Article

Asokan, Pappu and Mohamed, Osmani (2009) Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites. Journal of Cleaner Production,, 19. pp. 821-829. ISSN 0959-6526

A., Anshul and S S, Amritphale and Dr., Navin Chandra and N. , Ramakrishnan and A., Shrivastava and U.S.P., Verma (2009) Chemically formulated ceramic gamma ray irradiation shielding materials utilising red mud. Materials Science and and Engineering A, 108. pp. 429-437. ISSN 1743-6753

Ahirwar, R. S. (2009) progress report 2009-10. annual report.

Ansarifar, A and Wang, L and Mohamed, Osmani and Asokan, Pappu (2009) Assessing the Effect of Thermoset Polyester Resin Waste Powder on the Processing and Mechanical Properties of Natural Rubber. Journal of Rubber Research . ISSN 1511-1768

B K , Prasad (2009) Influence of Suspended Talc Particles in Oil And Nature of Material Microconstituents on Sliding Wear Characteristics of Cast Iron and Zinc-based Alloy. Canadian Metallurgical Quarterly, 48. pp. 455-464. ISSN 0008-4433

B K , Prasad (2009) Sliding Wear Behaviour of a Cast Iron as Affected by Test Environment and Applied Load. Industrial Lubrication and Tribology. ISSN 0036-8792

B K , Prasad and Dr., O. P. Modi (2009) Slurry Wear Characteristics of Zinc-Based Alloys: Effects of Sand Content of Slurry, Silicon Addition to Alloy System and Traversal Distance. Transactions of Nonferrous Society of China. ISSN 1003-6326

Chouhan, J.S and Saxena, S and N. , Ramakrishnan (2009) Assessing Fracture Behaviour of Circumferentially TWC Elbows Subjected to Closing and Opening Moment. Nuclear Engineering and Design.

D., Mishra and M.A., Khan and M, Mudgal and P , Padmakara and B., Chakradhar (2009) Performance evaluation of an effluent treatment plant for a pulp & paper mill. Indian journal of chemical technology , 16. pp. 79-83. ISSN 0971-457X

D.P., Mondal and Dr., M D Goel and S , Das (2009) Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam. Materials and Design, , 30. pp. 1268-1274.

D.P., Mondal and Goel, M.D and S , Das (2009) Compressive Deformation and Energy Absorption Characteristics of Closed Cell Aluminum-Fly Ash Particle Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

D.P., Mondal and M.D., Goel and S , Das (2009) Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foam. Materials Science and Engineering: A, 507. pp. 102-109.

D.P., Mondal and S , Das and A., Badkul and N., Jha (2009) Modelling of Evaporative Cooling of Porous Medium Filled with Evaporative Liquied. CMC-Computers Materials & Continua , 13. pp. 115-134.

D.P., Mondal and S , Das and Dr., Nidhi Jha (2009) Dry sliding wear behaviour of aluminum syntactic foam. Materials and Design., 30.

D.P., Mondal and S , Das and N. , Ramakrishnan and K. Udaya, Bhaskar (2009) Cenosphere filled aluminum syntactic foam made through stir-casting technique. Composites Part A: Applied Science and Manufacturing, 40. pp. 279-288. ISSN 1359-835x

Deepti , Mishra and M Akram, Khan and B , Chandrakar and Prabha, padamkaran (2009) performance evaluation of an effluent treatment plant for a plup & paper mill. Indian journal of chemical technology, 16. pp. 79-83.

Dr., K K Pathak and Dr., Rajeev Arya and Dr., Neeraj Jain and Dr., Alok Chaubey (2009) Preform Map for Mild Steel Upsetting and Its Experimental Verification. J. Braz. Soc. Mech. Sci. & Eng., 31.

Dr., Manali Shuklar and Dr., K K Pathak and Dr., K K Dwivedi and Dr., E Ramadarshan (2009) Influence of key test parameter on SPT result. indian journal of engineering and material sciences, 16. pp. 385-389.

Dr., Navin Chandra and Meenakshi , Sharma and Deepesh Kumar , Singh and S S, Amritphale (2009) Synthesis of nano-TiC powder using titanium gel precursor and carbon particles. Materials Letters, 63 (12). pp. 1051-1053. ISSN 0167-577X

Dr., O. P. Modi and B K , Prasad and Dr., A. Chrysanthou and Dr., A K Shah and Dr., V. P. Deshmukh (2009) Erosive–corrosive wear behaviour of Fe–TiC and cobalt based layers separately deposited on En31 steel. Materials Science and Technology, 23. ISSN 0267-0836

Dr., O. P. Modi and Dr., G Ruhi and Dr., I B Singh (2009) Effect of Sintering Atmosphere on the Corrosion and Wear Resistance of Sol-Gel Alumina-Coated Mild Steel Surface. Corrosion. pp. 758-764. ISSN 0010-9312

Dr., O. P. Modi and Dr., G Ruhi and Dr., I B Singh and Dr., A K Jha (2009) characterization of corrosion resistance properties of sel-gel aluminium coating in mine water environment. journal of chemical technology, 16. pp. 216-220.

