Article

A., Nigrawal and Navin, Chand (2010) Development and electrical characterization of carbon soot filled polyester graded composites. Materials & Design, 31. pp. 3672-3676.

A., Patnaik and A., Satapathy and Navin, Chand and N.M., Borkula and S., Biswas (2010) Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review. Wear, 268. pp. 249-263. ISSN 0043-1648

A.K., Majumdar and J P, Barnwal (2010) Processing of coal fines in a water-only cyclone. Fuel, 90. pp. 834-837.

Ahirwar, R. S. (2010) progress report 2010-11. annual report.

Ajay , Kumar and K.K., Pathak and M. S., Hora (2010) Application of Neural Networks in Preform Design of Upsetting Process Considering Unequal Interfacial Frictional Conditions. Scholars Research Library. pp. 310-317. ISSN 0975-508X

Ankita , Shukla and Sunil Kumar , Sanghi and V. , Sorna , Gowri and Vishal , , Kumar Baderia and Deepesh Kumar , Singh (2010) Determination of Biogenic Amines in Lake Water by Micellar Electrokinetic Chromatography with Fluorescence Detection after Derivatization with Fluorescamine1. Journal of Analytical Chemistry, 66. pp. 296-300. ISSN 1061-9348

Ansarifar, A and Asokan, Pappu and Yoong, K and Wang, L and Mohamed, Osmani (2010) Characterization and Use of Glass Fibre Reinforced Plastic Waste Powder as Filler in Styrene-Butadiene Rubber. Journal of Rubber Research . ISSN 1511-1768

Asokan, Pappu and Price, A.D.F and Mohamed, Osmani (2010) Improvement of the Mechanical Properties of Glass Fibre Reinforced Plastic Waste Powder Filled Concrete. Construction and Building Materials,. ISSN 0950-0618

B K , Prasad (2010) Effects of Alumina Dispersion on the Erosive-Corrosive Wear Response of a Zinc-Based Alloy under Changing Slurry Conditions and Distance. Wear, 238. ISSN 0043-1648

B K , Prasad (2010) Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil. Journal of Materials Engineering and Performance, 19. pp. 413-420. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and M S, Yadav and S, Rathod (2010) Effects of Some Solid Lubricants Suspended in Oil towards Controlling the Wear Performance of a Cast Iron. Journal of Tribology. ISSN 0742-4787

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) The Influence of Lead Suspension in Oil Lubricant on the Sliding Wear Behaviour of Cast Iron. tribology letters. ISSN 1023-8883

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) Influence of talc concentration in oil lubricant on the wear response of a bronze journal bearing. Wear, 269. pp. 498-505.

Bajpai, S.K and Chand, N and Chourasiya, V (2010) Investigation of Water Vapour Permeability and Antimicrobial Property of Zinc Oxide Nanoparticle Loaded Chitosan Based Edible Film. Journal of Applied Polymer Science. ISSN 0021-8995

Chand, N and Joshi, R and Mary, G and Bajpai, S.K (2010) Thermomechanical Behaviour of Sisal Fibres Grafted with Poly(Acrylamide-Co-N-Vinyl-2-Pyrrolidone) and Loaded with Silver Ions or Silver Nano Particles. Bio Resources. ISSN 1930-2126

Chand, N and Mary, G and Bajpai, S.K and Joshi, R (2010) Thermomechanical Behaviour of Sisal Fibres Grafted with Poly(Acrylamide-Co-N-Vinyl-2-Pyrrolidone) and Loaded with Silver Ions or Silver Nano Particles. Bio Resources. ISSN 1930-2126

Chandra, N and Singh, D.K and Sharma, M and Upadhyay, R.K and S S, Amritphale and Sanghi, S.K. (2010) Synthesis and Characterization of Nano-Sized Zirconia Powder Synthesized by Single Emulsion-Assisted Direct Precipitation. Journal of Colloid and Interface Science. ISSN 0021-9797

D., Singh and D.P., Mondal and Dr., O. P. Modi and V.K., Sethi (2010) Low stress abrasive wear response of boron steel under three body abrasion: Effect of heat treatment and peening intensities. Indian Journal of Engineering and Material Science, 17. pp. 208-218. ISSN 0971-4588

D. K. , Sehgal and K. , Pathak (2010) Gradientless shape optimization using artificial neural networks. Struct Multidisc Optim,, 41. pp. 699-709.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the micro-architecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology, 41. pp. 276-282.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the microarchitecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology,, 41. pp. 276-282.

