Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | I | J | K | M | N | P | R | S | T | U | V | Y
Number of items at this level: 94.

A

A K , Jha and P K , Rohtagi and T K, Dan and R., Asthana (1987) Effect of dispersed graphite on the freezing rate of gravity die cast LM 13 alloy-3 wt.% graphite particle composite. Journal of Materials Science Letters,, 6. pp. 225-228. ISSN 0261-8028

A K , Jha and S V , Prasad and G. S., Upadhya (1988) Microstructure of rapidly solidified Al-Si graphite composite. Powder Metallurgy International,, 20. pp. 189-20.

A K , Jha and T K, Dan and S V , Prasad and P K , Rohtagi (1986) Al alloy-solid lubricant talc particle composites. Journal of Materials Science, 21. pp. 3681-3685. ISSN 0022-2461

A., Chrysanthou and Dr., O. P. Modi and Li, Han and N. , Ramakrishnan and J.M., O'Sullivan (2008) Formation and microstructure of (Ti, V) C-Reinforced iron matrix composites using self propagating high-temperature synthesis. International Journal of Materials Research, 99. pp. 281-286. ISSN 1862-5282

B

B, Kujur and A.K., Roy and C. B., Raju and M., Patel (1987) Separation of ceramic particles from aluminium metal-ceramic composites. Journal of Materials Science, 22. pp. 962-964. ISSN 0022-2461

B K , Prasad (2003) The Effect of Heat Treatment on Sliding Wear Behaviour of a Zinc-Based Alloy Containing Nickel and Silicon. Tribology Letters, 15. pp. 333-341. ISSN 1023-8883

B. P. , Krishnan and P.K. Narayana , Swamy and P K, Rohatgi (1981) Mechanism of improvement in oil spreadability of aluminium alloy graphite particle composites. Trib Int, 14. pp. 301-305.

C

C. B., Raju (1986) Development of antiwear and chemically durable tiles from themal wastes. Indian Ceram Soci., 45.

C. N., Pathak and A.K., Gupta (1995) Foundary slags for production of glass-ceremics”,Transaction the Institute of Indian Foundrymen. Institute of Indian Foundrymen.. pp. 316-317.

C.K.S. , Pallai and P K , Rohtagi (1981) Cause of deterioration of thatch and its prevention. J. Sci. & Ind. .

Chand, N and Nigrawal, A (2008) Investigations on DC Conductivity Behaviour of Milled Carbon Fibre Reinforced Epoxy Graded Composites. Bulletin of Materials Science. ISSN 0250-4707

Chand, N and Sharma, M.K (2008) Development and Sliding Wear Behavior of Milled Carbon Fibre Reinforced Epoxy Gradient Composites. Wear. ISSN 0043-1648

D

D., Singh and D.P., Mondal and Dr., O. P. Modi and V.K., Sethi (2010) Low stress abrasive wear response of boron steel under three body abrasion: Effect of heat treatment and peening intensities. Indian Journal of Engineering and Material Science, 17. pp. 208-218. ISSN 0971-4588

D.P., Mondal and Dr., Dushyant Singh and Dr., K P Saha (2007) Development of mathmatical model for prediction of abrasive wear behaviour in agriculture grade medium carbon steel. Anisotropic abrasive wear behaviour of bamboo , 18. pp. 125-136.

D.P., Mondal and Dr., M D Goel and S , Das (2009) Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam. Materials and Design, , 30. pp. 1268-1274.

D.P., Mondal and E M, Vinod and S , Das and T S V C , Rao (2008) Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites. Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites, 15. pp. 41-50. ISSN 0971-4588

D.P., Mondal and E.M., Vinod and S , Das and T.S.V.C, Rao (2008) High stress abrasive behavior of shot peened AA2014A1-alloy. Ind J of Engineering and Materials Sciences, 15. pp. 41-50.

D.P., Mondal and M.D., Goel and S , Das (2009) Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foam. Materials Science and Engineering: A, 507. pp. 102-109.

