Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | H | I | J | K | M | N | P | S | T | X | Y
Number of items at this level: 36.

A

A. K., Majumder (2007) Settling velocities of particulate systems-a critical review of some useful models. Minerals and Metallurgical Processing,, 24. pp. 237-242. ISSN 2163-1573

A. K., Majumder and H., Shah and J P, Barnwal (2006) Comparative study on managemegnetite medium stability in a vorsyl separator and in a heavy medium cyclone. Coal Preparation, 26. pp. 165-179. ISSN DOI:10.1080/07349349108960564

A. K., Majumder and H., Shah and P., Shukla and J P, Barnwal (2007) Effect of operating variables on shape of “fish-hook” curves in cyclones. Minerals Engineering, 20. pp. 204-206. ISSN 1754-890X

A. K., Majumder and K.S., Bhoi and J P, Barnwal (2007) Multi gravity separator: an alternate gravity concentrator to process coal fines. Minerals and Metallurgical Processing,, 24. pp. 133-138. ISSN 2163-1573

A.K., Majumdar and J P, Barnwal (2010) Processing of coal fines in a water-only cyclone. Fuel, 90. pp. 834-837.

B

Banerjee, P.K. and Rao, T.C. and Govindrajan, B and Bapat , J.P. and J P, Barnwal and Chatt erjee, S and Rao, P.V.T (2003) A plant comparision of the vorsyl separator and dense medium cyclone in the treatment of Indian coals. Int. J. Miner. Process.

Banerjee, P.K. and Rao, T.C. and J P, Barnwal and Rao, P.V.T and Bapat , J.P. and Chatt erjee, S and Govindrajan, B (2003) A plant comparison of the vorsyl separator and dense medium cyclone in the treatment of Indian Coals. International Journal of mineral processing.

Bhaskar, K.Udaya and Govindrajan, B and Venugopal, R and Jakho, M.R. and Rao, T.C. (2002) Performance and modeling studies of an MGS for graphite rejection in a lead concentrate. Int. J. Miner. Process.

D

D.P., Patil and J R G, Andrews and P H T, Unlheer (1997) A lumped discrete population balance model for shear flocculation model development. International Journal of Mineral Processing, 50. pp. 289-306.

Dhillon, P.H and Kundu, A.K and Majumdar, A.K and Choubey, S and J P, Barnwal and Shah, H (2007) Applicability of a Dense Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel. International Journal of Coal Preparation and Utilization.

Dr., Manali Shuklar and Dr., K K Pathak and Dr., K K Dwivedi and Dr., E Ramadarshan (2009) Influence of key test parameter on SPT result. indian journal of engineering and material sciences, 16. pp. 385-389.

H

H., Shah and A. K., Majumder and J P, Barnwal (2006) Development of water split model for a 76 mm hydrocyclone. Minerals Engineering, 19. pp. 102-104. ISSN 1754-890X

I

I. B., Singh and G., Venkatachari (1997) Effect of Nacl addition on the voltage noise characteristics during oxidation of iron in NaNo. Indian J. Chem. Techn., 4. pp. 163-166.

J

J P, Barnwal and A.K., Majumdar and B., Govindarajan (2006) Modeling of coal flotation in a batch and continuous cell operation Coal Preparation. Coal Preparation, 26. pp. 123-136. ISSN DOI:10.1080/07349349108960564

K

K. Udaya, Bhaskar and B., Govindarajan and J P, Barnwal and K.K., Rao and B.K., Gupta and T.C., Rao (2005) Classification studies of lead–zinc ore fines using water-injection cyclone. International Journal of Minereal Processing, 77. pp. 80-94.