DasGupta, R (2010) Sliding Wear Resistance of Al-Alloy Particulate Composites: An Assessment on Its Efficacy. Tribology International. ISSN 0301-679X

DasGupta, R (2010) The Stretch, Limit and Path Forward for Particle Rein-forced Metal Matrix Composites of 7075 Al-Alloys. Engineering, 2. pp. 237-256. ISSN 1947-3931

DasGupta, R and S , Das and S., Chaturvedi and A K , Jha (2010) Effect of extrusion on properties of Al-based composite. Transactions of Nonferrous Society of China, 20. pp. 2229-2230. ISSN 1003-6326

Dikshit, S and Gurjar, V and DasGupta, R and Chaturvedi, S and Pathak, K.K and Jha, A.K (2010) Studies on Cold Upsetting Behaviour of AA2014-Based Metal Matrix Composites, FEM Simulation, and Comparison with Experimental Results. Journal of Materials Science. ISSN 0022-2461

Dr., Navin Chandra and Ravi , Kant and Nitish, Gupta and Dr., Upadhyay (2010) Removal of Zn (II) from aqueous solution by using hybrid precursor of silicon and carbon. Bioresource Technology, 101. pp. 3355-3362. ISSN 0960-8524

G., Mary and S.K., Bajpai and Navin, Chand (2010) Antibacterial Activity of Zn-Loaded Grafted Fibers—Mechanical Strength and Biocidal Action. Journal of Natural Fibers. , 7. pp. 34-41. ISSN 1544-0478

Gowri, V.S and Almedia, L and Sanghi, S.K. and Amorim, M.T.P and Esteves, M.F and Pacheco, N.C and Souto, A.P (2010) Functional Finishing of Polyamide Fabrics Using ZNO-PMMA Nanocomposites. Journal of Materials Science. ISSN 0022-2461

Gowri, V.S and Pacheco, N.C and Esteves, M.F and Souto, A.P and Almedia, L (2010) Polymer Nanocomposites for Multifunctional Finishing of Textiles – A Review. Textile Research Journal. ISSN 18(2010)1290-1306

Joshi, P and Sanghi, S.K. and Kundu, S (2010) Immobilization of Monoamine Oxidase on Eggshell Membrane and Its Application in Designing an Amperometric Biosensor for Dopamine. Microchimica Acta. ISSN 0026-3672

K.K., Pathak and Ajay Kumar , Kaviti and M.S., Hora (2010) The application of neural networks in the preform design of the upsetting process. Journal of Materials Science Letters, 62. pp. 55-59. ISSN 1047-4838

K.K., Pathak and S., Lomesh and A K , Jha (2010) Die Profile Design for Tube Extrusion and its Experimental Verification. J. of the Braz. Soc. of Mech. Sci. & Eng,, 32. pp. 160-164.

K.K., Pathak and V.S, Pagey and N. , Ramakrishnan (2010) Optimisation of extrusion die profile to satisfy metallurgical and manufacturing criteria. Materials Science and Technology, 26. pp. 732-737. ISSN 0267-0836

Maheshwari, A.K. and Pathak, K.K and N. , Ramakrishnan and Narayan, S.P (2010) Modified Johnson-Cook Material Flow Model for Hot Deformation Processing. Journal of Materials Science. ISSN 0022-2461

Mohamed, Osmani and Asokan, Pappu (2010) An Assessment of the Compressive Strength of Glass Reinforced Plastic Waste Filled Concrete for Potential Applications in Construction. Concrete Research Letters, 1. pp. 1-5. ISSN 2180-1371

Murari, Prasad (2010) 'Role of schorl's electrostatic field in discoloration of methyl orange wastewater using schorl as catalyst in the presence of H2O2’. Science China Technological Sciences, 53. pp. 3014-3019. ISSN 1674-7321

Murari, Prasad (2010) Role of schorl’s electrostatic field in discoloration of methyl orange wastewater using schorl as catalyst in the presence of H2O2. Technological Sciences, 53. pp. 3014-3019. ISSN 3014-3019

Murari, Prasad (2010) UPTAKE CAPACITY OF ZN2+ BY NATURAL VIETNAMESE BASALT AND THEIR APPLICATION FOR WASTEWATER TREATMENT. N. T. Minh et al., 23. pp. 423-440.