D.P., Mondal and N. , Ramakrishnan and K.S., Suresh and S , Das (2007) On the moduli of closed cell aluminum foam. Scripta Materialia, 57. pp. 929-932.

D.P., Mondal and N. , Ramakrishnan and N.V., Ganesh and V.S., Muneshwar and S , Das (2006) Effeat of SiC concentration and strain rate on the compressive deformation behavior of 2014A1-SiCp composite. Materials Science & Engineering A, 433. pp. 18-31.

D.P., Mondal and N. , Ramakrishnan and S , Das (2006) FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites. Material Science & Engineering A, 433. pp. 286-290.

D.P., Mondal and N. , Ramakrishnan and Suresh, K.S. and S , Das (2007) Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A. ISSN 0921-5093

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the micro-architecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology, 41. pp. 276-282.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the microarchitecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology,, 41. pp. 276-282.

D.P., Mondal and S , Das (2006) High Stress abrasive wear behavior of aluminium hard particle composites: Effect of experimental parameters, particle size and volume fraction. Tribology International, 39. pp. 470-478. ISSN 0301-679X

D.P., Mondal and S , Das and A., Badkul and N., Jha (2009) Modelling of Evaporative Cooling of Porous Medium Filled with Evaporative Liquied. CMC-Computers Materials & Continua , 13. pp. 115-134.

D.P., Mondal and S , Das and N. , Ramakrishnan and K. Udaya, Bhaskar (2009) Cenosphere filled aluminum syntactic foam made through stir-casting technique. Composites Part A: Applied Science and Manufacturing, 40. pp. 279-288. ISSN 1359-835x

D.P., Mondal and S , Das and R.N., Rao and M., Singh (2005) Effect of SiC addition and running-in-wear on the sliding wear behaviour of Al–Zn–Mg aluminium alloy. Material Science and Engineering A, 402. pp. 307-319.

D.P., Mondal and S , Das and V., Rajput (2005) Effect of zinc concentration and experimental parameters on high stress abrasive wear behaviour of A1-Zn alloys: A factorial design approach. Material Science and Engineering A, 406. pp. 24-33.

DasGupta, R and Meenai, Humaira and S , Das (2003) Age hardening of Al 201-alloy and 2014-SiC composites. Journal of Materials Science Letters.

DasGupta, R and S , Das and A K , Jha (2012) Sliding Wear Behaviour of Al-7075 based Metal Matrix Composite: Effect of Processing Parameters. Key Engineering Materials,. pp. 555-560. ISSN 1013-9826

Dr., B P Krishnan and Dr., N Raman and Dr., K. Narayanaswamy and Dr., P K Rohatgi (1983) Performance of aluminum alloy graphite bearings in a diesel engine. Tribiology International, 16. pp. 239-244.

Dr., A H Yegneshwaran and Dr., Mohini Sexena and Dr., P K Rohatgi and Dr., Raj Kumar (1986) Surface finishing of Aluminium alloy particulate composites. Plating and Surface Finishing. ISSN 0360-3164

Dr., A K Majumder and Dr., H Shah and Dr., P Shukla and J P, Barnwal (2007) Effect of operating variables on shape of ‘‘fish-hook’’ curves in cyclones. Minerals Engineering, 20. pp. 204-206.

Dr., B. P Krishnan and Dr., P K Rohatgi (1984) Modification of Al–Si alloy melts containing graphite particle dispersions. Metal Technology..

Dr., Deonath and Dr., Ram, Narayan and Dr., P K Rohatgi (1981) Damping capacity, machinability and physical properties of Cast Al-alloy mica particle composites. Journal of Materials Science, 16. pp. 3025-3032.

Dr., O. P. Modi and Dr., A K Singh and Dr., A H Yegneshwaran (1991) Temp. And strain rate effects on tensile behaviour of Al-Mg-2.5 gr. Particulate composite. ibid.. pp. 433-443.