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2009) Concentration Profile of Glass Fiber Bundles in Epoxy- Based Gradient Composites During Centrifugation. Journal of Applied Polymer Science, 113. pp. 3840-3846. ISSN 0021-8995

Dr., S S Amrithphale and Dr. , Avneesh Anshul and Dr., Navin Chandra and Dr., N Ramakrishnan (2009) Development of celsian ceramics from fly ash useful for X-rayradiation-shielding application. Journal of the European Ceramic Society, 27. pp. 4639-4647.

Dr., S S Amritphale and Dr., Avneesh Anshul and Dr., Navin Chandra and Dr., N. Ramakrishnan (2009) A novel process for making radiopaque materials using bauxite—Red mud. Journal of the European Ceramic Society, 27. pp. 1945-1921.

Dwivedi, U.K and Chand, N (2009) Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite. Applied Composite Materials.

Dwivedi, U.K and Chand, N (2009) Influence of MA-g-PP on Abrasive Wear Behaviour of Chopped Sisal Fibre Reinforced PP Composites. Journal of Materials Processing Technology.

Dwivedi, U.K and Chand, N (2009) Influence of MA-g-PP on Abrasive Wear Behaviour of Chopped Sisal Fibre Reinforced PP Composites. Journal of Materials Processing Technology.

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Corrosion behaviour of nano structured sol-gel alumina coated 9Cr-1Mo ferritic steel in chloride bearing environments. Surf. Coat. Tech., 204. pp. 359-365.

G., Ruhi and Dr., O. P. Modi and I. B., Singh (2009) Pitting of AISI 304L stainless steel coated with nano structured sol–gel alumina coatings in chloride containing acidic environments. Corrosion Science, 51. pp. 3057-3063. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

H A, Temel and Bozkurt, V. and A.K., Majumdar (2009) Selective Oil Agglomeration of Lignite. Energy & Fuels, 23. pp. 779-784. ISSN 0887-0624

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al–Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

K.K., Pathak and M.S., Hora and S., Akhtar (2009) Torque Maps for Sizing Optimization of Torsional Shafts. Journal of Struct. Engg.,, 35. pp. 247-248.

K.K., Pathak and P., Dutt and N. , Ramakrishnan (2009) Evaluation of Local Co-Ordinates in Finite Elements Using Generic Algorithm. J Structural Engineering, 35. pp. 247-248.

K.K., Pathak and S., Lomesh and A K , Jha (2009) Process and die design for square tube extrusion. Ind. J Engg. & Mat. Sc., 16. pp. 51-55. ISSN 0971-4588

K.K., Pathak and S., Lomesh and A K , Jha and N. , Ramakrishnan (2009) Process and die profile design for tube extrusion of γ iron. Structural and Multidisciplinary Optimization, 40. pp. 491-496. ISSN 1615-147X

K.K., Pathak and S., Lomesh and Neeraj , Jain and A.K., Jha (2009) Tube extrusion design for some selected inner profiles. Int. J. Physical Sc. , 4. pp. 69-75.

Murari, Prasad (2009) `Schorl : A novel catalyst in mineral –catalyzed Fenton-like system for dyeing wastewater discoloration’. Journal of Hazardous Materials, 165. pp. 1186-1192. ISSN 0304-3894

Murari, Prasad (2009) Schorl: A novel catalyst in mineral-catalyzed Fenton-like system for dyeing wastewater discoloration. Journal of Hazardous Materials, 165. pp. 1186-1192. ISSN 0304-3894

Murari, Prasad and Nidhi , Singhal and Vineet, Kumar and Neelmani, Gupta (2009) Modeling the Adsorption Kinetics of Divalent Metal Ions onto Pyrophyllite Using the Integral Method. Ind. Eng. Chem. Res, 48. pp. 2125-2128. ISSN 0888-5885

Murari, Prasad and XU Huan, Yan and SHAN , LianWe and QI Shu, Yan (2009) `Discoloration of Rhodamine B dyeing wastewater by schorl- catalyzed Fenton-like reaction’. Science in China Series E: Technological Sciences, 52. pp. 3054-3060.

Murari , Prasad (2009) Discoloration of Rhodamine B dyeing wastewater by schorl-catalyzed Fenton-like reaction. Science in China Series E: Technological Sciences., 52. pp. 3054-3060. ISSN 1006-9321

N. , Ramakrishnan and Chouhan, J.S and Saxena, S (2009) Coupled Phenomenological and Fracture Mechanics Approach to Assess the Fracture Behaviour of TWC Piping Component. Nuclear Engineering and Design. ISSN 0029-5493

Navin, Chand and A., Nigrawal (2009) Development, Dielectric, and Thermal Studies on HAF Carbon-filled Polyester Gradient Composites. Journal of Composite Materials. , 43. pp. 2859-2869. ISSN 0021-9983

Navin, Chand and B. Jhod, Das (2009) Mechanical, electrical and Thermal properties of Maleic Anhydride Modified Rice Husk Filled PVC Composites. Bio Resources, 4. pp. 1228-1242.

