Article

UNSPECIFIED Applicability of a Dense-Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel.

A. K., Majumder (2007) Settling velocities of particulate systems-a critical review of some useful models. Minerals and Metallurgical Processing,, 24. pp. 237-242. ISSN 2163-1573

A. K., Majumder and H., Shah and J P, Barnwal (2006) Comparative study on managemegnetite medium stability in a vorsyl separator and in a heavy medium cyclone. Coal Preparation, 26. pp. 165-179. ISSN DOI:10.1080/07349349108960564

A. K., Majumder and H., Shah and P., Shukla and J P, Barnwal (2007) Effect of operating variables on shape of “fish-hook” curves in cyclones. Minerals Engineering, 20. pp. 204-206. ISSN 1754-890X

A. K., Majumder and K.S., Bhoi and J P, Barnwal (2007) Multi gravity separator: an alternate gravity concentrator to process coal fines. Minerals and Metallurgical Processing,, 24. pp. 133-138. ISSN 2163-1573

A.K., Majumdar and J P, Barnwal (2010) Processing of coal fines in a water-only cyclone. Fuel, 90. pp. 834-837.

Banerjee, P.K. and Rao, T.C. and Govindrajan, B and Bapat , J.P. and J P, Barnwal and Chatt erjee, S and Rao, P.V.T (2003) A plant comparision of the vorsyl separator and dense medium cyclone in the treatment of Indian coals. Int. J. Miner. Process.

Banerjee, P.K. and Rao, T.C. and J P, Barnwal and Rao, P.V.T and Bapat , J.P. and Chatt erjee, S and Govindrajan, B (2003) A plant comparison of the vorsyl separator and dense medium cyclone in the treatment of Indian Coals. International Journal of mineral processing.

Bhaskar, K.Udaya and Govindrajan, B and Venugopal, R and Jakho, M.R. and Rao, T.C. (2002) Performance and modeling studies of an MGS for graphite rejection in a lead concentrate. Int. J. Miner. Process.

D.P., Patil and J R G, Andrews and P H T, Unlheer (1997) A lumped discrete population balance model for shear flocculation model development. International Journal of Mineral Processing, 50. pp. 289-306.

Dhillon, P.H and Kundu, A.K and Majumdar, A.K and Choubey, S and J P, Barnwal and Shah, H (2007) Applicability of a Dense Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel. International Journal of Coal Preparation and Utilization.

Dr., Manali Shuklar and Dr., K K Pathak and Dr., K K Dwivedi and Dr., E Ramadarshan (2009) Influence of key test parameter on SPT result. indian journal of engineering and material sciences, 16. pp. 385-389.

H., Shah and A. K., Majumder and J P, Barnwal (2006) Development of water split model for a 76 mm hydrocyclone. Minerals Engineering, 19. pp. 102-104. ISSN 1754-890X

I. B., Singh and G., Venkatachari (1997) Effect of Nacl addition on the voltage noise characteristics during oxidation of iron in NaNo. Indian J. Chem. Techn., 4. pp. 163-166.

J P, Barnwal and A.K., Majumdar and B., Govindarajan (2006) Modeling of coal flotation in a batch and continuous cell operation Coal Preparation. Coal Preparation, 26. pp. 123-136. ISSN DOI:10.1080/07349349108960564

K. Udaya, Bhaskar and B., Govindarajan and J P, Barnwal and K.K., Rao and B.K., Gupta and T.C., Rao (2005) Classification studies of lead–zinc ore fines using water-injection cyclone. International Journal of Minereal Processing, 77. pp. 80-94.

