wear of UHMWPE modified cotton fibre reinforced polyester composites. tribology letters, 21 (2). ISSN 1023-8883

Dr., S A R Hashmi and Dr., A Naik and Navin, Chand (2006) Effects of hybrid composition of LCP and glass fibres on abrasive wear of reinforced LLDPE. Bulletin of Materials Science, 29. pp. 49-54. ISSN 0250-4707

Dr., S A R Hashmi (2006) Attaining a Controlled Graded Distribution of Particles in Polymerizing Fluid for Functionally Graded Materials. Journal of Applied Polymer Science, 99. pp. 3009-3017. ISSN 0021-8995

Dr., S A R Hashmi and Dr., U K Dwivedi (2006) Simulation of Compositional Profile in Functionally Graded Materials. POLYMER ENGINEERING AND SCIENCE. pp. 1-7. ISSN 0032-3888

B K , Prasad (2006) Slurry Wear Behavior of Zinc-Based Alloys: Influence of Some Material and Test Parameters. tribology letters, 21. pp. 113-119. ISSN 1023-8883

B K , Prasad (2006) Influence of Alumina Dispersoid and Test Parameters on Erosive Wear Behaviour of a Cast Zinc-Aluminium alloy. Wear, 260. pp. 895-902. ISSN 0043-1648

M D , Omprakash and Sachin, Bansal and N, Saha (2006) 2. Assessing Direct Benefit-Cost Ratio of Watershed Treatment in Private Land: A case Study from dry districts of Karnataka. Journal of rural Technology, 3 (1).

Murari, Prasad and Sona, Saxena (2006) Radionuclide Sorption onto Low-Cost Mineral Adsorbent. Ind. Eng. Chem. Res, 45. pp. 9122-9128. ISSN 0888-5885

Murari, Prasad and Sona, Saxena (2006) `Radioneuclide sorption onto low-cost mineral adsorbent’. Ind. Eng. Chem. Res., 45. pp. 9122-9128. ISSN 0888-5885

Asokan, Pappu and Mohini, Saxena and R. , Asolekar (2006) Jarosite characteristics and its utilisation potentials. Science of the Total Environment,, 359. ISSN 1879-1026

Mohini , Saxena and Lokesh Kumar, Dhimole (2006) Utilization and value addition of copper tailing as an extender for developent of paints. Journal of Hazardous Materials B, 129. pp. 50-57. ISSN 0304-3894

M., Singh and D.P., Mondal and S , Das (2006) Abrasive wear response of aluminium alloysillimanite particle reinforced Composite under low stress condition. Material Science and Engineering A, 419. pp. 59-68. ISSN 0921-5093

K., Venkateshwarlu and Ajay Kumar , Ray and Manoj Kumar, Gunjan and D.P., Mondal and L.C., Pathak (2006) Pathak Tribological wear behavior of diamond reinforced composite coating. Material Science and Engineering A, 418. pp. 357-363. ISSN 0921-5093

Navin, Chand and Deepak , Jain (2006) Effect of temperature on electrical behavior of flyash-filled epoxy gradient composites. Journal of Applied Polymer Science, 100. pp. 1269-1276. ISSN 0021-8995

D.P., Mondal and S , Das (2006) High Stress abrasive wear behavior of aluminium hard particle composites: Effect of experimental parameters, particle size and volume fraction. Tribology International, 39. pp. 470-478. ISSN 0301-679X

K.K., Pathak and Apurva, Sharma and S., Shrimanth (2006) Elasto-plastic shape optimization of a cantilever beam. Journal of Structural Engineering, 32 (6). pp. 469-473.

S S, Amritphale and Sanjeev, Bhasin and Dr., Navin Chandra (2006) Energy efficient process for making pyrophyllite-based ceramic tiles using phosphoric acid and mineralizers. Ceramics International , 32. pp. 181-187. ISSN 0272-8842

H., Shah and A. K., Majumder and J P, Barnwal (2006) Development of water split model for a 76 mm hydrocyclone. Minerals Engineering, 19. pp. 102-104. ISSN 1754-890X

Y.L., Saraswathi and S , Das and D.P., Mondal (2006) Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites. Materials Science & Engineering A, 425. pp. 244-254.

S.A.R., Hashmi and Takeshi, Kitano (2006) Rheology of LCP/PET Blends at Solid and Molten States of LCP. Applied Rheology, 16. pp. 152-160. ISSN 1430-6395

DasGupta, R and Humaira , Meenai and M.S., Yadav (2006) Microstructural evolution and phase precipitation on ageing Al-Cu alloy. Int.J Microstructure and Materials properties, 1. pp. 149-160. ISSN 1741-8410

Asokan, Pappu and Mohini , Saxena and Shayam R. , Asolekar (2006) Hazardous Jarosite use in advance non-hazardous product for engineering application. Journal of Hazardous Materials, 137. pp. 1589-1599. ISSN 0304-3894

Gazala, Ruhi and Dr., O. P. Modi and I. B., Singh and A K , Jha and Dr., A H Yegneshwaran (2006) Wear and electrochemical characterization of sol-gel alumina coating on chemically pre-treated mild steel substrate. Surface and Coatings Technology, 201. pp. 1866-1872.

Navin, Chand and U.K ., Dwivedi (2006) Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites. Wear, 261. pp. 1057-1063. ISSN 0043-1648

S.A.R., Hashmi and U.K ., Dwivedi (2006) Simulation of Compositional Profile in Functionally Graded Materials. POLYMER ENGINEERING AND SCIENCE. pp. 1660-1666. ISSN 0032-3888

Sorna, Gowri and Jean, Louis and Rafaele , Viovy and Claus , Fitterer (2006) Vers Une puce microfluidique pour la detection de mutations inconnues et le genotypage. Houille Blanck, 5. pp. 40-44. ISSN 0018-6368

D.P., Mondal and N. , Ramakrishnan and S , Das (2006) FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites. Material Science & Engineering A, 433. pp. 286-290.

D.P., Mondal and N. , Ramakrishnan and N.V., Ganesh and V.S., Muneshwar and S , Das (2006) Effeat of SiC concentration and strain rate on the compressive deformation behavior of 2014A1-SiCp composite. Materials Science & Engineering A, 433. pp. 18-31.

K., Venkateshwarlu and S., Mohapatra and R.G. , Rao and A.K., Ray and L.C., Pathak, and D.P., Mondal (2006) High abrasive wear response of diamond reinforced composite coating:a factorial design approach. tribology letters, 24. pp. 7-14. ISSN 1023-8883

B K , Prasad (2006) Sliding wear response of a cast iron under varying test environments and traversal speed and pressure conditions. Wear, 260. pp. 1333-1341. ISSN 0043-1648

J P, Barnwal and A.K., Majumdar and B., Govindarajan (2006) Modeling of coal flotation in a batch and continuous cell operation Coal Preparation. Coal Preparation, 26. pp. 123-136. ISSN DOI:10.1080/07349349108960564

A. K., Majumder and H., Shah and J P, Barnwal (2006) Comparative study on managemegnetite medium stability in a vorsyl separator and in a heavy medium cyclone. Coal Preparation, 26. pp. 165-179. ISSN DOI:10.1080/07349349108960564

A. K., Majumder and G.J., Lyman and M., Brennan and P.N., Holtham (2006) Modeling of Flowing Film Concentrators - Part 1. Water Split Behaviour. Int J Mineral Processing, 80. pp. 71-77. ISSN 0301-7516

Dr., Takeshi Kitano and Dr., S A R Hashmi and Navin, Chand (2005) Influence of steady shear flow on dynamic viscoelastic properties of un-reinforced and Kevlar, glass fibre reinforced LLDPE. Bulletin of Materials Science, 27. pp. 409-415. ISSN 0250-4707

B K , Prasad (2005) Effectiveness of an Externally Added Solid Lubricant on the Sliding Wear Response of a Zinc–Aluminium Alloy, Its Composite and Cast Iron. tribology letters, 18. pp. 135-143. ISSN 1023-8883

B K , Prasad (2005) Sliding Wear Response of a Zinc-Based Alloy and Its Composite and Comparison with a Gray Cast Iron: Influence of External Lubrication and Microstructural Features. Materials Science and Engineering A,. pp. 427-439. ISSN 0921-5093

B K , Prasad (2005) Effects of Heat Treatment on the Lubricated Sliding Wear Behaviour of Zinc–Based Alloy Containing Nickel under Varying Test Conditions. Zeitschrift Fur Metallkunde. pp. 1321-1327. ISSN 1862-5282

Dr., Navin Chandra and Nitin, Agnihotri and Sanjeev, Bhasin and A.F. , Khan (2005) Effect of addition of talc on the sintering characteristics of fly ash based ceramic tiles. Journal of the European Ceramic Society, 25. pp. 80-88. ISSN 0955-2219

Dr., Navin Chandra and Nitin, Agnihotri and Priya , Sharma and Sanjeev, Bhasin and S S, Amritphale (2005) Separation of lead ions from aqueous solutions by adsorption at talc surface. Journal of Scientific & Industrial Research, 64. pp. 674-678. ISSN 0022-4456

Dr., S A R Hashmi and Dr., U K Dwivedi and Dr., D Jain and Dr., A Naik and Navin, Chand (2005) Graphite–Epoxy Graded Material by Centrifugation. Journal of Applied Polymer Science, 96. ISSN 0021-8995

Asokan, Pappu and Mohini , Saxena and R. , Asolekar (2005) Coal combustion residues—environmental implications and recycling potentials. Resources, Conservation and Recycling, 43. ISSN 0921-3449

Manjusha, Shelke and S.K., Sanghi and Amit, Asthana and Sushma, Lamba and Meenakshi , Sharma (2005) Fast seperation and sensitive detection of carcinogenic aromatic amines by reversed phase liquid chromatography coupled with electrochemical detection. Journal of chromatography A, 1089. pp. 52-58.

Sushma, Lamba and Sunil , Kumar Sanghi and Amit , Asthana and Manjusha, Shelke (2005) Rapid determination of sulfonamides in millk using micellar electrokinetic chromatography with fluorescence detection. Analytica Chimica Acta, 552. pp. 110-115. ISSN 0003-2670

D.P., Mondal and S , Das and V., Rajput (2005) Effect of zinc concentration and experimental parameters on high stress abrasive wear behaviour of A1-Zn alloys: A factorial design approach. Material Science and Engineering A, 406. pp. 24-33.

D.P., Mondal and S , Das and R.N., Rao and M., Singh (2005) Effect of SiC addition and running-in-wear on the sliding wear behaviour of Al–Zn–Mg aluminium alloy. Material Science and Engineering A, 402. pp. 307-319.

Y. L., Saraswathi and S , Das and D.P., Mondal (2005) Erosion-Corrosion Behavior of SiC Particle-Reinforced A1-Si Alloy in NaOH Slurry. Metallurgical and Material Trasactions A, 36A. pp. 2259-2262. ISSN 1073-5623

DasGupta, R and Humaira , Meenai (2005) Si-C particulate dispersed composite of am AlZn-Mg-Cu alloy: Property comparison With parent alloy. Materials Characterization, 54. pp. 438-445. ISSN 1044-5803

K. Udaya, Bhaskar and B., Govindarajan and J P, Barnwal and K.K., Rao and B.K., Gupta and T.C., Rao (2005) Classification studies of lead–zinc ore fines using water-injection cyclone. International Journal of Minereal Processing, 77. pp. 80-94.

I. B., Singh and K., Chaturvedi and D.R., Singh and Dr., A H Yegneshwaran (2005) Thermal Stabilization of Metal Finishing Waste with Clay. Environmental Technology, 26. pp. 877-883. ISSN 0959-3330

Amarjeet, Bajaj and Mohini , Saxena and Sangeeta, Shrivastava (2005) Allelopathic effect of Parthenium hysterophorus on the chlorophyll, nitrogen, protein and ascorbic acid content of lantana camara. Alleopathy Journal, 15. pp. 305-310.

DasGupta, R (2005) A Comparative Assessment of the Behavior of Al–Cu Alloy and Its Composite. Journal of Composite Materials, 39. pp. 1561-1575. ISSN 0267-0836

I. B., Singh and G., Venkatachari and D.R., Singh and M., Singh and Dr., A H Yegneshwaran (2005) Effect of Cr(VI)-Fe (II) interaction on the corrosion resistances of iron at different Ph in dichromate solutions. Indian journal of chemical technology . pp. 635-640. ISSN 0971-457X

K.K., Pathak and S., Panthi and N. , Ramakrishnan (2005) Application of Neural Network in Sheet Metal Bending Process. Defence Science Journal, 55. pp. 125-131. ISSN 0304-3894

Sanjeev, Saxena and D.S., Ramachandra Murthy (2005) Elastic-Plastic Fracture Mechanics based Prediction of fracture instability in a circumferentially through-wall cracked pipe in bending Trans. Indian Inst. Met., 58. pp. 461-466.