Dr., O. P. Modi and Yadav, R.P. and S , Das and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad Three-body abrasion of a cast zinc-aluminum alloy: influence of Al2O3 dispersion and abrasive medium, Wear 249 (2001) 792-799. Wear. ISSN 0043-1648

Dr., S A R Hashmi and Dr., U K Dwivedi and Dr., D Jain and Dr., A Naik and Navin, Chand (2005) Graphite–Epoxy Graded Material by Centrifugation. Journal of Applied Polymer Science, 96. ISSN 0021-8995

Dr., S K PATEL and Dr., R B PATEL and Dr., A AWADHIA and Navin, Chand and Dr., S L AGRAWA (2007) Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes. Indian Academy of Sciences, 69. pp. 465-475.

Dr., S.A.R. Hashmi and Dr., U.K. Dwivedi (2007) Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites. Journal of Polymer Research, 14. pp. 75-81.

G

G., Mary and Navin, Chand and S.K., Bajpal (2008) A Novel approach to prepare Zn (II) loaded Cotton fibres with antibacterial Property. Journal of Macromolecular Science, 45. pp. 795-803.

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Corrosion behaviour of nano structured sol-gel alumina coated 9Cr-1Mo ferritic steel in chloride bearing environments. Surf. Coat. Tech., 204. pp. 359-365.

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Pitting of AISI 304L stainless steel coated with nano structured sol–gel alumina coatings in chloride containing acidic environments. Corrosion Science, 51. pp. 3057-3063. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Gazala, Ruhi and Dr., O. P. Modi and I. B., Singh and A K , Jha and Dr., A H Yegneshwaran (2006) Wear and electrochemical characterization of sol-gel alumina coating on chemically pre-treated mild steel substrate. Surface and Coatings Technology, 201. pp. 1866-1872.

Gowri, V.S and Pacheco, N.C and Esteves, M.F and Souto, A.P and Almedia, L (2010) Polymer Nanocomposites for Multifunctional Finishing of Textiles – A Review. Textile Research Journal. ISSN 18(2010)1290-1306

H

Hashmi, S.A.R and Chand, N and Kitano, Takeshi (2003) Dynamic Mechanical Behavior of LLDPE Composites Reinforced with Kevlar Fibers/Short Glass Fibers. POLYMER COMPOSITES. ISSN 0272-8397

I

I. B., Singh (1997) accelerated hot corrosion of nickel in alkali sulphate melt. Ind. J. Chem. Tech.. pp. 3-7.

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al–Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

I. B., Singh and G., Venkatachari (1996) Anodic behaviour of Inconel 600, 601 in sulphate solutions. J Bull Electrochemistry, 12. pp. 83-85.

J

Jha, A.K and Dr., O. P. Modi and D.P., Mondal and Singh, M (2002) Two-body abrasive wear behaviour of aluminium alloy-sillimanite particle reinforced composite. Wear. ISSN 0043-1648

K

K.K., Pathak and D.K., Segal and Saleem, Akhtar and S.S., Bhadauria (2007) A review of structure shape optimization techniques. Journal of Structural Engineering, 33 (6). pp. 505-514.

K.K., Pathak and S., Lomesh and A K , Jha (2010) Die Profile Design for Tube Extrusion and its Experimental Verification. J. of the Braz. Soc. of Mech. Sci. & Eng,, 32. pp. 160-164.

K.K., Pathak and S., Lomesh and A K , Jha and N. , Ramakrishnan (2009) Process and die profile design for tube extrusion of γ iron. Structural and Multidisciplinary Optimization, 40. pp. 491-496. ISSN 1615-147X

M

M., Singh and D.P., Mondal and S , Das (2006) Abrasive wear response of aluminium alloysillimanite particle reinforced Composite under low stress condition. Material Science and Engineering A, 419. pp. 59-68. ISSN 0921-5093

M.R., Madhava and S., Raman and P K , Rohtagi and M.K., Surappa (1981) Influence of certain microstructural parameters on the ultrasonic velocities and elastic constants of cast aluminium-alumina particle composites. Scripta Metallurgica, 15. pp. 1191-1195.

