B

B K , Prasad (2002) Abrasive Wear Characteristics of a Zinc-Based Alloy and Zinc-Alloy/ SiC Composite. wear, 252. pp. 250-263. ISSN 0043-1648

B K , Prasad (1997) Dry Sliding Wear Behaviour of Zinc-Based Alloy: Influence of Heat Treatment and Sliding Speed and Pressure. Materials Science and Technology, 13. pp. 928-936. ISSN 0267-0836

B K , Prasad (1997) Dry Sliding Wear Response of Some Bearing Alloys as Influenced by the Nature of the Microconstituents and Sliding Conditions. Metallurgical and Materials Transactions , 28A. pp. 809-815. ISSN 1073-5623

B K , Prasad (2003) Dry Sliding Wear Response of a Zn-Based Alloy Containing 37.5% Al as Affected by Sliding Conditions. Zeitschrift Fur Metallkunde. pp. 897-902. ISSN 1862-5282

B K , Prasad (2007) Dry sliding wear response of a Zn-based alloy con6taining 37.5 % al as affected by sliding conditions. Zeitschrift fur metallkunde.

B K , Prasad (2007) Dry sliding wear response of zinc-based alloy over a range of test speeds and loads: a comparative study with cast iron. tribology letters, 25. pp. 103-115. ISSN 1023-8883

B K , Prasad (1998) Effect of Heat Treatment on Tensile Properties of Zinc-37.5 Mass % Aluminium Alloy Containing Nickel or Silicon. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

B K , Prasad (2000) Effect of Microstructure on the Sliding Wear Performance of a Zn-Al-Ni Alloy. Wear, 240. pp. 100-112. ISSN 0043-1648

B K , Prasad (2005) Effectiveness of an Externally Added Solid Lubricant on the Sliding Wear Response of a Zinc–Aluminium Alloy, Its Composite and Cast Iron. tribology letters, 18. pp. 135-143. ISSN 1023-8883

B K , Prasad (2010) Effects of Alumina Dispersion on the Erosive-Corrosive Wear Response of a Zinc-Based Alloy under Changing Slurry Conditions and Distance. Wear, 238. ISSN 0043-1648

B K , Prasad (2005) Effects of Heat Treatment on the Lubricated Sliding Wear Behaviour of Zinc–Based Alloy Containing Nickel under Varying Test Conditions. Zeitschrift Fur Metallkunde. pp. 1321-1327. ISSN 1862-5282

B K , Prasad (1999) Effects of Heat Treatment on the Partially Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Materials Transactions of Japan Institute of Metals, 18. pp. 578-585. ISSN 1345--9678

B K , Prasad (2000) Effects of Partially Substituting Copper by Silicon on the Physical, Mechanical and Wear Properties of Zn-37.5% Al-Based Alloy. Materials Characterization. pp. 301-308. ISSN 1044-5803

B K , Prasad (2012) Effects of Some Solid Lubricant Particles and Their Concentration in Oil towards Controlling the Wear Performance of a Leaded-Tin Bronze Bush. Canadian Metallurgical Quarterly, 51. ISSN 0008-4433

B K , Prasad (1997) Effects of silicon addition and test parameters on the sliding wear characteristics of zinc-based alloy containing 37.5% aluminium. Materials transactions - JIM, 38. pp. 701-706. ISSN 0916-1821

B K , Prasad (2006) Influence of Alumina Dispersoid and Test Parameters on Erosive Wear Behaviour of a Cast Zinc-Aluminium alloy. Wear, 260. pp. 895-902. ISSN 0043-1648

B K , Prasad (2004) Influence of Heat Treatment Parameters on the Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Wear. pp. 1137-1144. ISSN 0043-1648

B K , Prasad (1996) Influence of Heat Treatment on the Physical, Mechanical and Tribological Properties of a Zinc-Based Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad (2003) Influence of Some Material and Experimental Parameters on the Sliding Wear Behaviour of a Zinc-Based Alloy, Its Composite and a Bronze. Wear. pp. 35-46. ISSN 0043-1648