Ahirwar, R. S. (2005) Progress report 2005-2007. Annual report.

Navin, Chand and Dr., S A R Hashmi and Dr., S Lomash and Dr., A Naik (2004) Development of Asbestos Free Brake Pad. Journal MC, 85. pp. 13-16. ISSN 1054-2523

B K , Prasad (2004) Influence of Heat Treatment Parameters on the Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Wear. pp. 1137-1144. ISSN 0043-1648

Dr., Navin Chandra and Nitin, Agnihotri and Sanjeev, Bhasin (2004) Sintering characteristics of talc in the presence of phosphatic and alkali carbonate sintering activators. Ceramics International , 30. pp. 643-652. ISSN 0272-8842

Murari, Prasad and Sona, Saxena (2004) Sorption Mechanism of Some Divalent Metal Ions Onto Low-Cost Mineral Adsorbent. Ind. Eng. Chem. Res., 43. pp. 1512-1522.

Murari, Prasad and Sona, Saxena (2004) Sorption Mechanism of Some Divalent Metal Ions Onto Low-Cost Mineral Adsorbent. Ind. Eng. Chem. Res., 43. pp. 1512-1522. ISSN 0888-5885

Murari, Prasad and S S, Amritphale and I. B., Singh (2004) `Development of defluoridization techniques for its easy adaptability in rural areas’. Journal of Rural Technology . pp. 163-167.

Murari, Prasad and I. B., Singh (2004) ` Studies on Fluoride Removal Characteristics of Mineral (fluorapatite)’. Indian Journal of Chemistry. pp. 185-189. ISSN 0971-457X

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Jha and Dr., O. P. Modi (2004) Effect of Sand Concentration in the Medium and Traversal Distance and Speed on the Slurry Wear Response of a Zinc-Based Alloy Alumina Particle Composite. tribology letters, 17. pp. 301-309. ISSN 1023-8883

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and Dr., A K Shah and Dr., V. P. Deshmukh (2004) Effects of Material Composition and Microstructural Features on Dry Sliding Wear Behaviour of Fe-TiC Composite and a Cobalt-Based Stellite. tribology letters, 17. pp. 129-138. ISSN 1023-8883

B K , Prasad (2004) Sliding Wear Behaviour of Bronzes under Varying Material Composition, Microstructure and Test Conditions. Wear, 257. pp. 110-123. ISSN 0043-1648

B K , Prasad (2004) Wear Response of a Zinc-Based Alloy Containing Silicon as Influenced by Material Microstructure and Test Conditions. Materials Science and Engineering A, 367. pp. 63-73. ISSN 0921-5093

Sanjeev, Saxena and N. , Ramakrishnan (2004) Characterizing the crack initiation load in circumferentially through-wall cracked elbows under bending load. International Journal of Pressure Vessels and Piping,, 84. pp. 493-501. ISSN doi:10.1016/j.ijpvp.2007.04.001

A.K., Gupta and D. M. , JESUDAS and P.K., Das and K., Basu (2004) Performance Evaluation of different Types of Steel for Duck Foot Sweep Application. Biosystems engineering , 88. pp. 63-74. ISSN 1537-5110

Murari, Prasad and Saxena, Sona (2004) Sorption mechanism of some Divalent metal Ions Onto Low - Cost Mineral Adsorbent. Industrial & Engineering Chemistry Res.

Majumdar, A.K and J P, Barnwal (2004) Development of new coal washability index. Minerals Engineering. ISSN 1754-890X

S S, Amritphale and Bhasin, Sanjeev and Chandra, N (2004) Studies on sintering behavior of pyrophyllite based ceramic tiles using di-potassium phosphatic binder. Silicate Industriels.

Singh, I.B. and Murari, Prasad (2004) Study on the Fluoride removal characteristics of mineral (Fluorapatite). Indian journal of chemical technology . ISSN 0971-457X

Naskar, M.K and Chatterjee, M and Basu, K and Deya, A (2004) Effects of Processing Parameters on he fabrication of near - net - shape fibre reinforced oxide ceramic matrix composites via sol - gel route. Ceramics international.

DasGupta, R and Meenai, Humaira (2003) Sliding wear property of Al-Cu Based alloys with SiC particle reinforced Composites under varying Experimental Conditions. Materials Science letters.

DasGupta, R and Meenai, Humaira and S , Das (2003) Age hardening of Al 201-alloy and 2014-SiC composites. Journal of Materials Science Letters.

Yadav, M.S and D.P., Mondal and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad and DasGupta, R (2003) Effect of sillimanite particle Reinforcement on the dry sliding wears behavior of Aluminum alloy composite. Materials Science and Technology.

Dr., SOMIT NEOGI and Dr., S A R Hashmi and Navin, Chand (2003) Role of PET in improving wear properties of PP in dry sliding condition. Bulletin of Materials Science, 26 (6). ISSN 0250-4707

B K , Prasad (2003) Influence of Some Material and Experimental Parameters on the Sliding Wear Behaviour of a Zinc-Based Alloy, Its Composite and a Bronze. Wear. pp. 35-46. ISSN 0043-1648

B K , Prasad (2003) Microstructural Alterations Through Heat Treatment and Its Influence on Wear Response of a Silicon Containing Zinc-Based Alloy Under Different Test Conditions. Materials Science and Technology, 19. pp. 327-335. ISSN 0267-0836

B K , Prasad (2003) Dry Sliding Wear Response of a Zn-Based Alloy Containing 37.5% Al as Affected by Sliding Conditions. Zeitschrift Fur Metallkunde. pp. 897-902. ISSN 1862-5282

B K , Prasad (2003) Slurry Wear Characteristics of a Zinc-Based Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and H K , Khaira (2003) High-Stress Abrasive Wear Behaviour of a Zinc-Based Alloy and Its Composite Compared with a Cast Iron under Varying Track Radius and Load Conditions. Materials Science and Engineering A. pp. 343-354. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and A H , Yegneshwaran (2003) Low-Stress Abrasive Wear Behaviour of a 0.2% C Steel: Influence of Microstructure and Test Parameters. tribology letters, 15. pp. 249-255. ISSN 1023-8883

S S, Amritphale and Sanjeev, Bhasin and Dr., Navin Chandra (2003) Effect of pyrophyllite additions on sintering characteristics of fly ash based ceramic wall tiles. British Ceramic Transactions, 102. pp. 83-86. ISSN 0967-9782

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (2003) Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel. Wear, 254. pp. 120-128. ISSN 0043-1648

B K , Prasad (2003) The Effect of Heat Treatment on Sliding Wear Behaviour of a Zinc-Based Alloy Containing Nickel and Silicon. Tribology Letters, 15. pp. 333-341. ISSN 1023-8883

Dr., O. P. Modi and D.P., Mondal and B K , Prasad and Singh, M and Khaira, H.K. (2003) Abrasive Wear behaviour of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties. Material Science and Engineering A. ISSN 0921-5093

Hashmi, S.A.R and Chand, N and Kitano, Takeshi (2003) Dynamic Mechanical Behavior of LLDPE Composites Reinforced with Kevlar Fibers/Short Glass Fibers. POLYMER COMPOSITES. ISSN 0272-8397

Banerjee, P.K. and Rao, T.C. and Govindrajan, B and Bapat , J.P. and J P, Barnwal and Chatt erjee, S and Rao, P.V.T (2003) A plant comparision of the vorsyl separator and dense medium cyclone in the treatment of Indian coals. Int. J. Miner. Process.

Yerriswamy, P and Majumder, A.K. and J P, Barnwal and Govindrajan, B and Rao, T.C. (2003) Studies on Kelsey jig treating Indian coal fines. Mineral processing and Extractive metallurgy .

Majumdar, A.K and Yerriswamy, P and J P, Barnwal (2003) The "fish-hook" phenomenon in centrifugal separation of fine particles. Minerals Engineering. ISSN 1754-890X

Banerjee, P.K. and Rao, T.C. and J P, Barnwal and Rao, P.V.T and Bapat , J.P. and Chatt erjee, S and Govindrajan, B (2003) A plant comparison of the vorsyl separator and dense medium cyclone in the treatment of Indian Coals. International Journal of mineral processing.

Chen, Y.K. and Dr., O. P. Modi and Chrysanthou, A and Mahay, A.S. and O'Sullivan, J.M. (2003) The effect of different metallic counterface materials and different surface treatments on the wear and friction of polymide 66 and its composite in rolling-sliding contact. J. of Applied Ploymer Science.

B K , Prasad (2003) The effects of Heat treatment on sliding wear behaviour of a Zinc-based alloy containing Nickel and Silicon. tribology letters. ISSN 1023-8883

Singh, I.B. and Singh, D.R. (2003) Effect of pH on Cr - Fe interaction. Environmental Technology. ISSN 0959-3330

Subhraminiuam, Anandha (2003) Vacancy ordered phases in Al-Cu-Ni as quasi periodic superlattice approximants. Philosophical Magazine.

Tiwari, Sangeeta and Saxena, Mohini and Tiwari, Sandeep Kumar (2003) Mahua-Oil Based Resins for the High-Temperature Curing of Fly Ash Coatings. Journal of Applied Polymer Science. ISSN 0021-8995

Saxena, Mohini (2002) Preparation and characterization of penta alkyds based on mahua oil. J. of Scientific & Industrial Research.

Bhaskar, K.Udaya and Govindrajan, B and Venugopal, R and Jakho, M.R. and Rao, T.C. (2002) Performance and modeling studies of an MGS for graphite rejection in a lead concentrate. Int. J. Miner. Process.

Murari, Prasad (2002) `Rock phosphate deposits of Madhya Pradesh-Present status and Future Prospects'. Fertiliser News, February . pp. 25-28.

B K , Prasad and Dr., O. P. Modi and D.P., Mondal and Dr., M. Singh and Dr., H. K. Khaira (2002) Abrasive Wear Behaviour of a High Carbon Steel: Effect of Microstructure and Experimental Parameters and Correlation with Mechanical Properties. Materials Science and Engineering, 343. pp. 237-242. ISSN 0921-5093

B K , Prasad (2002) Abrasive Wear Characteristics of a Zinc-Based Alloy and Zinc-Alloy/ SiC Composite. wear, 252. pp. 250-263. ISSN 0043-1648

B K , Prasad (2002) Influence of Some Test Parameters on Dry Sliding Wear Characteristics of a Zinc-11.5% Aluminium Alloy. Journal of Materials Engineering and Performance,, 11. pp. 461-468. ISSN 1059-9495

Singh, I.B. and Singh, D.R. (2002) Adsorption Models for Sorption of Lead and Zinc on Françoise Mineral. Environmental Technology.

Murari, Prasad and Saxena, S and S S, Amritphale (2002) Adsorption Model for Sorption of Lead and Zinc on Francolite Mineral. Ind Eng.Chem.Res.2002.

S , Das and D.P., Mondal and Sawla, S and Dixit, S (2002) High Stress Abrasive Wear Mechanism of LM13-SiC Composite Under Varying Experimental Conditions. Metallurgical and Materials Transactions A. ISSN 1073-5623

Jha, A.K and Dr., O. P. Modi and D.P., Mondal and Singh, M (2002) Two-body abrasive wear behaviour of aluminium alloy-sillimanite particle reinforced composite. Wear. ISSN 0043-1648

Singh, I.B. and Singh, D.R. (2002) Influence of Dissolved Oxygen on Aqueous Cr(VI) Removal by Ferrous Ion. Environmental Technology.

Hashmi, S.A.R and Kitano, Takeshi and Chand, N (2002) Dynamic Viscoelasticity of Hybrid Kevlar and Glass Fiber Reinforced LLDPE in the Molten State. Polymer CompositesAugust.

Jha, A.K and Gachake, Arati and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran and Singh, M (2002) High Stress Abrasive Wear Behavior of Some Hardfaced Surfaces Produced by Thermal Spraying. Journal of Materials Engineering and Performance. ISSN 1059-9495

Vashishtha, S.R. and Chand, N and Hashmi, S.A.R (2002) Morphology of PS/PMMA blends and their solution rheology. Indian journal of chemical technology . ISSN 0971-457X

Hashmi, S.A.R and Kitano, T and Vashishtha, S.R. and Chand, N (2002) Organic/Inorganic hybrid fibre reinforced thermoplastic composites and their rheological properties. Indian Journal of Engineering & Materials Sciences.

Chand, N and Neogi, Somit (2002) Sliding wear behaviour of woven glass fibre reinforced polyester composites. Indian Journal of Engineering & Materials Sciences.

Murari, Prasad and Saxena, S and S S, Amritphale (2002) Cr (VI) removal in acidic aqueous solution using iron-bearing industrial solid wastes and their stabilization with cement. Ind Eng.Chem.Res.

