Article

A. K., Majumder (2007) Settling velocities of particulate systems-a critical review of some useful models. Minerals and Metallurgical Processing,, 24. pp. 237-242. ISSN 2163-1573

A. K., Majumder and H., Shah and P., Shukla and J P, Barnwal (2007) Effect of operating variables on shape of “fish-hook” curves in cyclones. Minerals Engineering, 20. pp. 204-206. ISSN 1754-890X

A. K., Majumder and K.S., Bhoi and J P, Barnwal (2007) Multi gravity separator: an alternate gravity concentrator to process coal fines. Minerals and Metallurgical Processing,, 24. pp. 133-138. ISSN 2163-1573

A. K., Majumder and V., Tiwari and J P, Barnwal (2007) Separation characteristics of coal fines in a Knelson concentrator-A Hydrodynamic Approach. Coal Preparation, 27. pp. 126-137. ISSN DOI:10.1080/07349349108960564

Ahirwar, R. S. (2007) progress Report 2007-09. annual report 2007-09.

Asokan, Pappu and Mohini , Saxena and Shyam R. , Asolekar (2007) Solid wastes generation in India and their recycling potential in building materials. Indian Journal Of Environmental Protection . pp. 2311-2321.

B K , Prasad (2007) Dry sliding wear response of a Zn-based alloy con6taining 37.5 % al as affected by sliding conditions. Zeitschrift fur metallkunde.

B K , Prasad (2007) Dry sliding wear response of zinc-based alloy over a range of test speeds and loads: a comparative study with cast iron. tribology letters, 25. pp. 103-115. ISSN 1023-8883

B K , Prasad (2007) Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions. Wear, 262. pp. 262-273. ISSN 0043-1648

B K , Prasad (2007) Sliding Wear Response of Cast Iron as Influenced by Micro structural Features and Test Condition. Materials Science and Engineering A, 456. pp. 373-385. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., D P Mondal and Dr., A H Yegneshwaran and Dr., Pallavi Pandit and Dr., A Chrysanthou (2007) High-Stress Abrasive Wear Response of 0.2% Carbon Dual Phase Steel: Effects of Microstructural Features and Experimental Conditions. Materials Science and Engineering A. pp. 303-311. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., S. Rathod and Dr., A K Jha and Dr., G. Dixit (2007) The influence of alumina particle reinforcement and test parameters on dry sliding wear behaviour of zinc-based alloy. Tribology International, 40. pp. 1137-1146. ISSN 0301-679X

B K , Prasad and Dr., O. P. Modi and Dr., V P Deshmukh and Dr., A Chrysanthou and Dr., A K Shah (2007) Erosive-Corrosive Wear Behaviour of Fe-TiC and Cobalt-Based Layers Separately Deposited on En31 Steel. Materials Science and Technology, 23. pp. 910-916. ISSN 0267-0836

Chand, N and Dwivedi, U.K and Hashmi, S.A.R (2007) Graphite Modified Cotton Fibre Reinforced Polyester Composites under Sliding Wear Conditions. Wear. ISSN 0043-1648

Chand, N and Naik, A.M. and Khaira, H.K. (2007) Development of UHMWPE Modified PP/PET Blends and Their Mechanical and Abrasive Wear Behaviour. POLYMER COMPOSITES. ISSN 0272-8397

D.P., Mondal and Dr., Dushyant Singh and Dr., K P Saha (2007) Development of mathmatical model for prediction of abrasive wear behaviour in agriculture grade medium carbon steel. Anisotropic abrasive wear behaviour of bamboo , 18. pp. 125-136.

D.P., Mondal and N. , Ramakrishnan and K.S., Suresh and S , Das (2007) On the moduli of closed cell aluminum foam. Scripta Materialia, 57. pp. 929-932.

D.P., Mondal and N. , Ramakrishnan and Suresh, K.S. and S , Das (2007) Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A. ISSN 0921-5093

DasGupta, R and Swati , Lahiri and A K , Jha and M V R L, Murthy (2007) Selecting an area for technological intervention in the rural sector in India. The Social Science Journal, 44. pp. 187-193. ISSN 1833-1882

Dhillon, P.H and Kundu, A.K and Majumdar, A.K and Choubey, S and J P, Barnwal and Shah, H (2007) Applicability of a Dense Medium Cyclone and Vorsyl Separator for Upgrading Non-Coking Coal Fines for Use as a Blast Furnace Injection Fuel. International Journal of Coal Preparation and Utilization.

Dr., A K Majumder and Dr., H Shah and Dr., P Shukla and J P, Barnwal (2007) Effect of operating variables on shape of ‘‘fish-hook’’ curves in cyclones. Minerals Engineering, 20. pp. 204-206.

Dr., Jeeshan Khan and Dr., S S Amrithphale and Dr., Navin Chandra (2007) A noble binder free and energy efficient process for making ceramic tiles using red mud and sericitic pyrophyllite. Indian Journal of Chemical Technology.. pp. 420-427. ISSN 0971-457X

Dr., Navin Chandra and Meenakshi , Sharma and Sanjeev, Bhasin and Deepti, Pal and S S, Amritphale and T.S.V.C, Rao (2007) Effect of Addition of Talc Mineral on Sintering Characteristics of Pyrophyllite Based Ceramic Tiles Using a phosphjatic binder. Silicates Industriels, 72. pp. 301-310. ISSN 0037-5225

Dr., O. P. Modi and S., Rathod and B K , Prasad and A K , Jha and G., Dixit (2007) The Influence of Alumina Particle Dispersion and Test Parameters on Dry Sliding Wear Behaviour of Zinc-based Alloy. Tribology International, 40. pp. 1137-1140. ISSN 0301-679X

Dr., S A R Hashmi and Dr., Takeshi Kitano (2007) Effects of State Change of Liquid Crystalline Polymer on Dynamic Visco-Elasticity of its Blends with Polyethylene-Terephthalate. Applied Rheology, 17 (6). pp. 64510-1. ISSN 1430-6395

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2007) Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear, 262. pp. 1426-1432. ISSN 0043-1648

Dr., S K PATEL and Dr., R B PATEL and Dr., A AWADHIA and Navin, Chand and Dr., S L AGRAWA (2007) Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes. Indian Academy of Sciences, 69. pp. 465-475.