B K , Prasad (2002) Influence of Some Test Parameters on Dry Sliding Wear Characteristics of a Zinc-11.5% Aluminium Alloy. Journal of Materials Engineering and Performance,, 11. pp. 461-468. ISSN 1059-9495

B K , Prasad (2009) Influence of Suspended Talc Particles in Oil And Nature of Material Microconstituents on Sliding Wear Characteristics of Cast Iron and Zinc-based Alloy. Canadian Metallurgical Quarterly, 48. pp. 455-464. ISSN 0008-4433

B K , Prasad (2007) Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions. Wear, 262. pp. 262-273. ISSN 0043-1648

B K , Prasad (2010) Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil. Journal of Materials Engineering and Performance, 19. pp. 413-420. ISSN 1059-9495

B K , Prasad (1997) Mechanical Properties and Sliding Wear Characteristics of Zinc-Based Alloys: Effects of Partially Substituting Copper by Silicon. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

B K , Prasad (2003) Microstructural Alterations Through Heat Treatment and Its Influence on Wear Response of a Silicon Containing Zinc-Based Alloy Under Different Test Conditions. Materials Science and Technology, 19. pp. 327-335. ISSN 0267-0836

B K , Prasad (1997) Microstructural Features Controlling the Sliding Wear Response of Some Bearing Alloys. Zeitschrift Fur Metallkunde, 88. pp. 774-780. ISSN 1862-5282

B K , Prasad Microstructure and Mechanical Properties of Al Alloy and Al Alloy - SiCp Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

B K , Prasad (2000) Microstructure and Tensile Property Characterization of a Nickel Containing Zinc-Based Alloy: Effects of Heat Treatment and Test Conditions. Materials Science and Engineering A, 277A. pp. 95-101. ISSN 0921-5093

B K , Prasad (1991) The Significance of Matrix Microstructure on the Solid Lubrication Characteristics of Graphite in Aluminium Alloys. Materials Science and Engineering A,, 144A. ISSN 0921-5093

B K , Prasad (2004) Sliding Wear Behaviour of Bronzes under Varying Material Composition, Microstructure and Test Conditions. Wear, 257. pp. 110-123. ISSN 0043-1648

B K , Prasad (2011) Sliding Wear Behaviour of Zinc-Based Alloy vis-à-vis Gray Cast Iron as Influenced by Applied Load and Sliding Speed. Industrial Lubrication and Tribology. pp. 158-170. ISSN 0036-8792

B K , Prasad (2009) Sliding Wear Behaviour of a Cast Iron as Affected by Test Environment and Applied Load. Industrial Lubrication and Tribology. ISSN 0036-8792

B K , Prasad (2008) Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environmen. Tribology- Materials, Surfaces and Interfaces.

B K , Prasad Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environment. Tribology- Materials, Surfaces and Interfaces.

B K , Prasad (1998) Sliding Wear Response of Al-Cu Alloy: The Influence of SiC Particles reinforcement. Journal of Materials Science Letters, 17. pp. 1121-1123. ISSN 0261-8028

B K , Prasad (2007) Sliding Wear Response of Cast Iron as Influenced by Micro structural Features and Test Condition. Materials Science and Engineering A, 456. pp. 373-385. ISSN 0921-5093

B K , Prasad (2008) Sliding Wear Response of Spheroidal Graphite Cast Iron as influenced by Applied Pressure, Sliding Speed and Test Environment. Canadian Metallurgical Quarterly.