Srinivasan, N and N. , Ramakrishnan (2002) Dynamic materials Modelling and finite element simulation of titanium alloy turbine disc forging. Materials Science and Technology. ISSN 0267-0836

DasGupta, R and Dr., O. P. Modi and Dr., A H Yegneshwaran and Yadav, M S (2001) Steady shear flow properties of organic fiber reinforced LLDPE. Journal of Materials Science Letters 20.

Dr., S A R Hashmi and Dr., SOMIT NEOGI and Dr., Anuradha Pandey and Navin, Chand (2001) Sliding wear of PP/UHMWPE blends: effect of blend composition. Wear, 247. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and A K , Jha and A K , Patwardhan (2001) Effects of Some Material and Experimental Variables on the Slurry Wear Characteristics of Zinc-Aluminium Alloys. Journal of Materials Engineering and Performance. pp. 75-80. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (2001) Wear Characteristics of a Zinc-Based Alloy Compared with a Conventional Bearing Bronze under Mixed Lubrication Condition: Effects of Material and Test Parameters. Canadian Metallurgical Quarterly, 40. pp. 193-210.

B K , Prasad and M, Singh and D.P., Mondal and A K , Jha (2001) Dry Sliding Wear Behaviour of an Aluminium Alloy-Granite Particle Composite. . Tribology International.

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and S , Das and Dr., D P Mondal and Dr., A H Yegneshwaran (2001) Erosion-Corrosion-Abrasion Characteristics of a Zinc-Based Alloy and Its Composite Containing Alumina Particle Dispersoid. Materials Science and Technology, 17. pp. 1444-1450. ISSN 0267-0836

Dr., Navin Chandra and Murari, Prasad and S. , Saxena and S S, Amritphale (2001) Detoxification of Aqueous Zinc Using Fluorapatite - Bearing Lean Grade Rock Phosphate. Environmental Technology, 22. pp. 367-371. ISSN 0959-3330

Murari, Prasad and S. , Saxena and S S, Amritphale and Dr., Navin Chandra (2001) `Adsorption of cyanide from aqueous solutions at pyrophyllite surface’. Separation and Purification Technology, 24. pp. 263-270. ISSN 1383-5866

B K , Prasad and Dr., O. P. Modi and Dr., R P Yadav and Dr., A K Jha and S , Das and Dr., A H Yegneshwaran (2001) Three Body Abrasion of a Zinc-Aluminium Alloy: Effects of Alumina Dispersoid and Abrasive Medium. Wear, 249. pp. 792-799. ISSN 0043-1648

S S, Amritphale and Dr., Navin Chandra and Sanjeev, Bhasin (2001) Optimisation of processing parameters for making pyrophyllite based ceramic tiles using di-sodium hydrogen phosphate binder. British Ceramic Transactions, 6. pp. 279-283. ISSN 0967-9782

Hashmi, S.A.R and Chand, N (2001) Dynamic mechanical behavior of LCP fiber/glass fiber-reinforced LLDPE composites. POLYMER COMPOSITES. ISSN 0272-8397

Chand, N and Hashmi, S.A.R (2001) Sliding wear of PP/UHMWPE blends: effect of blend composition. Wear. ISSN 0043-1648

Dr., O. P. Modi (2001) Two-body abrasion of a cast Al-Cu (2014 Al) alloy - Al2O3 particle composite : influence of heat treatment and abrasion test parameters. Wear. ISSN 0043-1648

Yegneswaran , A.H. and D.P., Mondal and Jha, A.K (2001) Effect of interlamellar spacing on the mechanical properties of 0.65% C steel. Materials Characterization.

B K , Prasad and Dr., O. P. Modi and Mondal, D P and S , Das and Jha, A.K and Dr., A H Yegneshwaran (2001) Erosion- corrosion- abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Material Science and Technology.

Raju, C.B and Jain, P.K. and Choudary, Shompa and Verma, S and Sahu, S.N (2001) Silicon nitride/SIAION ceramics - A review. Indian Journal of Engg. & Mat Science.

Singh, I.B. (2001) Hexavalent chromium removal using iron bearing industrial sludges. Indian journal of chemical technology . ISSN 0971-457X

DasGupta, R and Dr., O. P. Modi and Yadav, M S and Dr., A H Yegneshwaran (2001) Mechanisms of material removal under high stress abrasive wear conditions under varying experimental conditions. Journal of Materials Science Letters. ISSN 0261-8028

S , Das and D.P., Mondal (2001) Correlation of abrasive wear with microstructure and mechanical properties of pressure die-cast aluminum hard-particle composite. Met. And Mat. Transactions.

Dr., O. P. Modi and Yadav, R.P. and Mondal, D P and DasGupta, R (2001) Abrasive wear behavior of zinc-aluminium alloy - 10% Al2O3 composite through factorial design of experiment. J. of Materials Science.

Powell, MS and Morell, SS and Latchireddi, S (2001) Development in the understanding of South African styles SAG mills. Minerals Engineering. ISSN 1754-890X

Singh, I.B. (2001) Hexavalent chromium removal using iron bearing industrial sludges. Indian journal of chemical technology . ISSN 0971-457X

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran and Dr., R Dixit (2000) Erosion of a High Carbon Steel in Coal and Bottom Ash Slurries. Journal of Materials Engineering and Performance, 9. pp. 522-5269. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Patwardhan (2000) Tensile Properties of Some Copper and Zinc Based Alloys: Effects of Strain Rate and Test Temperature. Journal of Materials Engineering and Performance, 9. pp. 688-699. ISSN 1059-9495

Dr., Vineeta Jain and Dr., Alok Mittal and Navin, Chand and Dr., S A R Hashmi and Dr., J M Keller (2000) Air gap thermally stimulated discharge current on unstretched and stretched polypropylene film thermoelectret. Journal of Materials Science Letters, 19. pp. 523-527. ISSN 0261-8028

Dr., S A R Hashmi and Dr., Takeshi Kitano and Navin, Chand (2000) Dynamic Mechanical Behavior of LCP Fiber/Glass Fiber-Reinforced LLDPE Composites. POLYMER COMPOSITES, 22 (2). pp. 213-220. ISSN 0272-8397

B K , Prasad (2000) Effects of Partially Substituting Copper by Silicon on the Physical, Mechanical and Wear Properties of Zn-37.5% Al-Based Alloy. Materials Characterization. pp. 301-308. ISSN 1044-5803

B K , Prasad (2000) Effect of Microstructure on the Sliding Wear Performance of a Zn-Al-Ni Alloy. Wear, 240. pp. 100-112. ISSN 0043-1648

Dr., Navin Chandra and Sanjeev, Bhasin and S S, Amritphale (2000) Development of pyrophyllite based machinable ceramics. Silicates Industriels, 65. pp. 139-144. ISSN 0037-5225

Dr., Navin Chandra and S S, Amritphale and S. , Saxena and Murari, Prasad (2000) evaluation of aqueous copper removal by adsorption on low grade phosphate mineral surface. Indian Chem. Eng. Section A., 42. pp. 163-169. ISSN 0019-4506

Dr., Navin Chandra and S S, Amritphale and Murari, Prasad and S. , Saxena (2000) Kinetics and Isotherms for Aqueous Lead Adsorption by Natural Minerals. ndustrial & Engineering Chemistry Research , 39. pp. 3034-3037. ISSN 0888-5885

Dr., Navin Chandra and S S, Amritphale and Murari, Prasad and S. , Saxena and T.C., Rao (2000) Attenuation of heavy metal ions by lean grade phosphorite. Minerals Engineering, 13. pp. 1301-1305. ISSN 1754-890X

Navin, Chandra and S S, Amritphale and Murari, Prasad and S. , Saxena and T.C., Rao (2000) TECHNICAL NOTE ATTENUATION OF HEAVY METAL IONS BY LEAN GRADE PHOSPHORITE. Minerals Engineering, 13. pp. 1301-1305. ISSN 1754-890X

Murari, Prasad and S S, Amritphale and S. , Saxena and Navin, Chandra (2000) Separation of Lead Ions on Francolite Surfaces. SEPARATION SCIENCE AND TECHNOLOGY, 35. pp. 2431-2442. ISSN 0149-6395

Murari, Prasad and A. K., Majumder and T.C., Rao (2000) 'Reverse flotation of low grade sedimentary cherty-calcareous rock phosphate ore – An overview'. Minerals & Metallurgical Processing, 17. pp. 49-55.

Murari, Prasad and S. , Saxena and S S, Amritphale and Navin, Chandra (2000) `Evaluation of aqueous copper removal by adsorption on low grade phosphate mineral surface’. Indian Chemical Engineer Section A, 42. pp. 70-76. ISSN 0019-4506

Murari, Prasad and A. K., Majumder and T.C., Rao (2000) Mineralogical and beneficiation characteristics of a lean grade sliceous rock phosphate ore from Hirapur (M.P.).’. The Indian Mining & Engineering Journal, 39. pp. 21-24.

S S, Amritphale and Sanjeev,, Bhasin and Dr., Navin Chandra (2000) Preparation of Frit/Glaze from Drum Filter Cake-A Waste Generated by the Secondary Zinc Industry. Canadian ceramics, 69. pp. 27-30. ISSN 486-0945

Murari, Prasad and A. K., Majumder and T.C., Rao (2000) 'Reverse flotation of low grade sedimentary cherty-calcareous rock phosphate ore – An overview’. Minerals & Metallurgical Processing, 17. pp. 49-55.

Murari, Prasad and A. K., Majumder and T.C., Rao (2000) Mineralogical and beneficiation characteristics of a lean grade sliceous rock phosphate ore from Hirapur (M.P.).’. The Indian Mining & Engineering Journal, 39. pp. 21-24.

B K , Prasad (2000) Microstructure and Tensile Property Characterization of a Nickel Containing Zinc-Based Alloy: Effects of Heat Treatment and Test Conditions. Materials Science and Engineering A, 277A. pp. 95-101. ISSN 0921-5093

Dr., VINEETA JAIN and Dr., Alok Mittal and Navin, Chand and Dr., S A R Hashmi and Dr., J M Keller (2000) Air gap thermally stimulated discharge current on unstretched and stretched polypropylene film thermoelectret. Journal of Materials Science Letters,, 19. pp. 523-527. ISSN 0261-8028

S , Das and S, Gupta and D.P., Mondal and B K , Prasad (2000) Influence of Load and Abrasive Size on the Two-Body Abrasive Wear of Al-SiC Composites. Aluminium Transactions.

B K , Prasad and Dr., D P Mondal and DasGupta, R and S , Das (1999) Mechanism of Material Removal During Erosion-Corrosion of an Al-SiC Particle Composite. Wear, 236. 295-302. ISSN 0043-1648

Dr., S A R Hashmi and Navin, Chand (1999) Effect of addition of polycarbonateon sheared flow of red mud-filled isotactic polypropylene. Bulletin of Materials Science, 22 (4). pp. 801-804. ISSN 0250-4707

B K , Prasad and Dr., O. P. Modi and A K , Jha and DasGupta, R (1999) Influence of Material Characteristics on the Abrasive Wear Response of Some Hardfacing Alloys. Journal of Materials Engineering and Performance, 18. pp. 190-196. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A, Roy and DasGupta, R (1999) Effect of Experimental Factors on the High Stress Abrasive Wear Behaviour of Steels and a Software Package for its Prediction. Journal of Materials Engineering and Performance, 8. pp. 375-379. ISSN 1059-9495

B K , Prasad and DasGupta, R and Dr., O. P. Modi and A K , Jha (1999) A Comparison of Material Removal Mechanism under Low Stress Abrasive Condition of Steel and Hardfacing Alloys. Journal of Materials Engineering and Performance. pp. 437-442. ISSN 1059-9495

B K , Prasad (1999) Effects of Heat Treatment on the Partially Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Materials Transactions of Japan Institute of Metals, 18. pp. 578-585. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and S , Das and Dr., M. Singh (1999) Slurry Erosion-Corrosion of Aluminium (Al-Cu) Alloy - Silicon Carbide Composites: Effects of Some Material and Experimental Variables. Zeitschrift Fur Metallkunde, 90. pp. 189-194. ISSN 1862-5282

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and D.P., Mondal (1999) Erosion-Corrosion Characteristics of Squeeze Cast Aluminium Alloy SiC Composite in Water and Sodium Chloride Solutions Containing Sand. Materials Science and Technology, 15. pp. 933-938. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and DasGupta, R and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Sliding Wear Response of a Zinc-Aluminium Alloy as Affected by SiC Particle Dispersion and Test Conditions. Journal of Materials Science Letters, 18. pp. 1731-1734. ISSN 0261-8028

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran (1999) Wear Response of a Zinc-Based Alloy in the Presence of SiC Particle Reinforcement : A Comparative Study with a Copper Base Alloy. Journal of Materials Engineering and Performance, 8. pp. 693-700. ISSN 1059-9495

Dr., Navin Chandra and S S, Amritphale and Murari, Prasad and S. , Saxena (1999) Adsorption behavior of lead ions on Pyrophyllite surface. Main Group Metal Chemistry, 22. pp. 557-565. ISSN 0792-1241

Murari, Prasad and T.C., Rao (1999) Characteristics of a lean grade cherty - calcareous rock phosphate of Jhabua’. The Indian Mining & Engineering Journal, 38. pp. 19-26.