K. Udaya, Bhaskar and Y., Ramamurthy and M. Ravi, Raju and Sumit, Tiwari and J.K., Shrivastava and N. , Ramakrishnan (2007) CFD simulation and experimental validation studies on hydrocyclone. Minerals Engineering. pp. 60-71. ISSN 1754-890X

K.K., Pathak and N. , Ramakrishnan (2007) Optimization of Die Angle and ram Velocity for Rod Extrusion Using Dynamic Material Modeling and Generic Algorithm. Indian jounral of engineering and material sciences, 14. pp. 399-402. ISSN 0971-4588

K.K., Pathak and S., Lomesh and A K , Jha (2009) Process and die design for square tube extrusion. Ind. J Engg. & Mat. Sc., 16. pp. 51-55. ISSN 0971-4588

Majumdar, A.K and J P, Barnwal (2004) Development of new coal washability index. Minerals Engineering. ISSN 1754-890X

Majumdar, A.K and J P, Barnwal and Banerjee, P and Jain, R (2008) Development of a New Proximate Analysis Based Correlation to Predict Calorific Value of Coal. Fuel.

Majumdar, A.K and Tiwari, A and J P, Barnwal (2007) Separation Characteristics of Coal Fines in a Knelson Concentrator – A Hydrodynamic Approach. Coal Preparation. ISSN DOI:10.1080/07349349108960564

Majumdar, A.K and Yerriswamy, P and J P, Barnwal (2003) The "fish-hook" phenomenon in centrifugal separation of fine particles. Minerals Engineering. ISSN 1754-890X

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1995) `Beneficiation Studies on Low Grade Cherty – calcareous Rock Phosphate. Minerals and Metallurgical Processing,, 2. pp. 92-96. ISSN 2163-1573

Murari, Prasad and Saxena, Sona (2004) Sorption mechanism of some Divalent metal Ions Onto Low - Cost Mineral Adsorbent. Industrial & Engineering Chemistry Res.

Murari, Prasad and XU Huan, Yan and P, Wang (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like System by Acid-modified Schorl. Bulletin of The Korean Chemical Society , 31. pp. 803-807.

N., Singhal and Murari, Prasad and N., Gupta and V., Kumar (2007) Modeling of sorption kinetics of divalent metal ions onto mineral absorbent using integral method. J of colloid and Interface Science, 313. pp. 423-427.

Powell, MS and Morell, SS and Latchireddi, S (2001) Development in the understanding of South African styles SAG mills. Minerals Engineering. ISSN 1754-890X

S V , Prasad and A K , Jha and G. S., Upadhya (1988) Dry sliding wear of sintered 6061 aluminium alloy— graphite particle composites. Tribology International, 22. pp. 321-327.

Sanjeev, Saxena and D.S., Ramachandra Murthya (2007) On the accuracy of ductile fracture assessment of through-wall cracked pipes. Engineering Structures,, 29. pp. 789-801.

Singh, I.B. and Murari, Prasad (2004) Study on the Fluoride removal characteristics of mineral (Fluorapatite). Indian journal of chemical technology . ISSN 0971-457X

Singhal, N and Murari, Prasad and Gupta, N and Kumar, V (2007) Modeling the Sorption Kinetics of Divalent Metal Ions on to Mineral Adsorbent Using Integral Method. Journal of Colloidal and Interface Science.

T.C., Rao (1997) their processing and problems Ironmaking Resources and Reserves Estimation. Australasian Institute of Mining and Metallurgy , Carlton. pp. 17-22.

T.C., Rao and A. K., Majumder and B., Govindarajan and T., Sharma and H.S., Ray (1995) An empirical model for chloridising-roasting of potassium in glauconitic sandstone. International Journal of Mineral Processing, 43. pp. 81-89.

T.C., Rao and B., Govindarajan (1994) A simple equation for sink-float data. Minerals Engineering, 7. pp. 1441-1446.

Xu, H and Murari, Prasad and Liu, Yu (2008) Schorl: A Novel Catalyst in Mineral–Catalyzed Fenton-Like System for Dyeing Wastewater Discoloration. Journal of Hazardous Materials. ISSN 0304-3894

Yerriswamy, P and Majumder, A.K. and J P, Barnwal and Govindrajan, B and Rao, T.C. (2003) Studies on Kelsey jig treating Indian coal fines. Mineral processing and Extractive metallurgy .