B K , Prasad (2012) Sliding Wear Response of a Bronze Bushing: Influence of Applied Load and Test Environment. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (2011) Sliding Wear Response of a Gray Cast Iron: Effects of Some Experimental Parameters. Tribology International. pp. 660-667. ISSN 0301-679X

B K , Prasad (2005) Sliding Wear Response of a Zinc-Based Alloy and Its Composite and Comparison with a Gray Cast Iron: Influence of External Lubrication and Microstructural Features. Materials Science and Engineering A,. pp. 427-439. ISSN 0921-5093

B K , Prasad (2006) Sliding wear response of a cast iron under varying test environments and traversal speed and pressure conditions. Wear, 260. pp. 1333-1341. ISSN 0043-1648

B K , Prasad (2006) Slurry Wear Behavior of Zinc-Based Alloys: Influence of Some Material and Test Parameters. tribology letters, 21. pp. 113-119. ISSN 1023-8883

B K , Prasad (2003) Slurry Wear Characteristics of a Zinc-Based Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (1994) Structure-Property Related Changes in a Hypoeutectic Aluminium-Silicon Alloy Induced by Solutionizing. Materials Transactions of Japan Institute of Metals, 35. pp. 873-878. ISSN 1345--9678

B K , Prasad (1993) Structure-Property Relations in a Hypereutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Journal of Materials Science, 28. pp. 100-104. ISSN 0022-2461

B K , Prasad (1998) Tensile Properties of Some Zinc-Based Alloys Comprising 27.5 Al: Effects of Alloy Composition, Microstructure and Test Conditions. Materials Science and Engineering A. pp. 257-266. ISSN 0921-5093

B K , Prasad (2004) Wear Response of a Zinc-Based Alloy Containing Silicon as Influenced by Material Microstructure and Test Conditions. Materials Science and Engineering A, 367. pp. 63-73. ISSN 0921-5093

B K , Prasad and J P , Pandey (1997) Dry Sliding Wear Behaviour of a Zinc-Based Alloy Against Different Counterface Materials. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

B K , Prasad and A K, Gupta (2013) Effects of Microstructural Features and Test Parameters on the Abrasive Wear Response of an Al-Si Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and A K, Gupta and S , Das and R K, Panjoo (2012) Mechanical and Abrasive and Erosive-Corrosive Wear Properties of Eutectic Al-Si Alloy: Effects of T6 Heat Treatment Parameter. Transactions of Nonferrous Society of China. ISSN 1003-6326

B K , Prasad and A K , Patwardhan and Dr., A H Yegneshwaran (1997) Tensile properties of some Zn 27.5 Wt.% Al alloys as influenced by heat treatment and test conditions. JOURNAL OF MATER IAL S SC IENCE LETTERS, 16. pp. 1890-1893. ISSN 0261-8028

B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and Dr., A H Yegneshwaran (1995) Abrasive Wear Characteristics of a Zn - 37.2 Al - 2.5 Cu - 0.2 Mg Alloy Dispersed with Silicon Carbide Particles. Materials Transactions of Japan Institute of Metals. pp. 1048-1057. ISSN 1345--9678

B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and A H , Yegneshwaran (1993) Three-Body Abrasive Wear Behaviour of 0.98% C Steel. Wear. ISSN 0043-1648

B K , Prasad and D.P., Mondal and S , Das (1998) Study of Erosive-Corrosive Wear Behaviour of an Aluminium Alloy Composite through Factorial Design of Experiments. Wear, 217A. pp. 1-6. ISSN 0043-1648

B K , Prasad and DasGupta, R and Dr., O. P. Modi and A K , Jha (1999) A Comparison of Material Removal Mechanism under Low Stress Abrasive Condition of Steel and Hardfacing Alloys. Journal of Materials Engineering and Performance. pp. 437-442. ISSN 1059-9495

B K , Prasad and DasGupta, R and Dr., O. P. Modi and S , Das and A K , Jha and Dr., A H Yegneshwaran (1997) Surface engineering A potential technique for improving the performance of mining and agricultural implements . J. Surface Engineering., 13. pp. 123-127.