B K , Prasad and Dr., O. P. Modi and Dr., R. P. Yadav and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Microstructure and Wear Behaviour of Zinc-Aluminium Alloys: Effects of Secondary Processing and Alloy Composition. Zeitschrift Fur Metallkunde, 15. pp. 439-443. ISSN 1862-5282

Dr., S A R Hashmi and Dr., Takeshi Kitano and Dr., S. YAMAMOTO (1998) Development of poly(phenylene sulphide)-tubular-®bre-reinforced polypropylene composites and their mechanical and rheological properties. Journal of Materials Science Letters, 17. pp. 127-130. ISSN 0261-8028

Dr., O. P. Modi and B K , Prasad and Dr., A K Jha and DasGupta, R and Dr., G. Dixit and Dr., R. P. Yadav (1998) Effects of Swaging and Aluminium Content on the Microstructure and Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Materials Transactions of Japan Institute of Metals, 39. pp. 582-586. ISSN 1345--9678

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1998) Microstructure and Property Characterization of a Modified Zinc-Based Alloy and Comparison with Bearing Alloys. Journal of Materials Engineering and Performance, 7. pp. 130-135. ISSN 1059-9495

B K , Prasad (1998) Effect of Heat Treatment on Tensile Properties of Zinc-37.5 Mass % Aluminium Alloy Containing Nickel or Silicon. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

B K , Prasad and J P , Pandey (1998) Sliding Wear Response of Zinc-Based Alloy and Comparison to a Copper-Based Alloy. Metallurgical and Materials Transactions , 27A. pp. 1245-1255. ISSN 1073-5623

B K , Prasad and DasGupta, R and Dr., A K Jha and Dr., A H Yegneshwaran and Dr., O. P. Modi and S , Das (1998) Low Stress Abrasive Wear Behaviour of Hardfaced Steel. Journal of Materials Engineering and Performance, 7. pp. 221-226. ISSN 1059-9495

B K , Prasad (1998) Tensile Properties of Some Zinc-Based Alloys Comprising 27.5 Al: Effects of Alloy Composition, Microstructure and Test Conditions. Materials Science and Engineering A. pp. 257-266. ISSN 0921-5093

B K , Prasad and Dr., K Venkateswaralu and Dr., O. P. Modi and S , Das and Dr., A K Jha and Dr., A H Yegneshwaran and DasGupta, R (1998) Sliding Wear Behaviour of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions. Metallurgical and Materials Transactions A, 29A. pp. 2747-2752. ISSN 1073-5623

B K , Prasad and D.P., Mondal and S , Das (1998) Study of Erosive-Corrosive Wear Behaviour of an Aluminium Alloy Composite through Factorial Design of Experiments. Wear, 217A. pp. 1-6. ISSN 0043-1648

B K , Prasad (1998) Sliding Wear Response of Al-Cu Alloy: The Influence of SiC Particles reinforcement. Journal of Materials Science Letters, 17. pp. 1121-1123. ISSN 0261-8028

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and DasGupta, R and Dr., A Naik (1998) Two-Body Abrasion Characteristics of a Zinc-Based Alloy: Effects of SiC Particle Reinforcement and Related Factors. Journal of Materials Science Letters, 17. pp. 901-903. ISSN 0261-8028

B K , Prasad and Dr., K Venkateswaralu and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and S , Das (1998) Dry Sliding Wear Behaviour of a Zinc-Based Alloy: A Comparative Study with a Leaded-Tin Bronze. Materials Transactions of Japan Institute of Metals, 39. pp. 1121-1125. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Effects of Sand Concentration on Slurry Erosion of Steels. Materials Transactions of Japan Institute of Metals, 39. pp. 1185-1190. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran and S , Das and Dr., K Venkateswaralu (1998) Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 17. pp. 1381-1383. ISSN 0261-8028

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Hardfacing: A Technique for Combating Abrasive/Erosive Wear. Materials Transactions of Japan Institute of Metals, 39. pp. 1191-1196. ISSN 1345--9678

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1998) `Beneficiation of a lean grade siliceous rock phosphate ore from Hirapur, India’. Minerals & metallurgical processing, 15. pp. 54-56. ISSN 0747-9182

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1998) `Beneficiation of a lean grade siliceous rock phosphate ore from Hirapur, India’. Minerals & metallurgical processing, 15. pp. 54-56. ISSN 0747-9182

B K , Prasad and Dr., J P Pandey (1998) Sliding Wear Response of a Leaded-Tin Bronze: The Influence of the Counterface Material Characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

D.P., Patil and J R G, Andrews (1998) An analytical solution to continuous population balance model describing floc coalescence and breakage – A special case. Chemical Engg. Sc., 53. pp. 599-601.

Dr., O. P. Modi and Mohini , Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) Role of ally matrix and dispersoid on the corrosion behavior of cast aluminium alloy composites. Corrosion, 54. pp. 129-134. ISSN 0010-9312

B K , Prasad and J.P., Pandey (1998) Sliding wear5 response of a leaded-tin bronze : The influence of the counterface material characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

Mohini , Saxena and Arpana, Chauhan and Asokan, Pappu (1998) Flyash vermicompost from non-ecofriendly organic wastes. Pollution Research Paper, 17. pp. 5-11.

B K , Prasad and J P , Pandey (1998) Sliding wear behavior of a zinc based alloy compared with a leaded tin bronze. ibid. pp. 59-66.

B K , Prasad (1998) Response of Some Cast Zinc - 37.5% Al - Based Alloys Comprising Nickel/Silicon Under Different Tensile Loading Conditions. Journal of Materials Engineering and Performance. ISSN 1059-9495

Dr., O. P. Modi and M., Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) The Role of Alloy Matrix and Dispersoid on the Corrosion Behaviour of Cast Aluminium Alloy Composites. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Dry Sliding Wear Behaviour of a Modified Zinc-Based Alloy. Materials Transaction of Japan Institute of Metals, 38. pp. 197-204. ISSN 1345--9678

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of the Nature of Microconstituents on the Tensile Properties of a Zinc-Based Alloy and a Leaded-Tin Bronze at Different Strain Rates and Temperatures. Journal of Materials Science, 32. pp. 1169-1175. ISSN 0022-2461

B K , Prasad (1997) Dry Sliding Wear Response of Some Bearing Alloys as Influenced by the Nature of the Microconstituents and Sliding Conditions. Metallurgical and Materials Transactions , 28A. pp. 809-815. ISSN 1073-5623

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of Aluminium Content on the Physical, Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Zeitschrift Fur Metallkunde, 88. pp. 33-338. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Microstructural Modifications Through Compositional Alterations and Their Influence on the Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Scripta Materiallia, 27. pp. 323-328. ISSN 1359-6452

B K , Prasad and J P , Pandey (1997) Dry Sliding Wear Behaviour of a Zinc-Based Alloy Against Different Counterface Materials. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Factors Controlling the Abrasive Wear Response of a Zinc-Based Alloy Silicon Carbide Particle Composite. Composites Part A: Applied Science and Manufacturing, 28. pp. 301-308. ISSN 1359-835x

B K , Prasad (1997) Microstructural Features Controlling the Sliding Wear Response of Some Bearing Alloys. Zeitschrift Fur Metallkunde, 88. pp. 774-780. ISSN 1862-5282

B K , Prasad (1997) Dry Sliding Wear Behaviour of Zinc-Based Alloy: Influence of Heat Treatment and Sliding Speed and Pressure. Materials Science and Technology, 13. pp. 928-936. ISSN 0267-0836

B K , Prasad and Dr., A K Jha and DasGupta, R and S , Das and Dr., K Venkateswaralu (1997) Influence of the SiC Reinforcement on the Abrasive Wear Response of an Al-Cu Alloy Under the Conditions of Varying Abrasive Size and Applied Load. Journal of Materials Science Letters, 16. pp. 1113-1115. ISSN 0261-8028

B K , Prasad (1997) Mechanical Properties and Sliding Wear Characteristics of Zinc-Based Alloys: Effects of Partially Substituting Copper by Silicon. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

Dr., Navin Chandra and S S, Amritphale (1997) Thermal Transformations of Pyrophyllite Mineral : Effect of a Complex Activator of Sintering. Silicates Industriels, 62. pp. 205-209. ISSN 0037-5225

D.P., Patil and K.U., Bhaskar and M.R., Jakhu and T.C., Rao (1997) Removal of graphite from lead rougher concentrate using water-only cyclones. Int. J. Mineral processing., 49. pp. 87-96.

Sorna, Gowri and M., Saxena (1997) Protection of bamboo surfaces by CNSL based coatings. Indian journal of chemical technology , 4. pp. 145-149. ISSN 0971-457X

A., Chauhan , and Kiran, Singh (1997) Copper uptake by Bacillus subtilis f from fly ash. Energy Envionment Monitor. pp. 23-27. ISSN FORESTS GOVERNMENT OF INDIA

Mohini , Saxena and Asokan, Pappu and S, srimanth and Arpana, Chauhan and Sangeeta , Mandal (1997) Utilisation of flyash for wasteland into agriculturally productive land. Eco technology for pollution control and environment , 20. pp. 311-322.

I. B., Singh and G., Venkatachari (1997) Effect of Nacl addition on the voltage noise characteristics during oxidation of iron in NaNo. Indian J. Chem. Techn., 4. pp. 163-166.

D.P., Patil and J R G, Andrews and P H T, Unlheer (1997) A lumped discrete population balance model for shear flocculation model development. International Journal of Mineral Processing, 50. pp. 289-306.

B K , Prasad and DasGupta, R and Dr., O. P. Modi and S , Das and A K , Jha and Dr., A H Yegneshwaran (1997) Surface engineering A potential technique for improving the performance of mining and agricultural implements . J. Surface Engineering., 13. pp. 123-127.

B K , Prasad (1997) Effects of silicon addition and test parameters on the sliding wear characteristics of zinc-based alloy containing 37.5% aluminium. Materials transactions - JIM, 38. pp. 701-706. ISSN 0916-1821

R., Dasgupta and B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (1997) Wear characteristics of a hardfaced steel in slurry. J. Wear, 209. pp. 255-262.

S , Das (1997) The influence of matrix microstructure and particle reinforcement on the two-body abrasive wear of an Al-Si alloy. Journal of Materials Science Letters, 16. pp. 1757-1760. ISSN 0261-8028

B K , Prasad and A K , Patwardhan and Dr., A H Yegneshwaran (1997) Tensile properties of some Zn 27.5 Wt.% Al alloys as influenced by heat treatment and test conditions. JOURNAL OF MATER IAL S SC IENCE LETTERS, 16. pp. 1890-1893. ISSN 0261-8028

DasGupta, R (1997) Property improvement in Al–Si alloys through rapid solidification processing. Journal of Materials Processing Technology, 72. pp. 380-384.

B., Chakradhar (1997) Role of public participation in environmentally compatiable development. . J. Encology & Energy Conv., 12. pp. 1-5.

B , Chandrakar (1997) Biofilm loss rate in an anaerobic packed bed bioreactor. International Journal of Environmental Studies, 50. pp. 103-109.

B., Chakradhar (1997) Hydrodynamic considerations of anaerobic packed bed bioreactor for waste water treatment. Journal Environment Protection., 14. pp. 265-269.

T.C., Rao (1997) their processing and problems Ironmaking Resources and Reserves Estimation. Australasian Institute of Mining and Metallurgy , Carlton. pp. 17-22.

C. B., Raju and S., Verma (1997) SiC whiskers from rice hulls : formation, purification and characteisation. Br. Cream. Transactions. , 96. pp. 112-115.

I. B., Singh and Manish, Mudgal and Alka , Mishra and Divya , Dawar and B., Chakradhar (1997) Investigation of leachability characteristics of metal contaminats from plating and galvanizing solid waste by TCLP. Ind. J. Chem. Tech. , 4. pp. 298-302.

I. B., Singh (1997) accelerated hot corrosion of nickel in alkali sulphate melt. Ind. J. Chem. Tech.. pp. 3-7.

Dr., O. P. Modi and B K , Prasad and S , Das and A K , Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Microsture and mechanical and sliding wear properties of Zn-based alloys – Effects of swaging and Al-content Proc of Internationl Conference on Recent Advance in Metallurgical. Processes. New Age International Publishers. pp. 1255-1261.

