B K , Prasad (2010) Effects of Alumina Dispersion on the Erosive-Corrosive Wear Response of a Zinc-Based Alloy under Changing Slurry Conditions and Distance. Wear, 238. ISSN 0043-1648

Full text not available from this repository. (Request a copy)

Abstract

This investigation analyses the influence of dispersed alumina particles on the wear behaviour of a zinc-based alloy in a slurry, comprising suspended sand particles. The influence of the sand content �in the slurry. and travel distance on the wear characteristics of the samples was also studied. Wear rate increased initially with distance, attained a peak, decreased thereafter, and finally, attained a steady-state value at longer distances. These stages were more defined when tests were conducted in the liquid �electrolyte. medium without sand. Addition of sand particles in the electrolyte reduced the wear rate of the specimens. It was also observed that when tests were conducted in the electrolyte plus sand �i.e., slurry with sand., wear rate first increased with the sand content �of the electrolyte., attained a maximum at an intermediate sand concentration, and then finally, decreased as the concentration of sand particles was increased further. The composite showed better wear resistance than the matrix alloy in general. The observations have further been substantiated through the examination of wear surfaces and subsurface regions of the samples. Wear response of the samples has been explained on the basis of �i. predominance of the operating mechanisms of material removal such as corrosive, erosive and abrasive wear under a given test condition, and �ii. the nature and properties like corrosive nature, hardness and interfacial characteristics of the various microconstituents of the samples. The study suggests that the predominance of one or more of the mentioned �materialrexperimental. parameters basically controls the wear behaviour of the specimens, and that the nature of their contribution is further governed by the specific test conditions.

Item Type:	Article
Subjects:	Material/Component Development, Processing and Characterization > Tribology
Divisions:	UNSPECIFIED
Depositing User:	Mr. B.K. Prasad
Date Deposited:	24 Jul 2013 09:37
Last Modified:	24 Jul 2013 09:37
URI:	http://ampri.csircentral.net/id/eprint/77

Actions (login required)

View Item