B K , Prasad and Dr, S P Gupta (1986) The Effect of Thermal Cycling on the Kinetics of Cellular Phase Transformation in a Cu-In Alloy. Materials Science and Engineering. Materials Science and Engineering, 77. pp. 181-190. ISSN 0921-5093

B K , Prasad and Dr, S V Prasad and Dr, A A Das (1992) Abrasion-Induced Microstructural Changes and Material Removal Mechanisms in Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science, 27. pp. 4489-4494. ISSN 0022-2461

B K , Prasad and Dr., A H Yegneshwaran and A, Roy and DasGupta, R (1999) Effect of Experimental Factors on the High Stress Abrasive Wear Behaviour of Steels and a Software Package for its Prediction. Journal of Materials Engineering and Performance, 8. pp. 375-379. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Characterization of the Wear Response of a Modified Zinc-Based Alloy vis-a-vis a Conventional Zinc-Based Alloy and a Bearing Bronze at a High Sliding Speed. Metallurgical and Materials Transactions , 27A. pp. 3513-3525. ISSN 1073-5623

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Dry Sliding Wear Behaviour of a Modified Zinc-Based Alloy. Materials Transaction of Japan Institute of Metals, 38. pp. 197-204. ISSN 1345--9678

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Dry Sliding Wear Characteristics of Some Zinc-Aluminium Alloys: A Comparative Study with a Bearing Bronze at a Slow Speed. Wear, 199. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Factors Controlling the Dry Sliding Wear Behaviour of a Leaded-Tin Bronze. Materials Science and Technology. pp. 427-435. ISSN 0267-0836

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of Aluminium Content on the Physical, Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Zeitschrift Fur Metallkunde, 88. pp. 33-338. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of the Nature of Microconstituents on the Tensile Properties of a Zinc-Based Alloy and a Leaded-Tin Bronze at Different Strain Rates and Temperatures. Journal of Materials Science, 32. pp. 1169-1175. ISSN 0022-2461

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Microstructural Modifications Through Compositional Alterations and Their Influence on the Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Scripta Materiallia, 27. pp. 323-328. ISSN 1359-6452

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1998) Microstructure and Property Characterization of a Modified Zinc-Based Alloy and Comparison with Bearing Alloys. Journal of Materials Engineering and Performance, 7. pp. 130-135. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Microstructure-Property Characterization of Some Zinc-Based Alloys: Effects of Heat Treatment Parameters. Zeitschrift Fur Metallkunde,, 87.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (2001) Wear Characteristics of a Zinc-Based Alloy Compared with a Conventional Bearing Bronze under Mixed Lubrication Condition: Effects of Material and Test Parameters. Canadian Metallurgical Quarterly, 40. pp. 193-210.

B K , Prasad and Dr., A H Yegneshwaran and Dr., O. P. Modi and Dr., K Venkat (1996) Influence of the Size and Morphology of Silicon Particles on the Physical, Mechanical and Wear Properties of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 15. pp. 1773-1776. ISSN 0261-8028

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (2003) Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel. Wear, 254. pp. 120-128. ISSN 0043-1648

B K , Prasad and Dr., D P Mondal and DasGupta, R and S , Das (1999) Mechanism of Material Removal During Erosion-Corrosion of an Al-SiC Particle Composite. Wear, 236. 295-302. ISSN 0043-1648

B K , Prasad and Dr., J P Pandey (1998) Sliding Wear Response of a Leaded-Tin Bronze: The Influence of the Counterface Material Characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi (2008) Sliding Wear Response of Zinc-Based Alloy as affected by Suspended Solid Lubricant Particles in Oil Lubricant. . Tribology - Materials, Surfaces and Interfaces.

B K , Prasad and Dr., O. P. Modi (2009) Slurry Wear Characteristics of Zinc-Based Alloys: Effects of Sand Content of Slurry, Silicon Addition to Alloy System and Traversal Distance. Transactions of Nonferrous Society of China. ISSN 1003-6326