Swati , Munot and B, Tirupati and Raghuvanshi, Ram and R.N., Yadav and E., Peters and M V R L, Murthy (1997) Artificial groundwater recharge in Amzhera village Proceedings of International Conference on Management of Drinking Water Resources at Central Leather Research Institute. Central Leather Research Institute .

Swati , Munot and B, Tirupati and M V R L , Murthy and R.N., Yadav and R., Ram (1997) Indentification of recharge transistion and discharge zones through the interpretation of remote sensing data. ICORG. pp. 433-439.

Mohini , Saxena and Arati, Roy and H.C., Samkushal (1997) Medicinal importance of Hibiscus Rosa Sinensis. Chemistry and Biology of Herbal Medicines . pp. 83-88.

S , Das and A K , Jha and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1997) “Aluminium alloy hard particle composites : Potential wear resistant materials”. Proc International conference on Industrial Tribology . pp. 3-16.

Mohini , Saxena and Asokan, Pappu and Alka , Mishram and S, srimanth and Arpana, Chauhan and C.R., Mishra and M.M., Seth (1997) Mobilisation of physic-chemical characteristics of wasteland soil using NALCO coal ash,. Proc. International Conference of Flyash Disposal & Utilisation . pp. 1-12.

Ahirwar, R. S. (1997) Progress Report 1997-98. Annual report.

DasGupta, R and B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1997) Slurry Erosive Wear of Hardfaced Steel: Effect of Experimental Parameters. Wear. ISSN 0043-1648

B K , Prasad and A H , Yegneshwaran and A K, Patwardhan (1996) Influence of Heat Treatment Parameters on the Microstructure and Properties of Some Zinc-Based Alloys. Journal of Materials Science, 31. pp. 6317-6324. ISSN 0022-2461

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Microstructure-Property Characterization of Some Zinc-Based Alloys: Effects of Heat Treatment Parameters. Zeitschrift Fur Metallkunde,, 87.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Dry Sliding Wear Characteristics of Some Zinc-Aluminium Alloys: A Comparative Study with a Bearing Bronze at a Slow Speed. Wear, 199. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Characterization of the Wear Response of a Modified Zinc-Based Alloy vis-a-vis a Conventional Zinc-Based Alloy and a Bearing Bronze at a High Sliding Speed. Metallurgical and Materials Transactions , 27A. pp. 3513-3525. ISSN 1073-5623

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Factors Controlling the Dry Sliding Wear Behaviour of a Leaded-Tin Bronze. Materials Science and Technology. pp. 427-435. ISSN 0267-0836

B K , Prasad and Dr., A H Yegneshwaran and Dr., O. P. Modi and Dr., K Venkat (1996) Influence of the Size and Morphology of Silicon Particles on the Physical, Mechanical and Wear Properties of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 15. pp. 1773-1776. ISSN 0261-8028

S.R., Karade and Mohini , Saxena (1996) Environment aspects in Building designing and site selection. J. Indian Archi. & Build. pp. 75-78.

A K , Jha and S , Das and Dr., O. P. Modi and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1996) Development of materials for shovel teeth for mining industries. J. Mine Tech, 17. pp. 78-82.

Nikkam, Suresh and M., VANANGAMUDI and T.C., Rao (1996) A performance model for water-only gravity separators treating coal. J Fuel.

D P , Patil and J P, Barnwal and T.C., Rao (1996) Column flotation of siliceous rock phosphate. MINERALS AND METALLURGICAL PROCESSING;. pp. 147-150. ISSN 0747-9182

B., GOVINDARAJAN and T.C., Rao (1996) Development of a selection criterion for process parameters in batch coal flotation. J Minerals and Metallurgical Processing.

MVRL , Murthy and S K , Sanghi and R.N., Yadav and I V , Suresh and A, Wanganeo (1996) impact of storm water run-off on efficiency of the effluent treatment plant a case-study. a case study, 31. pp. 811-824.

I V , Suresh and M V R L, Murthy and C, Padmakar and A, Wanganeo and R G, Sujatha (1996) Fluoride concern Bhopal water resources. J. Ecol. Env. & Cons., 2. pp. 11-15.

I. B., Singh and G., Venkatachari (1996) Anodic behaviour of Inconel 600, 601 in sulphate solutions. J Bull Electrochemistry, 12. pp. 83-85.

R.K., Morchale and M., Saxena and S.R., Karade (1996) Redmud polymer composite-A subsititute of wood. Ibid. pp. 417-428.

R S, Ahirwar (1996) Manufacture of Redmud cement using industrial waste redmud. Udymita Vikas..

Sangeeta , Mandal and Asokan, Pappu and Arpana, Chauhan and Mohini , Saxena (1996) Utilisation ash in process indurtries. Coal Ash Institute of India. pp. 28-29.

Ahirwar, R.S. (1996) progress report 1996-97. annual report.

B K , Prasad (1996) Influence of Heat Treatment on the Physical, Mechanical and Tribological Properties of a Zinc-Based Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

Dr., Navin Chandra and S S, Amritphale (1995) Low Temperature sintering pyrophyllite compositions for wall tiles. Journal of the Canadian Ceramic Society, 64. pp. 241-244. ISSN 0068-8444

Dr., Navin Chandra and S S, Amritphale and S.P. , Pathak (1995) Preparation of active manganese dioxide using micro-wave heating. Transaction fo the SAEST, 30. pp. 33-38. ISSN 0036-0678

Dr., Navin Chandra and H., gomathi and G., Prabhakar Rao (1995) Glassy carbon - Surface characterization by electrochemical and spectral method. Bulletin of Electrochemistry, 11. pp. 248-252. ISSN 0256-1654

Dr., Navin Chandra and S., Vincent and G., Subramanain and G., Prabhakar Rao and S., Birla Sekaran and K. I., Vasu and Y., , Mahadeva Iyer (1995) An Inexpensive electrochemical monitor for mercury. Bulletin of Electrochemistry, 11. pp. 305-308. ISSN 0256-1654

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1995) `Beneficiation Studies on Low Grade Cherty – calcareous Rock Phosphate'. Minerals and Metallurgical Processing, 2. pp. 92-96. ISSN 2163-1573

B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and Dr., A H Yegneshwaran (1995) Abrasive Wear Characteristics of a Zn - 37.2 Al - 2.5 Cu - 0.2 Mg Alloy Dispersed with Silicon Carbide Particles. Materials Transactions of Japan Institute of Metals. pp. 1048-1057. ISSN 1345--9678

A K , Jha and B K , Prasad and S , Das and Dr., A H Yegneshwaran and Dr., O. P. Modi (1995) Microstructure and wear of Al-alloy matrix composites. Proc. Conf. Industrial Tribology...

C. N., Pathak and A.K., Gupta (1995) Foundary slags for production of glass-ceremics”,Transaction the Institute of Indian Foundrymen. Institute of Indian Foundrymen.. pp. 316-317.

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1995) `Beneficiation Studies on Low Grade Cherty – calcareous Rock Phosphate. Minerals and Metallurgical Processing,, 2. pp. 92-96. ISSN 2163-1573

T.C., Rao and A. K., Majumder and B., Govindarajan and T., Sharma and H.S., Ray (1995) An empirical model for chloridising-roasting of potassium in glauconitic sandstone. International Journal of Mineral Processing, 43. pp. 81-89.

P, Prabha and C. B., Raju and A S, Rao (1995) Characteristics of fly ash to asses its suitability for Agriculture. Clay Research, 13. pp. 30-37.

Kiran , Singh and Arpana, Chauhan (1995) Uptake of cadmium by bacillus subtills f. Cientifica, 38. pp. 25-28.

C., Rao and B., Govindarajan (1995) Modelling studies on fine coal treatment processes”, Monograph, Minral Resources – Characterisation and Beneficiation. Characterisation and Beneficiation. pp. 250-263.

Sulbha, Amlathe and C,, Padmakar and B, Tirupati and M V R L, Murthy and A.K., Mishra and R.N., Yadav (1995) Groundwater quality evalution of shallow aquifer-Tawa canal command area. j. Bhujal News, 10. pp. 19-22.

K., Rao and C,, Padmakar and L.S., Rao (1995) Petrographic liberation studies of glauconitic sanstone of Majhgawan area. The Indian Mining & Engg. Journal., 34. pp. 10-14.

K.K., Rao and C,, Padmakar and L.S., Rao (1995) Petrographic liberation studies of glauconitic sandstone of Majhgawan area,Satna Dist. M.P. The Indian Mining & Engineering Journal, 34. pp. 10-14.

B, Kujur and J., Konar and S S, Amritphale (1995) Determination of tc tal phosphorous in rock phosphate minerals by modified faster titrimetric method. j. Silicates industrials. pp. 59-62.

N. , Suresh and T.C., Rao and D. D., Haldar (1995) Effects of some process variables of conditioning on the coal.oil aggiomeration of middlings. IE (I) Journal-MN , 76. pp. 9-14.

B, Kujur and Jayant, Konar and S S, Amritphale (1995) “Determine of tc tal phosphorous in rock phosphate minerals by modified faster titrimetric method”. J Silicated Industries. pp. 59-62.

Sulbha, Amlathe and C,, Padmakar and B, Tirupati and M V R L, Murthy and A.K., Mishra and R.N., Yadav (1995) Groundwater quality evaluation of shallow aquifer-Tawa canal command area. J Bhujal News.. pp. 19-22.

Ahirwar, R.S. (1995) progress report 1995-96. annual report.

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha (1994) he Effects of Alumina Fibres on the Sliding Wear of a Cast Aluminium Alloy. Tribology International. Tribology International, 27. pp. 153-158. ISSN 0301-679X

Dr., Navin Chandra and Jayant, Konar and S S, Amritphale and V.S., Muneshwar (1994) Effect of aluminium addition in white cast iron on corrosion rate in Aqueous solution. journal Electrochem Soc..

Dr., Navin Chandra and Jayant, Konar and S S, Amritphale and V S , Muneswar (1994) effect of aluminium addition in white cast iron on corrosion rate in aqueous solutions. Journal of the Electrochemistry Society., 43. pp. 175-178. ISSN 0013-4651

B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1994) Abrasive Wear Behaviour of an AISI 5132 Steel Under Low-Stresses. Materials Transactions of Japan Institute of Metals, 35. ISSN 1345--9678

S S, Amritphale and J., Konar and B., Kujur (1994) Determination of total phosphorus in rock phosphate minerals by a modified faster titrimetric method. J. Sillicate Industries. pp. 1-2.

Arati, Roy and Raj Kishore, Katiyar and R.N., Yadav (1994) The effect of internal pressure on a penny-shaped crack at the interface of two bounded dissimilar micropolar elastic half-spaces. International Journal of Fracture, 65. pp. 19-30. ISSN 0376-9429

T.C., Rao and B., Govindarajan (1994) Modelling and performance studies on Vorsyl separator. Materials and Process, 6. pp. 31-38.

C. B., Raju and S., Verma and T.C., Rao (1994) Synthesis of in-situ SiAION whisker reinforced ceramic composite – A new process. A new process. British Ceramic Soc. Proc., 53.

T.C., Rao and B., Govindarajan (1994) Indexing the washability characteristics of coal. International Journal of Mineral Processing, 42. pp. 285-293.

T.C., Rao and B., Govindarajan (1994) A simple equation for sink-float data. Minerals Engineering, 7. pp. 1441-1446.

DasGupta, R and S.K., Bose (1994) Variation in magnetic properties of hard ferrites prepared from blur dust of Bailadila, M.P. with the initial raw material composition. Indian journal of pure and applied and physics, 32. pp. 96-97.

B K , Prasad (1994) Structure-Property Related Changes in a Hypoeutectic Aluminium-Silicon Alloy Induced by Solutionizing. Materials Transactions of Japan Institute of Metals, 35. pp. 873-878. ISSN 1345--9678

Ahirwar, R. S. (1994) Progress Report 1994-95. annual report.