Murari, Prasad (2010) `The Uptake Capacity of Zn(II) by Natural Vietnamese Basalt and their Application for Wastewater Treatment’. Hydrological Science , 23. pp. 323-340.

Murari, Prasad and Vishwajeet , S. YADAV and Jeeshan, Khan and S S, Amritphale and C. B., Raju and M., Singh (2010) `Sequestration of Green House Gases (CO2) by Industrial Hazardous Waste’. Journal of Hazardous Materials, 176. pp. 1044-1050. ISSN 0304-3894

Murari, Prasad and XU Huan, Yan and WANG, Peng, (2010) 'Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like system by Acid-modified schorl’. Bulletin of The Korean Chemical Society, 31. pp. 803-807.

Murari, Prasad and Siddharth , Parimal and Ujjwal , Bhaskar (2010) Prediction of Equillibrium Sorption Isotherm: Comparison of Linear and Nonlinear Methods. Ind. Eng. Chem. Res., 49. pp. 2882-2888. ISSN 0888-5885

Murari, Prasad and Siddharth , Parimal and Ujjwal , Bhaskar (2010) `Prediction of Equillibrium Sorption Isotherm : Comparison of Linear and Non-linear Methods.’. Ind. Eng. Chem. Res., , 49. pp. 2882-2888.

Murari, Prasad and XU Huan, Yan and P, Wang (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like System by Acid-modified Schorl. Bulletin of The Korean Chemical Society , 31. pp. 803-807.

N. , Ramakrishnan and K.K., Pathak and S.P., Narayan and Amit kumar, Maheswari (2010) Modified Johnson–Cook material flow model for hot deformation processing. Journal of Materials Science,, 45. pp. 859-864. ISSN 0022-2461

Navin, Chand and Prabhat , Sharma and M. , Fahim (2010) Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene. Materials Science and Engineering: A, 527. pp. 5873-5878.

Navin, Chand and Prabhat , Sharma and M., Fahim (2010) Tribology of maleic anhydride modified rice-husk filled polyvinylchloride. Wear, 269. pp. 847-853. ISSN 0043-1648

Navin, Chand and R., Joshi (2010) Analysis of Mechanical, Thermal, and Dynamic Mechanical Behaviors of Different Polymer-Coated Sisal Fibers. Journal of Natural Fibers. , 7. pp. 100-110. ISSN 1544-0478

Navin, Chand and S.K., Bajpai and R., Joshi and Grace, Mary (2010) THERMOMECHANICAL BEHAVIOR OF SISAL FIBERS GRAFTED WITH POLY(ACRYLAMIDE-CO-N-VINYL-2-PYRROLIDONE) AND LOADED WITH SILVER IONS OR SILVER NANOPARTICLES. BioResources, 5. pp. 372-388.

P., Joshi and H. C. , Joshi, and S. K. , Sanghi and S., Kundu (2010) Immobilization of monoamine oxidase on eggshell membrane and its application in designing an amperometric biosensor for dopamine. Microchimica Acta, 169. pp. 383-388. ISSN 0026-3672

Pathak, K.K and Lomash, S and Jha, A.K. and N. , Ramakrishnan (2010) Process and Die Profile Design for Tube Extrusion of g Iron. Structural and Multidisciplinary Optimization. ISSN 1615-147X

R.N., Rao and S , Das (2010) Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials & Design, 32. pp. 1066-1071.

R.N., Rao and S , Das (2010) Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites. Materials & Design, 31. pp. 1200-1207.

R.N., Rao and S , Das (2010) Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite. Materials & Design, 31. pp. 3227-3233.