B K , Prasad and Dr., O. P. Modi and A H , Yegneshwaran (2008) Wear Behaviour of Zinc-Based Alloys as Influenced by Alloy Composition, Nature of the Slurry and Traversal distance. Wear, 264. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and A K , Jha and A K , Patwardhan (2001) Effects of Some Material and Experimental Variables on the Slurry Wear Characteristics of Zinc-Aluminium Alloys. Journal of Materials Engineering and Performance. pp. 75-80. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and A K , Jha and DasGupta, R (1999) Influence of Material Characteristics on the Abrasive Wear Response of Some Hardfacing Alloys. Journal of Materials Engineering and Performance, 18. pp. 190-196. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1994) Abrasive Wear Behaviour of an AISI 5132 Steel Under Low-Stresses. Materials Transactions of Japan Institute of Metals, 35. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran and Dr., R Dixit (2000) Erosion of a High Carbon Steel in Coal and Bottom Ash Slurries. Journal of Materials Engineering and Performance, 9. pp. 522-5269. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., M. L. Vaidya (1992) Dry Sliding Wear Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Materials Science and Engineering, 15A. pp. 235-245. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha (1994) he Effects of Alumina Fibres on the Sliding Wear of a Cast Aluminium Alloy. Tribology International. Tribology International, 27. pp. 153-158. ISSN 0301-679X

B K , Prasad and Dr., O. P. Modi and Dr., Mohini Sexena and Dr., A K Jha (1993) Erosion-Corrosion Characteristics of an Aluminium Alloy - Alumina Fibre Composite. Wear, 169. pp. 119-124. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and H K , Khaira (2003) High-Stress Abrasive Wear Behaviour of a Zinc-Based Alloy and Its Composite Compared with a Cast Iron under Varying Track Radius and Load Conditions. Materials Science and Engineering A. pp. 343-354. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and M S, Yadav and S, Rathod (2010) Effects of Some Solid Lubricants Suspended in Oil towards Controlling the Wear Performance of a Cast Iron. Journal of Tribology. ISSN 0742-4787

B K , Prasad and Dr., O. P. Modi and Mohini , Saxena and A H , Yegneshwaran and M. L, Vaidya (1992) Corrosion Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science. 3897-3902.. ISSN 0022-2461

B K , Prasad and Dr., O. P. Modi and Mondal, D P and S , Das and Jha, A.K and Dr., A H Yegneshwaran (2001) Erosion- corrosion- abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Material Science and Technology.

B K , Prasad and Dr., S V Prasad (1992) Microstructural Changes During Low-Stress Abrasion of a Plain Carbon (0.5 % C) Steel. Wear, 151. pp. 1-12. ISSN 0043-1648

B K , Prasad and J P , Pandey (1998) Sliding Wear Response of Zinc-Based Alloy and Comparison to a Copper-Based Alloy. Metallurgical and Materials Transactions , 27A. pp. 1245-1255. ISSN 1073-5623

B K , Prasad and J P , Pandey (1998) Sliding wear behavior of a zinc based alloy compared with a leaded tin bronze. ibid. pp. 59-66.

B K , Prasad and J.P., Pandey (1998) Sliding wear5 response of a leaded-tin bronze : The influence of the counterface material characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

B K , Prasad and M, Sharma and G K , Gupta and Dr., O. P. Modi (2013) P/M Processed Titanium Foam: Influence of Morphology and Content of the Space Holder on Microstructure and Mechanical Properties. Powder Metallurgy. ISSN 0032-5899

B K , Prasad and M, Singh and D.P., Mondal and A K , Jha (2001) Dry Sliding Wear Behaviour of an Aluminium Alloy-Granite Particle Composite. . Tribology International.

B K , Prasad and Mohini , Saxena and R K , Morchalle and Asokan, Pappu (2008) Plant Fibre Industrial Waste Reinforced Polymer Composites as a Potential Wood Substitute Material. Journal of Composite Materials.

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) Influence of talc concentration in oil lubricant on the wear response of a bronze journal bearing. Wear, 269. pp. 498-505.