B K , Prasad (1993) Structure-Property Relations in a Hypereutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Journal of Materials Science, 28. pp. 100-104. ISSN 0022-2461

B K , Prasad and S , Das (1993) Tribological Behaviour of Aluminium Alloy Composites: A Comparative Study With a Copper Base Alloy. Wear, 162. pp. 64-74. ISSN 0043-1648

Dr., Navin Chandra and G., Subramanain and G., Prabhakar Rao (1993) Response of chloride ion selective electrode in partially aqueous media. Transaction fo the SAEST, 28. pp. 173-177. ISSN 0036-0678

B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and A H , Yegneshwaran (1993) Three-Body Abrasive Wear Behaviour of 0.98% C Steel. Wear. ISSN 0043-1648

B K , Prasad and T K, Dan and P K , Rohtagi (1993) Characterization and Microstructural Modifications of Pressure Die Cast Eutectic Aluminium-Silicon Alloy-Graphite Composite. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

DasGupta, R and S.K., Bose and A, Roy (1993) Debye Charactristic Tempeature for Rapidly Solidified Al-Mn Alloys with a Software Package. Journal of Materials Science Letters, 47. pp. 20-22. ISSN 1047-4838

M., Saxena and A K , Jha and G. S., Upadhya (1993) Corrosion behaviour of sintered 6061 aluminium alloy-graphite particle composites. Journal of Materials Science Letters, 28. pp. 4053-4058. ISSN 0022-2461

A K , Jha and G. S., Upadhya and M., Saxena (1993) Corrosion behaviour of sintered 6061 aluminium alloy-grahite particle composites. Journal of Materials Science, 28. pp. 4053-4058. ISSN 0022-2461

A. K., Majumder and T., Sharma and T.C., Rao (1993) Extraction of potassium from Glauconitic Sandstone by the Roast-Leach Route. International Journal of Mineral Processing, 38. pp. 111-123.

B.R., Rao and L.S., Rao and A. K., Majumder and T.C., Rao (1993) “Fluoride Aided Leaching of Glauconitic Sandstone for a Fluid Fertilizer”, Minerals Engineering. Minerals Engineering. Minerals Engineering,, 6. pp. 405-413.

B.R., Rao and L.S., Rao and A. K., Majumder and T.C., Rao (1993) Fluoride aided potassium extraction from glauconitic sandstone for liquid fertilizer. Minerals Engineering, 4. pp. 405-413.

Arati, Roy and R.N., Yadav and Raj Kishore, Katiyar (1993) A problem of thermal stresses half spaced containing a penny shaped crack at the interface. journal of Material Science Technology.. pp. 7-24.

L.S., Rao and B.R., Rao and B., Govindarajan and T.C., Rao (1993) A model for leaching glauconitic sand-stone using reduced time Plot concept. Minerals and Metallurgical Processing,, 10. pp. 119-123.

B K , Prasad and Dr., O. P. Modi and Dr., Mohini Sexena and Dr., A K Jha (1993) Erosion-Corrosion Characteristics of an Aluminium Alloy - Alumina Fibre Composite. Wear, 169. pp. 119-124. ISSN 0043-1648

Ahirwar, R. S. (1993) Progress report 1993-94. anuual report.

B K , Prasad and Dr, S V Prasad and Dr, A A Das (1992) Abrasion-Induced Microstructural Changes and Material Removal Mechanisms in Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science, 27. pp. 4489-4494. ISSN 0022-2461

B K , Prasad and Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., M. L. Vaidya (1992) Dry Sliding Wear Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Materials Science and Engineering, 15A. pp. 235-245. ISSN 0921-5093

S S, Amritphale and Navin, Chandra and Rajendra , Kumar (1992) Sintering behaviour of pyrophyllite mineral: effect of some alkali and alkaline-earth metal carbonates. Journal of Materials Science, 27. pp. 4702-4809. ISSN 0022-2461

Dr., Navin Chandra and B, Kujur and Manoj, Ban and jayant, Konar (1992) A simple method for estimation of calcium in Minerrals by wet chemical analysis. Silicates Industriels. pp. 68-69. ISSN 0037-5225.

B K , Prasad and Dr., O. P. Modi and Mohini , Saxena and A H , Yegneshwaran and M. L, Vaidya (1992) Corrosion Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science. 3897-3902.. ISSN 0022-2461

B K , Prasad and T K, Dan and P K , Rohtagi (1992) Characterization of and Structure-Property Relations in a Pressure Die Cast Hypoeutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Zeitschrift Fur Metallkunde. ISSN 1862-5282

Dr., Navin Chandra and Dr., S S Amrithphale and Dr., Rajendra Kumar (1992) Sintering Behaviour of Pyroprylite Mineral: Effect of some Alkali and Alkali and Alkaline Extre Metal Carbonates. Journal of Materials Science Letters, 27. pp. 4797-4804. ISSN 0022-2461

B K , Prasad and Dr., Mohini Sexena and Dr., T. K. Dan (1992) Evaluation of Some Engineering Properties of an Enamel Coated Steel. Plating and Surface Finishing, 79. pp. 57-61. ISSN 0360-3164

B K , Prasad and Dr., Mohini Sexena and Dr., T. K. Dan (1992) Corrosion Behaviour of 2014-Graphite Composite in Various Environments. Journal of Materials Science, 27. pp. 4805-4812. ISSN 0022-2461

Dr., O. P. Modi and Dr., A H Yegneshwaran and P K , Rohtagi and A. K., Singh (1992) High-temperature strength of an aluminium alloy dispersed with graphite particles. Journal of Materials Science Letters, 11. pp. 1466-1468. ISSN 0261-8028

B K , Prasad and Dr., S V Prasad (1992) Microstructural Changes During Low-Stress Abrasion of a Plain Carbon (0.5 % C) Steel. Wear, 151. pp. 1-12. ISSN 0043-1648

Ahirwar, R. S. (1992) Progress Report 1992-93. Anuual Report.

B K , Prasad (1991) The Significance of Matrix Microstructure on the Solid Lubrication Characteristics of Graphite in Aluminium Alloys. Materials Science and Engineering A,, 144A. ISSN 0921-5093

B K , Prasad and T K, Dan (1991) Some Observations of the Effects of Overheating in a Hypoeutectic Al-Si Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

Dr., A K Jha and Dr, S V Prasad and Dr., G. S. Upadhya (1991) Preparation and Properties of 6061 Aluminium Alloy Based P/M Particle Composites. Solid State Phenomena. pp. 283-288.

B K , Prasad and Dr, S V Prasad and Dr, A A Das (1991) Mechanisms of Material Removal and Subsurface Workhardening During Low Stress Abrasion of a Squeeze Cast Aluminium Alloy-alumina Fibre Composite. Materials Science and Engineering: A,, 156. pp. 205-209.

Dr., O. P. Modi and Dr., A K Singh and Dr., A H Yegneshwaran (1991) Temp. And strain rate effects on tensile behaviour of Al-Mg-2.5 gr. Particulate composite. ibid.. pp. 433-443.

R. S., Solanki and K., Basu and A. K., Singh (1991) Quality and Productivily improvement in ETP Copper Welding – An Experimental Study. BHEL Journal, 12. pp. 40-50.

B., GOVINDARAJAN and T.C., Rao and M., VANANGAMUDI (1991) An Empirical Model for Batch Coal Flotation. Coal Preparation. pp. 3-4. ISSN DOI:10.1080/07349349108960564

Dr., O. P. Modi and B K , Prasad and Dr., A H Yegneshwaran and Mohini , Saxena (1991) Effects of SIC dispersoid on the corrosion behaviour of squeeze Al-alloy-SiC composites. ibid.. pp. 915-920.

Ahirwar, R. S. (1991) Progress Report 1991. annual report.

B K , Prasad (1991) Microstructural Modifications and Improvement in Properties of a Hypoeutectic Al-Si alloy Dispersed with Graphite Particles. Journal of Materials Science Letters.

Dr., Navin Chandra and B K , Saxena and Sangeeta , Dhar (1990) Corrosion of Aluminium in Aqueous Solutions of Different pH. Journal of the Electrochemistry Society., 17. pp. 160-164. ISSN 0013-466X

Dr., Navin Chandra and B K , Saxena and Sangeeta , Dhar (1990) corrosion of super putiry aluminium in deaerated mineral acids. Bulletin of Electrochemistry. pp. 487-491. ISSN 0256-1654

Dr., Navin Chandra and H., gomathi and L. R., Sharma (1990) Pretreatment of glassy carbon electrode leading to surface modification in ferro/ferricyanide and potassium chloride medium. Bulletin of Electrochemistry, 7. pp. 477-479. ISSN 0256-1654

Dr., O. P. Modi and M N , Munagole and Dr., K P Singh (1990) Potentiodynamic studies of modified 9Cr-1Mo ferritic steel in sulphuric acid and seawate. Corrosion Science, 30. pp. 941-947.

Dr., A K Jha and Dr, S V Prasad and Dr., G. S. Upadhya (1990) Activated Sintered 6061 Aluminium Alloy Particulate Composites Containing Coated Graphite. Controlled Interphases in Composite Materials. pp. 829-840.

Dr., A K Jha and Dr., S. V. Prasad and Dr., G. S. Upadhya (1990) MECHANICAL BEHAVIOUR OF SINTERED 6061 ALUMINIUM ALLOY AND ITS COMPOSITES CONTAINING SOFT OR HARD PARTICLES. Journal of Materials Science. . ISSN 0022-2461

Dr., A K Jha and Dr, S V Prasad and Dr., G. S. Upadhya (1990) Activated sintered 6061 Aluminium alloy Particulate Composite Containing Coated Graphite in controlled Interphases in Composite Materials. Controlled Interphases in Composite Materials..

B K , Prasad and Dr., T. K. Dan (1990) Microstructure - and Property - Related Changes in a Pressure Die Cast Graphitic Al-Si Alloy Induced by Heat Treatment. Journal of Materials Science Letters, 9. pp. 951-952. ISSN 0261-8028

B K , Prasad and Dr., T. K. Dan (1990) Effect of Solutionzing a Graphitic Hypereutectic Al-Si Alloy At various Temperatures and time. Journal of Materials Science. ISSN 1573-4803

Dr., A A Das and Dr., S V Prasad and B K , Prasad (1990) MATERIAL REMOVAL MECHANISMS AND MICROSTRUCTURAL CHANGES DURING ABRASION OF SQUEEZE CAST ALUMINIUM ALLOY-MATRIX COMPOSITES. Journal of Materials Science.

DasGupta, R and Dr., S. K. Bose and Dr., R Kumar (1989) Tribological Behaviour of Rapidly Solidified and Processed Al-Si Base Alloys. Key Engineering Material. pp. 277-286.

Dr., A K Jha and Dr., S. V. Prasad and Dr., G. S. Upadhya (1989) Sintered 6061 Al-alloy solid Lubricant Particle Composites: sliding wear & Mechanisms of Lubrication. Wear, 183. ISSN 0043-1648

Dr., A K Jha and Dr., S. V. Prasad and Dr., G. S. Upadhya (1989) Sintering Behaviour & Properties of 6061 Al-Alloy Titanium carbide Particle composite. Science of Sintering, 21. ISSN 0043-1648

Dr., A K Jha and Dr., S. V. Prasad and Dr., G. S. Upadhya (1989) Sintered 6061 aluminium alloy—solid lubricant particle composites: sliding wear and mechanisms of lubrication. Wear. ISSN 0043-1648

T.C., Rao and B., GOVINDARAJAN and M., VANANGAMUDI (1989) A kinetic model for batch coal flotation. Minerals Engineering,, 2. pp. 403-414.

Dr., S K Bose and Dr., R K Ganguly and Dr., A N Sinha and Dr., P K De and Dr., N K Das (1989) Property Improvements in RSP Al –Mn Alloys. Materials and Manufacturing Processes..

Dr., S P Narayan and Dr., V S Muneswar and Dr., A H Yegneshwaran (1989) Spheroidisation Studies on High Strength Low Alloy Steel. Tool and Alloy Steel, 23.

A K , Jha and S V , Prasad and G. S., Upadhya (1988) Microstructure of rapidly solidified Al-Si graphite composite. Powder Metallurgy International,, 20. pp. 189-20.

S V , Prasad and A K , Jha and G. S., Upadhya (1988) Dry sliding wear of sintered 6061 aluminium alloy— graphite particle composites. Tribology International, 22. pp. 321-327.

Dr., Navin Chandra and Allen j, Bard and Jonathan K. , Leland (1987) Semiconductor Electrodes LXI. Photoelectrochemistry of Formula in Aqueous Solutions. Journal of the Electrochemistry Society., 134. pp. 76-80. ISSN 0013-4651

B K , Prasad and T K, Dan and P K , Rohtagi (1987) Pressure-induced improvement in interfacial bonding between graphite and the aluminium matrix in graphitic-aluminium particle composites. JOURNAL OF MATERIAL SCIENCE LETTERS.

Dr., Navin Chandra and S., Verma and A. C., Khazanchi (1987) Acetylation of sunhemp fibre. Indian journal of textile research, 12.

A., Gupta and M., Patel (1987) XRD studies or some alumina-sillicate minerals for composite and ceramic products. Indian ceramics, , 29.

S , Das and P K , Rohtagi and Dr., A H Yegneshwaran (1987) Characterisation of rapidly solidified Al-Si alloy. Journal of Materials Science, 2. pp. 3173-3177. ISSN 0022-2461

Dr., O. P. Modi and P K , Rohtagi and Mohini, Saxena and Dr., A H Yegneshwaran and , (1987) Corrosion characteristics of cast aluminum alloy—3 wt% graphite particulate composites in different environments. Corrosion Science, 27. pp. 249-256.