Meenal, H and DasGupta, R (2008) High Stress Abrasive Wear Behaviour of Al-2014 alloy and its SiC Composite. International Journal of Microstructure and Materials Properties.

N

Navin, Chand and Archana , Nigrawal and Deepak , Jain (2008) Dielectric Behavior of Maleic Anhydride Grafted Polypropylene (MAgPP) Modified Sisal Fiber Reinforced PP Composites. Journal of Natural Fibers. . pp. 270-288. ISSN 1544-0478

Navin, Chand and M., Mehra (2008) Thermal and D C Conductivity Behavior of Fly ash Filled Polyaniline Composites Polymer. Plastics Technology and Engineering, 47. pp. 883-886.

Navin, Chand and Prabhat , Sharma and M., Fahim (2010) Tribology of maleic anhydride modified rice-husk filled polyvinylchloride. Wear, 269. pp. 847-853. ISSN 0043-1648

Navin, Chand and R., Joshi (2010) Analysis of Mechanical, Thermal, and Dynamic Mechanical Behaviors of Different Polymer-Coated Sisal Fibers. Journal of Natural Fibers. , 7. pp. 100-110. ISSN 1544-0478

Navin, Chand and S.K., Bajpai and R., Joshi and Grace, Mary (2010) THERMOMECHANICAL BEHAVIOR OF SISAL FIBERS GRAFTED WITH POLY(ACRYLAMIDE-CO-N-VINYL-2-PYRROLIDONE) AND LOADED WITH SILVER IONS OR SILVER NANOPARTICLES. BioResources, 5. pp. 372-388.

P

P K , Rohtagi and Dr, Deonath (1981) Performance of Mica particles in metals as solid lubricants- Proceedings of Internatinal Conference on Optimum resources utilization through Triboterotechnology and maintenance Management. tribology letters. ISSN 1023-8883

Panthi, S.K. and Chouhan, J.S and DasGupta, R and N. , Ramakrishnan (2008) Study of Effect of Load on Springback in Sheet Metal Bending. Transactions of the Indian Institute of Metals.

Pathak, K.K and Lomash, S and Jha, A.K and Jain, N (2009) Process and Die Design for Square Tube Extrusion. International Journal of Physical Sciences.

R

R S, Ahirwar (1996) Manufacture of Redmud cement using industrial waste redmud. Udymita Vikas..

R.N., Rao and S , Das (2010) Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials & Design, 32. pp. 1066-1071.

R.N., Rao and S , Das (2010) Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites. Materials & Design, 31. pp. 1200-1207.

R.N., Rao and S , Das (2010) Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite. Materials & Design, 31. pp. 3227-3233.

R.N., Rao and S , Das and D.P., Mondal and G., Dixit (2009) Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites. Wear, 267. pp. 1688-1695. ISSN 0043-1648

Rajesh Kumar , Bhushan and Sudhir , Kumar and S , Das (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. The International Journal of Advanced Manufacturing Technology, 50. pp. 459-569. ISSN 0268-3768

Raju, C.B and Jain, P.K. and Choudary, Shompa and Verma, S and Sahu, S.N (2001) Silicon nitride/SIAION ceramics - A review. Indian Journal of Engg. & Mat Science.

Ruhi, G. and Singh, I.B. and Dr., O. P. Modi (2009) Corrosion Behaviour of Nano-Structured Sol-Gel Alumina Coated 9Cr-1Mo Ferritic Steel in Chloride Bearing Environment. Surface Coating Technology.

S

S , Das (1997) The influence of matrix microstructure and particle reinforcement on the two-body abrasive wear of an Al-Si alloy. Journal of Materials Science Letters, 16. pp. 1757-1760. ISSN 0261-8028

S , Das and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Microstructures of rapidly solidified Al-Si and Al-Si graphite particle composite. INCAL, 80.