K. Udaya, Bhaskar and Y., Ramamurthy and M. Ravi, Raju and Sumit, Tiwari and J.K., Shrivastava and N. , Ramakrishnan (2007) CFD simulation and experimental validation studies on hydrocyclone. Minerals Engineering. pp. 60-71. ISSN 1754-890X

K.K., Pathak and N. , Ramakrishnan (2007) Optimization of Die Angle and ram Velocity for Rod Extrusion Using Dynamic Material Modeling and Generic Algorithm. Indian jounral of engineering and material sciences, 14. pp. 399-402. ISSN 0971-4588

K.K., Pathak and S., Lomesh and A K , Jha (2009) Process and die design for square tube extrusion. Ind. J Engg. & Mat. Sc., 16. pp. 51-55. ISSN 0971-4588

M

Majumdar, A.K and J P, Barnwal (2004) Development of new coal washability index. Minerals Engineering. ISSN 1754-890X

Majumdar, A.K and J P, Barnwal and Banerjee, P and Jain, R (2008) Development of a New Proximate Analysis Based Correlation to Predict Calorific Value of Coal. Fuel.

Majumdar, A.K and Tiwari, A and J P, Barnwal (2007) Separation Characteristics of Coal Fines in a Knelson Concentrator – A Hydrodynamic Approach. Coal Preparation. ISSN DOI:10.1080/07349349108960564

Majumdar, A.K and Yerriswamy, P and J P, Barnwal (2003) The "fish-hook" phenomenon in centrifugal separation of fine particles. Minerals Engineering. ISSN 1754-890X

Murari, Prasad and A. K., Majumder and T.C., Rao and G. M., Rao (1995) `Beneficiation Studies on Low Grade Cherty – calcareous Rock Phosphate. Minerals and Metallurgical Processing,, 2. pp. 92-96. ISSN 2163-1573

Murari, Prasad and Saxena, Sona (2004) Sorption mechanism of some Divalent metal Ions Onto Low - Cost Mineral Adsorbent. Industrial & Engineering Chemistry Res.

Murari, Prasad and XU Huan, Yan and P, Wang (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like System by Acid-modified Schorl. Bulletin of The Korean Chemical Society , 31. pp. 803-807.

N

N., Singhal and Murari, Prasad and N., Gupta and V., Kumar (2007) Modeling of sorption kinetics of divalent metal ions onto mineral absorbent using integral method. J of colloid and Interface Science, 313. pp. 423-427.

P

Powell, MS and Morell, SS and Latchireddi, S (2001) Development in the understanding of South African styles SAG mills. Minerals Engineering. ISSN 1754-890X

S

S V , Prasad and A K , Jha and G. S., Upadhya (1988) Dry sliding wear of sintered 6061 aluminium alloy— graphite particle composites. Tribology International, 22. pp. 321-327.

Sanjeev, Saxena and D.S., Ramachandra Murthya (2007) On the accuracy of ductile fracture assessment of through-wall cracked pipes. Engineering Structures,, 29. pp. 789-801.

Singh, I.B. and Murari, Prasad (2004) Study on the Fluoride removal characteristics of mineral (Fluorapatite). Indian journal of chemical technology . ISSN 0971-457X

Singhal, N and Murari, Prasad and Gupta, N and Kumar, V (2007) Modeling the Sorption Kinetics of Divalent Metal Ions on to Mineral Adsorbent Using Integral Method. Journal of Colloidal and Interface Science.

T

T.C., Rao (1997) their processing and problems Ironmaking Resources and Reserves Estimation. Australasian Institute of Mining and Metallurgy , Carlton. pp. 17-22.

T.C., Rao and A. K., Majumder and B., Govindarajan and T., Sharma and H.S., Ray (1995) An empirical model for chloridising-roasting of potassium in glauconitic sandstone. International Journal of Mineral Processing, 43. pp. 81-89.

T.C., Rao and B., Govindarajan (1994) A simple equation for sink-float data. Minerals Engineering, 7. pp. 1441-1446.

X

Xu, H and Murari, Prasad and Liu, Yu (2008) Schorl: A Novel Catalyst in Mineral–Catalyzed Fenton-Like System for Dyeing Wastewater Discoloration. Journal of Hazardous Materials. ISSN 0304-3894

Y

Yerriswamy, P and Majumder, A.K. and J P, Barnwal and Govindrajan, B and Rao, T.C. (2003) Studies on Kelsey jig treating Indian coal fines. Mineral processing and Extractive metallurgy .

This list was generated on Fri Nov 22 02:48:11 2024 IST.