Dr., O. P. Modi and Dr., A H Yegneshwaran and R., Asthana and P K , Rohtagi (1987) Thermomechanical processing of Al based particulate composites. Journal of Materials Science Letters, 23. pp. 83-92. ISSN 0022-2461

P, Prasann and M., Patel (1987) SEM studies on silica from plain materials, X-ray spectometro. X-Ray Spectrometry. pp. 57-60.

A K , Jha and P K , Rohtagi and T K, Dan and R., Asthana (1987) Effect of dispersed graphite on the freezing rate of gravity die cast LM 13 alloy-3 wt.% graphite particle composite. Journal of Materials Science Letters,, 6. pp. 225-228. ISSN 0261-8028

B, Kujur and A.K., Roy and C. B., Raju and M., Patel (1987) Separation of ceramic particles from aluminium metal-ceramic composites. Journal of Materials Science, 22. pp. 962-964. ISSN 0022-2461

Ahirwar, R. S. (1987) Progress report 1987-88. Anuual Report.

B K , Prasad and Dr, S P Gupta (1986) The Effect of Thermal Cycling on the Kinetics of Cellular Phase Transformation in a Cu-In Alloy. Materials Science and Engineering. Materials Science and Engineering, 77. pp. 181-190. ISSN 0921-5093

S S, Amritphale and M., Patel and M., Maheshwari (1986) New Idustrial uses of pyrophyllite mineral. Journal science indestrial research. pp. 66-72.

Dr., A K Jha and Dr., G. S. Upadhya and Dr., P K Rohatgi (1986) Properties of composites of 2014 aluminium alloy with Ni-Mo-based metallic glass particles. Journal of Materials Science Letters, 21. pp. 1502-1508. ISSN 0022-2461

Dr., A K Gupta and Dr., T. K. Dan and Dr., P K Rohatgi (1986) Aluminium alloy-silica sand composites: preparation and properties. Journal of Materials Science, 21. pp. 3413-3419. ISSN 0022-2461

Dr., T. K. Dan and Dr., S. Raman (1986) Physico-chemical analysis of a raw brick clays of Bhopal. Indian Ceramics.

Dr., T. K. Dan (1986) Studies on the effect of MgO on hydraulic properties of slag. Indian ceramic..

Dr., T. K. Dan (1986) Effect of salts on setting time of Portland cement. Indian ceramic.

S V , Prasad and P K , Rohtagi and A R, Sanadi (1986) Sunhemp fibre reinforced polyester. Journal of Materials Science,, 21. pp. 4299-4304. ISSN 0022-2461

C. S. , Narendranath and A R, Sanadi (1986) Interfaces in metal wire metal matrix composites prepared by liquid metallurgy techniques. Journal of Materials Science Letters,, 5. pp. 917-919. ISSN 0261-8028

P K , Rohtagi and Dr., A H Yegneshwaran and R, kumar (1986) Surface finishing of aluminium alloys containing graphite and zircon particles. Plating and Surface Finishing,, 73. pp. 112-115. ISSN 0360-3164

Dr., A H Yegneshwaran and P K , Rohtagi and C. S. , Narendranath (1986) Observations of graphite structure under optical and scanning electron microscopes. Journal of Materials Science Letters, 5. pp. 592-594. ISSN 0261-8028

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behaviour of rapidly solidified aluminium-silicon ribbon-polyester composites. Journal of Materials Science Letters. ISSN 0261-8028

A K , Jha and G. S., Upadhya and P K , Rohtagi (1986) Properties of composites of 2014 aluminium alloy with Ni-Mo based metallic glass paricles. Journal of Materials Science, 21. pp. 1502-1508. ISSN 0022-2461

S V , Prasad and P K , Rohtagi and T.H. , Kosel (1986) Mechanism of material removal during low stress abrasion of Al alloy Zircon particle composities. Materials Science and Engineering, 80. ISSN 0921-5093

A K , Jha and T K, Dan and S V , Prasad and P K , Rohtagi (1986) Al alloy-solid lubricant talc particle composites. Journal of Materials Science, 21. pp. 3681-3685. ISSN 0022-2461

A. R. , Sanadi and S V , Prasad and P K , Rohtagi (1986) SEM observations on the origin of toughness of natural fibres polymer composites. Journal of Materials Science Letters,, 5. pp. 395-396. ISSN 0261-8028

C. B., Raju (1986) Development of antiwear and chemically durable tiles from themal wastes. Indian Ceram Soci., 45.

Dr., A H Yegneshwaran and Dr., Mohini Sexena and Dr., P K Rohatgi and Dr., Raj Kumar (1986) Surface finishing of Aluminium alloy particulate composites. Plating and Surface Finishing. ISSN 0360-3164

Dr., A R Sanadi (1986) Interfacial effects in carbon epoxies Part III Toughness with short fibres. Journal of Materials Science, 21. pp. 1642-1646. ISSN 0022-2461

Dr., P K Rohatgi and Dr., S. V. Prasad and Dr., A R Sanadi (1986) SEM observations on the origins of toughness of natural fibre—polyester composites. Journal of Materials Science Letters, 5. pp. 395-396. ISSN 0261-8028

Dr., P K Rohatgi and Dr., C S Narendranath and Dr., A H Yegneshwaran (1986) observation of graphite structure under optical and scanning electron miocroscopes. Journal of Materials Science, 5. pp. 592-594. ISSN 0022-2461

Dr., S. V. Prasad and Dr., C S Narendranath and Dr., P K Rohatgi (1986) Tribological properties of Al alloy matrix particulate composites. Journal of Material..

Dr., R.C. Srivastava and Dr., R K Sharma and Dr., C.V.S. Subrahmanyam and Dr., S.B. Bhise (1986) Liquid membrane phenomena in antiarrhythmic action. International Journal of Pharmaceutics, 28. pp. 145-149.

Navin, Chand (1986) Adhesion of sisal fibre in polyester. POLYMER COMPOSITES. ISSN 0272-8397

Navin, Chand and P K , Rohtagi (1986) Structure and properties of Hibiscus pandureformis. A new type fibre. Proc. Third international symposium on Development in Fibre Reinforced Cement and Concrete. International Journal of Cement Composites and Lightweight Concrete.

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behavior of Al RSP-polyester composite. J. Materials Science .

Dr., Navin Chandra and G., Subramanain and G., Prabhakar Rao (1985) electrochemical phase formation of calomel under linear potential sweep conditions. Bulletin of Electrochemistry. pp. 83-86. ISSN 0256-1654

Dr., Navin Chandra and Allen J, Bard and Bob, L. Wheeler (1985) Semiconductor electrodes. 59. Photocurrent efficiencies at p-indium phosphide electrodes in aqueous solutions. The Journal of Physical chemistry, 89. pp. 5037-5040. ISSN 0022-3654

Dr., O. P. Modi and Dr., M N Munagole and Dr., R P Singh and Dr., K P Singh (1985) CORROSION OF 2.25CR-1MO FERRITIC STEEL IN SULPHURIC ACID AND SEA WATER. British Corrosion Journal.

Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Thermechanical processing of cast particulate composites. Journal of Materials Science Letters. ISSN 0261-8028

Dr., T. K. Dan and Dr., M Chatterji (1985) Activation of Indian blast furnace slag to lime and limes sgypsum mixed activation in solution phase. Indian Journal of Technology, 23.

Dr., T. K. Dan and Dr., A K Jha and Dr., P K Rohatgi and Dr., S. V. Prasad (1985) Aluminium alloy-solid lubricant talc particle composites. Journal of Materials Science Letters, 21. pp. 3681-3685. ISSN 0022-2461

Dr., S.B Bhise and Dr., A Tandon and Dr., R K Sharma and Dr., R.C Srivastava (1985) ransport through liquid membrane bilayers generated by lecithin, cholesterol, and lecithin-cholesterol mixtures—studies in the presence of polyene antibiotics. Journal of Colloid and Interface Science, 108. pp. 249-256. ISSN 0021-9797

Dr., R.C. Srivastava and Dr., A. Tandon and Dr., S. Kurup and Dr., R.K. Sharma (1985) The photoelectric effect in liquid membrane bilayers: studies on chloroplast extract, haemoglobin and protoporphyrin. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry,, 187.

Dr., A R Sanadi and Dr., S. V. Prasad and Dr., O. P. Modi (1985) Identification of unconverted oxide phases in a synthetic clay mineral by scanning electron microscopy and the x-ray microprobe. X-Ray Spectrometry, 14. pp. 20-22.

Dr., A R Sanadi and Dr., M R Piggot (1985) Interfacial effects in carbon-epoxies. Journal of Materials Science, 20. pp. 421-430. ISSN 1573-4803

S , Das and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Microstructures of rapidly solidified Al-Si and Al-Si graphite particle composite. INCAL, 80.

Dr., P K Rohatgi and Dr., M Patel and Dr., C. B Raju (1985) Research and development imperatives in bauxite minerals. Journal Science Industrial Research,, 44.

U T S , Pillai and P K, Rohatgi and R. K , Pandey and K D P , Nigam (1985) MODIFIED RELATIONSHIPS FOR COMPUTING THE TENSILE PROPERTIES OF ALUMINUM ALLOY BASED PARTICULATE COMPOSITES. Materials Science and Engineering A. ISSN 0921-5093

A. R. , Sanadi and S V , Prasad and P K , Rohtagi (1985) Natural fibres and agrowastes as fillers and reinforcement in polymer composites. Journal Science and Research , 44. pp. 437-442.

Dr., M. Patel (1985) Analysis of different phases in cement. Indian Ceramics.

Dr., M. Patel (1985) Beneficiation of montmorillonite fromk betonite. Indian Ceramics.

Ahirwar, R. S. (1985) Progress Report 1985-86. Anuual Report.

Navin, Chand and A.C. , Khazanchi and P K , Rohtagi (1985) Structure and properties of Ipomoea carnea: Its performance in polymer, clay and cement based composites. International Journal of Cement Composites and Lightweight Concrete, 8. pp. 11-20.

Dr., Navin Chandra and G., Subramanain and Prabhakar , Rao (1984) Estimation of chloride in oxidizing media by means of ion-selective electrodes. Talanta, 31. pp. 79-81. ISSN 0039-9140

B.S., Majumdar and A H , Yegneshwaran and P K , Rohtagi and Dr., A H Yegneshwaran (1984) Strength and fracture behaviour of metal/matrix particulate composites. Materials Science and Engineering A, 68. pp. 85-96. ISSN 0921-5093

A K , Jha and G. S., Upadhya and P K , Rohtagi (1984) “2014 Al-alloy Metglass sintered composites” Sintered Metal-Ceramic composites. Materials Science and Engineering A. pp. 259-260. ISSN 0921-5093

P K , Rohtagi and Annie , George and V S., Kelukutty and L. G., Radhika and P. N., Mohandas (1984) Rutile from ilmenite using coconut pith as reductant. Journal of Materials Science, 19. ISSN 0022-2461

Dr., A H Yegneshwaran and B. S., Majumdar and P K , Rohtagi (1984) Strenght and fracture behaviour of metal particulate composites. Materials Science and Engineering, 68. pp. 85-96.

Dr., K Tangri and Dr., A H Yegneshwaran (1984) Deformation behaviour of two phase materials: Cu-Al system. Material Science, 18. pp. 161-168.

Dr., B. P Krishnan and Dr., P K Rohatgi (1984) Modification of Al–Si alloy melts containing graphite particle dispersions. Metal Technology..

Dr., A H Yegneshwaran and Dr., B S Majumder and Dr., P K Rohatgi (1984) Strength and fracture behaviour of metal matrix particulate composites. Material Science and Engineering.

Ahirwar, R. S. (1984) Progress Report 1984-85. Annual Report.

Navin, Chand and S., Sood and P K , Rohtagi and K.G., Stayanarayana (1984) "Resources, structure, properties and uses of natural fibers of Madhya Pradesh". Journal of Scientific and Industrial Research , 43. pp. 489-499.

Navin, Chand (1984) A new relationship of Tg with interchain spacing. Pop. Plastics.

Navin, Chand and K.K., Verma and Mohini , Saxena and A.C., Khazanchi and P K , Rohtagi (1984) Materials science of Plant based materials of Madhya Pradesh for Housing Proceedings of International Conference on Low Cost Housing for developing countries. Roorkee. pp. 191-201.