Navin, Chand and Bhajan Das, Jhod and Vijai, Kumar (2009) Development, Mechanical, Thermal and Electrical Properties of Linseed Husk Powder Filled PVC Composites. Journal of Biobased Materials and Bioenergy, 3. pp. 165-171. ISSN 1556-6560

Navin, Chand and S.K., Bajpal and Grace, Mary (2009) Coper (II) and copper nanoparticles-loaded chemically modified cotton cellulose fibres with fair antibacterial properties. Journal of Applied polymer Science., 113. pp. 757-766. ISSN 0021-8995

Navin, Chand and U.K ., Dwivedi (2009) Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite. Applied Composite Materials, 16. pp. 93-100. ISSN 0929-189X

P. , Padmakara and B., Chakradhar (2009) Assessment of ground water quality of Bhavnagar Region. Journal of Scientific & Industrial Research , 68. pp. 964-966.

Patel, S. K. and Patel, R.B and Awadhia, A and AGRAWAL, S L (2009) Coupled Phenomenological and Fracture Mechanics Approach to Assess the Fracture Behaviour of TWC Piping Component. Pramana: Journal of Physics.

Pathak, K.K and Lomash, S and Jha, A.K and Jain, N (2009) Process and Die Design for Square Tube Extrusion. International Journal of Physical Sciences.

Qi, S and Xu, H and Shan, L and Murari, Prasad (2009) Discoloration of Rhodamine B Dyeing Wastewater by Schorl-Catalyzed Fenton-Like Reaction. Science in China, Series E: Technological Sciences.

R.N., Rao and S , Das and D.P., Mondal and G., Dixit (2009) Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites. Wear, 267. pp. 1688-1695. ISSN 0043-1648

Ruhi, G. and Dr., O. P. Modi and Singh, I.B. (2009) Pitting Resistance of Nano-Structured Sol-Gel Alumina Coatings in Chloride Containing Acidic Environment. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

Ruhi, G. and Jha, A.K and Singh, I.B. and Dr., O. P. Modi (2009) Characterization of Corrosion Resistance Properties of Sol-Gel Alumina Coating in Mine Water Environment. Indian Journal of Chemical Technolology.

Ruhi, G. and Singh, I.B. and Dr., O. P. Modi (2009) Corrosion Behaviour of Nano-Structured Sol-Gel Alumina Coated 9Cr-1Mo Ferritic Steel in Chloride Bearing Environment. Surface Coating Technology.

S S, Amritphale and Nitish, Gupta and Dr., Navin Chandra (2009) Removal of lead from aqueous solution by hybrid precursor prepared by rice hull. Journal of the Hazardous Materials, 163. pp. 1194-1198. ISSN 2164-6325

S., Rathod and Dr., O. P. Modi and B K , Prasad and A., Chrysanthou and V.P., Deshmukh and A.K., shah and D., Vallauri (2009) Cast in situ Cu-TiC composites: Synthesis by SHS route and characterization. Material Science and Engineering A, 502. pp. 91-98.

S. , Saxena and N. , Ramakrishnan and B.K., Dutta (2009) Determination of stretch zone width using fem. Engineering Fracture Mechanics, 76. pp. 911-920. ISSN 0013-7944.

S. A. R. , Hashmi and U.K ., Dwivedi (2009) SiC dispersed polysulphide epoxy resin based functionally graded material. POLYMER COMPOSITES, 30. pp. 162-168. ISSN 0272-8397

S.K., Panthi and N. , Ramakrishnan and M. , Ahmed and S.S., Singh and M.D., Goel (2009) Finite Element Analysis of sheet metal bending process to predict the springback. Materials & Design, 31. pp. 657-662.

Sanjeev, Saxena and J S, Chauhan and N., Ramakrishnan (2009) Fatigue life prediction analysis of surface cracked straight pipes. Transactions of The Indian Institute of Metals, 62. pp. 191-195.

Saxena, S and N. , Ramakrishnan (2009) An Improved Method for Numerical Determination of SZW Using FEM. Nuclear Engineering and Design. ISSN 0029-5493

Sikand, Rajiv and Arun M, Kumar and Anil K., Sachdev and Alan A , Luo and Vipin, Jain and Anil K, Gupta (2009) AM30 porthole die extrusions—A comparison with circular seamless extruded tubes. Journal of Materials Processing Technology, 209. pp. 6010-6020.

Subhraminiuam, Anandha and Ramakrishanan, K (2009) Rational approximants to 5, 8 and 7-fold two-dimensional tilings. Z. Kristallogr.

U.K ., Dwivedi and Ajoy, Ghosh and Navin, Chand (2009) Role of PVA Modification in Improving the sliding wear behavior of Bamboo. Bio Resources, 4. pp. 522-528. ISSN 1930-2126

U.K ., Dwivedi and Navin, Chand (2009) Influence of MAg PP on abrasive wear behavior of Chopped sisal fibre reinforced PP Composites. Journal of Materials Processing Technology, 209.