S , Das and P K , Rohtagi and Dr., A H Yegneshwaran (1987) Characterisation of rapidly solidified Al-Si alloy. Journal of Materials Science, 2. pp. 3173-3177. ISSN 0022-2461

S., Sawla and S , Das and D.P., Mondal and N. , Ramakrishnan (2007) Microstructure and mechanical properties of Al alloy and Al alloy Si Cp composite foam. Trans Indian Inst Met, 60. pp. 495-504.

S.K., Bajpal and Navin, Chand and Grace, Mary (2010) Preparation of poly(acrylonitrile)-grafted silk fibers with antibacterial properties. Fibers and Polymers, 11. pp. 338-345. ISSN 1229-9197

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J.S., Chouhan (2007) An analysis of spring back in sheet metal bending using finite method (FEM.). Journal of Materials Processing Technology, 186. pp. 120-124.

Sanjeev, Saxena and J S, Chauhan and N., Ramakrishnan (2009) Fatigue life prediction analysis of surface cracked straight pipes. Transactions of The Indian Institute of Metals, 62. pp. 191-195.

Saxena, S and Xu, H and Murari, Prasad (2007) Multi-Component Sorption of Pb(II), Cu(II) And Zn(II) on to Low-Cost Mineral Adsorbent. Journal of Hazardous Materials. ISSN 0304-3894

Singh, I.B. Corrosion and sulphate ion reduction studies on Ni and Pt surfaces in with and without V 2 O 5 in ( Li, Na,K) 2 so 4 melt. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Srinivasan, N and N. , Ramakrishnan (2002) Dynamic materials Modelling and finite element simulation of titanium alloy turbine disc forging. Materials Science and Technology. ISSN 0267-0836

Sunil , Kumar and Fa´tima, Esteves and Antonio Pedro , Souto and Noe´mia , Carneiro (2010) Functional finishing of polyamide fabrics using ZnO–PMMA nanocomposites. Journal Material Science, 45. pp. 2427-2435. ISSN 0022-2461

Swati , Munot and B, Tirupati and M V R L , Murthy and R.N., Yadav and R., Ram (1997) Indentification of recharge transistion and discharge zones through the interpretation of remote sensing data. ICORG. pp. 433-439.

Swati , Munot and B, Tirupati and Raghuvanshi, Ram and R.N., Yadav and E., Peters and M V R L, Murthy (1997) Artificial groundwater recharge in Amzhera village Proceedings of International Conference on Management of Drinking Water Resources at Central Leather Research Institute. Central Leather Research Institute .

T

T.C., Rao and B., Govindarajan (1994) Indexing the washability characteristics of coal. International Journal of Mineral Processing, 42. pp. 285-293.

U

Umesh , K dwivedi and Ajay , Ghosh and Navin, Chand (2007) Abrasive wear behaviour of bamboo powder filled polyester composite. bamboo composites, 7. pp. 693-698.

V

V, Chaurasia and Navin, Chand and S.K., Bajpai (2010) Water Sorption Properties and Antimicrobial Action of Zinc Oxide Nanoparticles-Loaded Cellulose Acetate Films. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 47. pp. 309-317.

V., Rajput and D.P., Mondal and S , Das and A K , Jha and N. , Ramakrishnan (2007) Effect of Si Cp addition on age hardening of aluminum composite and close cell aluminum composite foam. J Mater Sci, 42. pp. 7408-7414. ISSN .1007/s10853-007-1837-x

Y

Y. L., Saraswathi and S , Das and D.P., Mondal (2005) Erosion-Corrosion Behavior of SiC Particle-Reinforced A1-Si Alloy in NaOH Slurry. Metallurgical and Material Trasactions A, 36A. pp. 2259-2262. ISSN 1073-5623

Y.L., Saraswathi and S , Das and D.P., Mondal (2006) Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites. Materials Science & Engineering A, 425. pp. 244-254.

Yadav, M.S and D.P., Mondal and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad and DasGupta, R (2003) Effect of sillimanite particle Reinforcement on the dry sliding wears behavior of Aluminum alloy composite. Materials Science and Technology.

This list was generated on Thu Dec 12 20:21:52 2019 IST.