B K , Prasad and S, Rathod and M S, Yadav and Dr., O. P. Modi (2011) Sliding Wear Behaviour of Cast Iron: Influence of MoS2 and Graphite Addition to the Oil Lubricant. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and S , Das (1993) Tribological Behaviour of Aluminium Alloy Composites: A Comparative Study With a Copper Base Alloy. Wear, 162. pp. 64-74. ISSN 0043-1648

B K , Prasad and S , Das and Aruna, Patel (2011) Compressive Deformation Behaviour of Al Alloy (2014)-10wt.% SiCp Composite: Effects of Strain Rate and Temperature. Materials Science and Engineering A. ISSN 0921-5093

B K , Prasad and S.P., Narayan and Dr., O. P. Modi and N. , Ramakrishnan and A M, Kumar and A K, Sachdeva (2012) Effect of Cerium and Aluminium on the Hot-Deformation Behaviour of Magnesium. Zeitschrift Fur Metallkunde, 103. pp. 590-602. ISSN 1862-5282

B K , Prasad and T K, Dan (1991) Some Observations of the Effects of Overheating in a Hypoeutectic Al-Si Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad and T K, Dan and P K , Rohtagi (1993) Characterization and Microstructural Modifications of Pressure Die Cast Eutectic Aluminium-Silicon Alloy-Graphite Composite. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

B K , Prasad and T K, Dan and P K , Rohtagi (1992) Characterization of and Structure-Property Relations in a Pressure Die Cast Hypoeutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad and T K, Dan and P K , Rohtagi (1987) Pressure-induced improvement in interfacial bonding between graphite and the aluminium matrix in graphitic-aluminium particle composites. JOURNAL OF MATERIAL SCIENCE LETTERS.

C

Chand, N and Dwivedi, U.K and Hashmi, S.A.R (2007) Graphite Modified Cotton Fibre Reinforced Polyester Composites under Sliding Wear Conditions. Wear. ISSN 0043-1648

Chand, N and Hashmi, S.A.R (2001) Sliding wear of PP/UHMWPE blends: effect of blend composition. Wear. ISSN 0043-1648

Chen, Y.K. and Dr., O. P. Modi and Chrysanthou, A and Mahay, A.S. and O'Sullivan, J.M. (2003) The effect of different metallic counterface materials and different surface treatments on the wear and friction of polymide 66 and its composite in rolling-sliding contact. J. of Applied Ploymer Science.

D

D.P., Mondal and Goel, M.D and S , Das (2009) Compressive Deformation and Energy Absorption Characteristics of Closed Cell Aluminum-Fly Ash Particle Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

D.P., Mondal and Goel, M.D and S , Das (2008) Effects of Strain Rate and Relative Density on Compressive Deformation Behaviour of Closed Cell Aluminum–Fly Ash Composite Foam. Materials & Design.

DasGupta, R (2010) Sliding Wear Resistance of Al-Alloy Particulate Composites: An Assessment on Its Efficacy. Tribology International. ISSN 0301-679X

DasGupta, R and B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and A H , Yegneshwaran Overly coatings for slurry erosion control. ibid. pp. 1263-1268.

DasGupta, R and B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1997) Slurry Erosive Wear of Hardfaced Steel: Effect of Experimental Parameters. Wear. ISSN 0043-1648

DasGupta, R and Dr., O. P. Modi and Dr., A H Yegneshwaran and Yadav, M S (2001) Steady shear flow properties of organic fiber reinforced LLDPE. Journal of Materials Science Letters 20.

DasGupta, R and Dr., O. P. Modi and Yadav, M S and Dr., A H Yegneshwaran (2001) Mechanisms of material removal under high stress abrasive wear conditions under varying experimental conditions. Journal of Materials Science Letters. ISSN 0261-8028

DasGupta, R and Meenai, Humaira (2003) Sliding wear property of Al-Cu Based alloys with SiC particle reinforced Composites under varying Experimental Conditions. Materials Science letters.

DasGupta, R and S , Das and S., Chaturvedi and A K , Jha (2010) Effect of extrusion on properties of Al-based composite. Transactions of Nonferrous Society of China, 20. pp. 2229-2230. ISSN 1003-6326

Dr., A A Das and Dr., S V Prasad and B K , Prasad (1990) MATERIAL REMOVAL MECHANISMS AND MICROSTRUCTURAL CHANGES DURING ABRASION OF SQUEEZE CAST ALUMINIUM ALLOY-MATRIX COMPOSITES. Journal of Materials Science.