Rajesh Kumar , Bhushan and Sudhir , Kumar and S , Das (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. The International Journal of Advanced Manufacturing Technology, 50. pp. 459-569. ISSN 0268-3768

S , Das and Rao, R.N. and D.P., Mondal and Dixit, G (2010) Effect of Heat Treatment on the Sliding Wear Behaviour of Aluminium Alloy (Al–Zn–Mg) Hard Particle Composite. Tribiology International. ISSN 43(2010)330-339

S K, Singhal and A.K., Srivastava and Dilawar, Nita and Anil K, Gupta (2010) Growth and characterization of boron nitride nanotubes having novel morphologies using mechanothermal process. Journal of Nanoparticle Research, 12. pp. 2201-2210. ISSN 1388-0764

S., Dikshit and V., Gurjar and DasGupta, R and S., Chaturvedi and A K , Jha and K.K., Pathak (2010) Studies on cold upsetting behaviour of AA2014-based metal matrix composites, FEM simulation, and comparison with experimental results. Journal of Material Science , 45. pp. 4174-4179. ISSN 0022-2461

S., Dikshit and V., Gurjar and DasGupta, R and S., Chaturvedi and K.K., Pathak and A K , Jha (2010) Studies on cold upsetting behaviour of AA2014-based metal matrix composites, FEM simulation, and comparison with experimental results. Journal of Material Science , 45. pp. 4174-4179. ISSN 0022-2461

S., Parimal and Murari, Prasad and U., Bhaskar (2010) Prediction of Equilibrium Sorption Isotherm: Comparison of Linear and Nonlinear Methods. Industrial & Engineering Chemical Reasearch, 49. pp. 2882-2888.

S. , Saxena and N. , Ramakrishnan and J.S., Chouhan (2010) Establishing methodology to predict fracture behaviour of piping components by numerically predicting specimen fracture data using tensile specimen test. Engineering Fracture Mechanics, 77. pp. 1058-1072. ISSN 0013-7944.

S.K., Bajpal and Navin, Chand and Grace, Mary (2010) Preparation of poly(acrylonitrile)-grafted silk fibers with antibacterial properties. Fibers and Polymers, 11. pp. 338-345. ISSN 1229-9197

S.K., Shukla and V., Kumar and M, Mudgal and R K, Morchhale and M C, Bansal (2010) Utilization of concentrate of membrane filtration of bleach plant effluent in brick production. J Hazard Mater, 184. pp. 585-590. ISSN 0304-3894

S.K., Singhal and A.K., Srivastava and Anil K, Gupta and Z. G. , Chen (2010) Synthesis of boron nitride nanotubes by an oxide-assisted chemical method. Journal of Nanoparticle Research, 12. pp. 2405-2413. ISSN 1388-0764

Sunil , Kumar and Fa´tima, Esteves and Antonio Pedro , Souto and Noe´mia , Carneiro (2010) Functional finishing of polyamide fabrics using ZnO–PMMA nanocomposites. Journal Material Science, 45. pp. 2427-2435. ISSN 0022-2461

V, Chaurasia and Navin, Chand and S.K., Bajpai (2010) Water Sorption Properties and Antimicrobial Action of Zinc Oxide Nanoparticles-Loaded Cellulose Acetate Films. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 47. pp. 309-317.

V.S., Gowri and L., Almeida and MTP , de Amorim and NC, Pacheco and AP, Souto and MF, Esteves and SK, Sanghi (2010) Functional finishing of polyamide fabrics using ZnO–PMMA nanocomposites. Journal of Material Science , 45. pp. 2427-2435. ISSN 0022-2461

Vishal Kumar , Baderia and V. , Sorna Gowria and Sunil , Kumar (2010) Stable Physically Adsorbed Coating of Poly�Vinyl Alcohol for the Separation of Basic Proteins1. Journal of Analytical Chemistry,, 67. pp. 278-283. ISSN 1061-9348

XU Huan, Yan and Murari, Prasad and Peng, W (2010) Enhanced Removal of Phenol from Aquatic Solution in a Schorl- Catalyzed Fenton-Like System by Acid-Modified Schorl. Bulletin of Korean Chemical Society. ISSN 31(2010)803-807

Yadav , V.S and Murari, Prasad and Khan, J and S S, Amritphale and Singh, M and Raju, C.B (2010) Sequestration of Carbon Dioxide (CO2) Using Redmud. Journal of Hazardous Materials. ISSN 0304-3894