S.V., Prasad and T.H., Kosal (1984) A study of carbide removal mechanisms during quartz abrasion: II: Effect of abrasive particle shape. Wear, 95. pp. 87-102. ISSN 0043-1648

P.K., Ghosh and S., Ray and P.K. , Rohatgi (1984) Incorporation of Alumina Particles in Aluminium-Magnesium Alloy by Stirring in Melt. Magnesium Alloy by Stirring in Melt, 25. pp. 440-444. ISSN 0021-4434

Dr., Navin Chandra and G., Subramanain and G., Prabhakar Rao (1983) Halide Ion-selective electrodes. Metal Finish, 81. pp. 53-59. ISSN 1073-5623

Dr., Navin Chandra and H., gomathi and G., Subramanain and Prabhakar , Rao (1983) Solid state halide ion -selective electrodes: studies of quaternary ammonium halide soultions and determination of surfactants. Talanta, 30. pp. 861-863. ISSN 0039-9140

Dr., A K Jha and Dr., G. S. Upadhya (1983) Properties of sintered 2014 aluminium alloy composite containing WC. Journal of Materials Science Letters. ISSN 0261-8028

Dr., A K Jha and Dr., G.S. Upadhya (1983) EFFECT OF ATMOSPHERE ON SINTERING OF AGE- HARDENABLE 2014 AL-ALLOY AND ITS COMPOSITES. Light metal age. pp. 42-43.

Dr., B P Krishnan and Dr., N Raman and Dr., K. Narayanaswamy and Dr., P K Rohatgi (1983) Performance of aluminum alloy graphite bearings in a diesel engine. Tribiology International, 16. pp. 239-244.

Dr., K G Satynarayana and Dr., A G Kulkarni and Dr., P K Rohatgi (1983) Retrospect and prospect of natural fibres. Journal of scientific and industrial research., 42. pp. 425-428.

Dr., A G Kulkarni and Dr., P K Rohatgi and Dr., K G Satynarayana (1983) Weibull analysis of strengths of coir fibres. Elsevier, 19. pp. 59-79.

Dr., P K Rohatgi and Dr., A G Kulkarni and Dr., K G Satynarayana (1983) Mechanical properties of banana fiber. Journal of Materials Science, 18. pp. 2290-2296. ISSN 0022-2461

Dr., K G Satynarayana and Dr., A G Kulkarni and Dr., S G K Pillai and Dr., K Sukumaran and Dr., P K Rohatgi (1983) Performance of Banana Fabric-Polyester Resin Composites. Composite structure, 2. pp. 535-538.

Dr., K Taragi and Dr., A H Yegneshwaran and Dr., P Griese (1983) THE EFFECT OF MODERATE TEMPERATURE EFFLUENTS ON SELECTED MATERIALS USED IN AIR-TO-AIR ENERGY RECOVERY EQUIPMENT. Ashare Tranctions.

Dr., A H Yegneshwaran and Dr., K Taragi (1983) strain distribution and load transfer characteristics of a cu-9 wt% Al dual phase structure. Zeitschrift Fur Metallkunde. ISSN 1862-5282

Dr., A H Yegneshwaran and Dr., K Taragi (1983) Investigation of the early stages of deformation of two phase copper-aluminum alloys. Metallurgical Transactions A, 14. pp. 2407-2413. ISSN 0360-2133

Dr., S V Prasad and Dr., C V Pavitharan and Dr., P K Rohatgi (1983) Alkali treatment of coir fibres for coir-polyester composites. Journal of Materials Science, 18. pp. 1443-1453. ISSN 0022-2461

Dr., Mahendra Patel and Dr., Paul Rabette and Dr., Denise Delafosse and Dr., , Maggy Kermarec (1983) Reactivity and structure of nickel-exchanged Prayssac vermiculite. Journal of the Chemical Society Faraday Transactions 1: Physical Chemistry in Condensed Phases, 79.

M.N., Bapat and Navin, Chand and Janu , Sharma (1983) Effect of cenosphere on dielectric properties of low density polyethylene. Result in Physics..

Ahirwar, R. S. (1983) Progress Report 1983-1984. Progress Report 1983-1984.

Navin, Chand (1983) A new relationship of d.c. conductivity with loss modulus in PET. Journal of Materials Science Letters, 22. pp. 83-84. ISSN 0261-8028

Navin, Chand (1983) Surface studies of amine treated PET filament. J Tex Res , 8. pp. 83-84.

Navin, Chand (1982) Surface studies of acid treated poly (ethylene terephthalate) filaments. Colloids and Surfaces , 4. pp. 193-195. ISSN 10.1016/0166-6622(82)80008-5

L.G., Shpinova and I.N., Yashchishin and B.R., Chamarthy (1982) Investigation of Microstructure and properties of clinker based glasses and their crystallization PRODUCTS. Central Glass and Ceramic Research Institute Bulletin , 29 (1).

Navin, Chand (1982) Free volume and ionic dc conductivity in polymers. Journal of Applied Polymer Science, 27. pp. 4889-4891. ISSN 0021-8995

Navin, Chand (1982) Electrical Prop. Of polymer salt. Pop. Plastics Jan , 3.

Navin, Chand (1982) D.C. conductivity study of Bacl2 adoped PVC A new Tg d.c. conductivity relation. India J. of Phy, 15A.

Navin, Chand (1982) Studies in surface anistrophy of PET fibres by ESCA and SEM. Pop. Plastics. POLYMER COMPOSITES. ISSN 0272-8397

S., Raman (1982) Ultrasonic velocity studies of phase transition of solute while in solution. Acustica, 52.

S., Raman and C.B., Tipnis (1982) Ultrasonic studies in camphene solutions. Ind. J Pure & App. Phys , 20. pp. 79-80.

Dr., Navin Chandra and M. V., Ramanamurti (1981) Properties of Electrical double Layer at Hg/ACetate-salt solution(ap.) Interface. Interface. Journal of the Electrochemistry Society, 30. pp. 270-273. ISSN 0013-4651

B. P. , Krishnan and M. K. , Surappa and P K , Rohtagi (1981) A direct method of preparing cast aluminium alloy-graphite particle composites. Journal of Materials Science, 16. ISSN 0022-2461

P K , Rohtagi and K, Gopakumar (1981) Recovery of tartrate from electroless copper. journal Plating & surface finshing.

P K , Rohtagi and Dr, Deonath (1981) Performance of Mica particles in metals as solid lubricants- Proceedings of Internatinal Conference on Optimum resources utilization through Triboterotechnology and maintenance Management. tribology letters. ISSN 1023-8883

B. P. , Krishnan and P.K. Narayana , Swamy and P K, Rohatgi (1981) Mechanism of improvement in oil spreadability of aluminium alloy graphite particle composites. Trib Int, 14. pp. 301-305.

Dr., Deonath and Dr., Ram, Narayan and Dr., P K Rohatgi (1981) Damping capacity, machinability and physical properties of Cast Al-alloy mica particle composites. Journal of Materials Science, 16. pp. 3025-3032.

Ahirwar, R. S. (1981) Progress Report 1981-1983. Progress Report 1981-1983.

Navin, Chand (1981) Determination of styrene maleic anhydride copolymer composition by ESCA. Pop. Plastic, 3.

P K , Rohtagi and P., Deonath (1981) Preparation of cast aluminium alloy-mica particle composites. Journal of Materials Science, 15. pp. 1241-1251. ISSN 0022-2461

B.P., Krishnan and M.K., Surappa and P K , Rohtagi (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. Journal of Materials Science, 16. pp. 1209-1216. ISSN 0022-2461

C.K.S. , Pallai and P K , Rohtagi (1981) Cause of deterioration of thatch and its prevention. J. Sci. & Ind. .

M.K., Surappa and P K , Rohtagi (1981) Fluidity of aluminum-silicon-alumina composite. Metallurgical Transactions B, 12. pp. 327-332. ISSN 0360-2141

D., Suresh and P K , Rohtagi and J.P., Coutures (1981) Use of solar furnaces materials research. J. Solar Energy,, 26. pp. 377-391.

M.R., Madhava and S., Raman and P K , Rohtagi and M.K., Surappa (1981) Influence of certain microstructural parameters on the ultrasonic velocities and elastic constants of cast aluminium-alumina particle composites. Scripta Metallurgica, 15. pp. 1191-1195.

B. P. , Krishnan and P K , Narayan Swami and P K , Rohatgi (1981) Mechanism of improvement in oil spreadability of aluminium alloy-graphite particle composites. Tribology International, 14. pp. 301-305. ISSN 0301-679X

A., Banerji and S V , Prasad and M.K., Surappa and P K , Rohtagi (1981) Abrasive wear of cast aluminium alloy-zircon particle composites. Wear, 82. pp. 141-151. ISSN 0043-1648

T.K., Dan and V.P., Shreedharan and M., Patel and P K , Rohtagi (1981) Mechanism of blackening of tile surface Ceramic. Ind J India , 90. pp. 11-14.

S.K., Seshadri and R.M., Pillai and P K , Rohtagi (1981) Control fo Cupola Emissions in Iron Foundries Part I Analysis of Cupola Emissions. Indian Foundry J., 28. pp. 1-3.

S.K., Seshadri and R.M., Pillai and P K , Rohtagi (1981) Control of Cupola Emission in Iron Foundries Part II Measures to Increase productivity and reduce pollution in Cupola. Indian Foundry J., 28. pp. 13-25.

Dr., Navin Chandra and G., Subramanain and G., Prabhakar Rao (1980) Development of Ion selective electrode. Transacion of the SAEST, 15. pp. 243-249.

Dr., C V Pavitharan and Dr., P K Rohatgi and Dr., K Gopa Kumar (1980) Preparation of copper-coated titania particles for composites. Journal of Materials Science. ISSN 1573-4803

Ahirwar, R. S. (1980) Progress Report 1890. Annual report.

Dr., Navin Chandra and M. V., Ramanamurti (1978) Ionic Adsorption at Hg/NH4Cl(aqueous) Interface. Journal of the Indian Chemistry Society.. pp. 1276-1279. ISSN 0019-4522

Dr., Navin Chandra and G., Subramanian and G., Prabhakar Rao (1978) Application of Ion-selective electrodes to metal finishing industries. Journal of the Electrochemistry Society.. ISSN 0013-4651

Dr., Navin Chandra and M. V., Ramanamurti (1976) effect of Methanol Content on Specific Adsorption of Chloride Ions at Hg/HCL Interface. Indian Journal of Chemistry, 15A. pp. 677-679. ISSN 0971-457X

A R, Sanadi and S V , Prasad and P K , Rohtagi (1958) Natural Fibres and Agro-wastes as fillers and reinforcements in polymer composites. Journal of scientific and industrial research, 44. pp. 437-442.

UNSPECIFIED Applicability of a Dense-Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel.

J., Prabhakar and R. S., Ahiwar and Mohini , Saxena Utilisation of industrial waste redmud in experimental housing at RRL, Bhopal. Ibid. pp. 411-416.

DasGupta, R and B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and A H , Yegneshwaran Overly coatings for slurry erosion control. ibid. pp. 1263-1268.

S , Das and A K , Jha and B K , Prasad and Dr., O. P. Modi and DasGupta, R and A H , Yegneshwaran Microstructure and wear of Al-Si-Zircon particle composite. ibid. pp. 555-560.

J P , Pandey and R. S., Solanki and B K , Saxena and S.P., Mukherjee Condition assessment of coal feed bunders and life improvement study. Ibid. pp. 388-395.

B K , Prasad Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environment. Tribology- Materials, Surfaces and Interfaces.

Sharma, P and Hashmi, S.A.R and Chand, N Thermal and Rheological Behaviour of Ultra-Fine Flyash Filled LDPE Composites. Journal of Applied Polymer Science. ISSN 0021-8995

B K , Prasad Microstructure and Mechanical Properties of Al Alloy and Al Alloy - SiCp Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

Chand, N Development of theolo- gical characteristics of fly ash filledpolypropylene /polycarbonate blends. Metals Materials and Processes.

Chand, N Three-body abrasive wear mechanism for laser irradiated chopped glass fiber reinforced polyester composites. Metals Materials and Processes.

Singh, I.B. Corrosion and sulphate ion reduction studies on Ni and Pt surfaces in with and without V 2 O 5 in ( Li, Na,K) 2 so 4 melt. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Asokan, Aparna and Saxena, Mohini and Asokan, Pappu Fungal Ergosterol as an Indicator of Heavy Metal Accumlation in Soil amended with coal ash. Fersenius Environmental Bulletin.

Chakradhar, B and Padmakaran, Prabha Kinetic constants for anaerobic fixed bed reactor system. Journal IAEM.

Dr., O. P. Modi and Yadav, R.P. and S , Das and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad Three-body abrasion of a cast zinc-aluminum alloy: influence of Al2O3 dispersion and abrasive medium, Wear 249 (2001) 792-799. Wear. ISSN 0043-1648

This list was generated on Mon Apr 12 08:33:20 2021 IST.