Dr., Navin Chandra and S., Verma and A. C., Khazanchi (1987) Acetylation of sunhemp fibre. Indian journal of textile research, 12.

Dr., O. P. Modi (2001) Two-body abrasion of a cast Al-Cu (2014 Al) alloy - Al2O3 particle composite : influence of heat treatment and abrasion test parameters. Wear. ISSN 0043-1648

Dr., O. P. Modi and B K , Prasad and S , Das and A K , Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Microsture and mechanical and sliding wear properties of Zn-based alloys – Effects of swaging and Al-content Proc of Internationl Conference on Recent Advance in Metallurgical. Processes. New Age International Publishers. pp. 1255-1261.

Dr., O. P. Modi and D.P., Mondal and B K , Prasad and Singh, M and Khaira, H.K. (2003) Abrasive Wear behaviour of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties. Material Science and Engineering A. ISSN 0921-5093

Dr., O. P. Modi and Mohini , Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) Role of ally matrix and dispersoid on the corrosion behavior of cast aluminium alloy composites. Corrosion, 54. pp. 129-134. ISSN 0010-9312

Dr., O. P. Modi and S., Rathod and B K , Prasad and A K , Jha and G., Dixit (2007) The Influence of Alumina Particle Dispersion and Test Parameters on Dry Sliding Wear Behaviour of Zinc-based Alloy. Tribology International, 40. pp. 1137-1140. ISSN 0301-679X

Dwivedi, U.K and Ghosh, A and Chand, N (2007) Abrasive Wear Behaviour of Bamboo (Dendrocalamus Strictus) Powder Filled Polyester Composites. Bio Resources. ISSN 1930-2126

J

Jha, A.K and Gachake, Arati and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran and Singh, M (2002) High Stress Abrasive Wear Behavior of Some Hardfaced Surfaces Produced by Thermal Spraying. Journal of Materials Engineering and Performance. ISSN 1059-9495

K

K.K., Pathak and S., Lomesh and Neeraj , Jain and A.K., Jha (2009) Tube extrusion design for some selected inner profiles. Int. J. Physical Sc. , 4. pp. 69-75.

R

R., Dasgupta and B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (1997) Wear characteristics of a hardfaced steel in slurry. J. Wear, 209. pp. 255-262.

S

S , Das and A K , Jha and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1997) “Aluminium alloy hard particle composites : Potential wear resistant materials”. Proc International conference on Industrial Tribology . pp. 3-16.

S , Das and A K , Jha and B K , Prasad and Dr., O. P. Modi and DasGupta, R and A H , Yegneshwaran Microstructure and wear of Al-Si-Zircon particle composite. ibid. pp. 555-560.

S , Das and D.P., Mondal (2001) Correlation of abrasive wear with microstructure and mechanical properties of pressure die-cast aluminum hard-particle composite. Met. And Mat. Transactions.

S , Das and D.P., Mondal and N. , Ramakrishnan and Sawla, S (2008) Synergic Effect of Reinforcement and Heat Treatment on the Two-Body Abrasive Wear of an Al–Si Alloy under Varying Loads and Abrasive Sizes. Wear. ISSN 0043-1648

S , Das and Rao, R.N. and D.P., Mondal and Dixit, G (2010) Effect of Heat Treatment on the Sliding Wear Behaviour of Aluminium Alloy (Al–Zn–Mg) Hard Particle Composite. Tribiology International. ISSN 43(2010)330-339

S., Rathod and Dr., O. P. Modi and B K , Prasad and A., Chrysanthou and V.P., Deshmukh and A.K., shah and D., Vallauri (2009) Cast in situ Cu-TiC composites: Synthesis by SHS route and characterization. Material Science and Engineering A, 502. pp. 91-98.

Y

Yadav, M.S and D.P., Mondal and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad and DasGupta, R (2003) Effect of sillimanite particle Reinforcement on the dry sliding wears behavior of Aluminum alloy composite. Materials Science and Technology.