Dr., S.A.R. Hashmi and Dr., U.K. Dwivedi (2007) Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites. Journal of Polymer Research, 14. pp. 75-81.

Dr., Sanjeev Saxena and Dr., N Ramakrishnan and Dr., B K Dutta and Dr., P Rama Rao (2007) Large deformation FEM analysis of ductile fracture. ICCES, 4. pp. 147-152.

Dr., Takeshi Kitano and Dr., S A R Hashmi (2007) Shear Rate Dependence of Viscosity and First Normal Stress Difference of LCP/PET Blends at Solid and Molten States of LCP. Journal of Applied Polymer Science, 104. pp. 2212-2218. ISSN 0021-8995

Dwivedi, U.K and Ghosh, A and Chand, N (2007) Abrasive Wear Behaviour of Bamboo (Dendrocalamus Strictus) Powder Filled Polyester Composites. Bio Resources. ISSN 1930-2126

Gupta, N and Mandloi, D and S S, Amritphale and Chandra, N and Sirkarwar, A (2007) Removal of Heavy Metals Using Hybrid Precursor Prepared from Agro Residue (Rice Husk). Journal of Environmental Research and Development-1.

Hashmi, S.A.R and Kitano, T (2007) Effect of State Change of Liquid Crystalline Polymer on Dynamic Visco-Elasticity of Its Blends with Polyethylene-Terephthalate. Applied Rheology. ISSN 1430-6395

Hashmi, S.A.R and Kitano, T (2007) Shear Rate Dependence of Viscosity and First-Normal-Stress-Difference of LCP/PET Blends at Solid and Molten States of LCP. Journal of Applied Polymer Science. ISSN 0021-8995

I. B., Singh and K., Chaturvedi and R. K., Mochhale and A H , Yegneshwaran (2007) Thermal treatment of toxic metals of industrial hazardous wastes with fly ash and clay. Journal Hazardous Materials, 141. pp. 215-222.

Jha, A.K and N. , Ramakrishnan and S , Das and D.P., Mondal and Rajput, V (2007) Effect of SiCp Addition on Age-Hardening of Aluminium Composite and Closed Cell Aluminium Composite Foam. Journal of Materials Science. ISSN 0022-2461

K., Udaya Bhaskar and Y., Udaya Bhaskar and N. , Ramakrishnan and J.K. , Srivastava and Supriya, Sarkar (2007) CFD validation for flyash particle classification in hydrocyclones. Minerals Engineering, 20. pp. 290-302.

K. Udaya, Bhaskar and Y., Ramamurthy and M. Ravi, Raju and Sumit, Tiwari and J.K., Shrivastava and N. , Ramakrishnan (2007) CFD simulation and experimental validation studies on hydrocyclone. Minerals Engineering. pp. 60-71. ISSN 1754-890X

K.K., Pathak and D.K., Segal and Saleem, Akhtar and S.S., Bhadauria (2007) A review of structure shape optimization techniques. Journal of Structural Engineering, 33 (6). pp. 505-514.

K.K., Pathak and N. , Ramakrishnan (2007) Optimization of Die Angle and ram Velocity for Rod Extrusion Using Dynamic Material Modeling and Generic Algorithm. Indian jounral of engineering and material sciences, 14. pp. 399-402. ISSN 0971-4588

Majumdar, A.K and Tiwari, A and J P, Barnwal (2007) Separation Characteristics of Coal Fines in a Knelson Concentrator – A Hydrodynamic Approach. Coal Preparation. ISSN DOI:10.1080/07349349108960564

Murari, Prasad and Nidhi, Singhal and Neelmani , Gupta and Vineet, Kumar (2007) Modeling the sorption kinetics of divalent metal ions onto mineral adsorbent using integral method. Journal of Colloid and Interface Science, 313. pp. 423-427. ISSN 0021-9797

N., Singhal and Murari, Prasad and N., Gupta and V., Kumar (2007) Modeling of sorption kinetics of divalent metal ions onto mineral absorbent using integral method. J of colloid and Interface Science, 313. pp. 423-427.

Navin, Chand and A, Naik and H. K, Khaira (2007) Development of UHMWPE modified PP/PET blends and their mechanical and abrasive wear behavior. POLYMER COMPOSITES, 28. pp. 267-272. ISSN 0272-8397

Navin, Chand and A., Naik (2007) Abrasive wear studies on maleic anhydride modified PP and PET Blends. J Engineering Tribology., 221. pp. 489-499.

Navin, Chand and Dr., U.K. Dwivedi and Dr., S.K. Acharya (2007) Anisotropic abrasive wear behaviour of bamboo (Dentrocalamus strictus). Wear, 262. pp. 1031-1037. ISSN 0043-1648

Navin, Chand and U.K ., Dwivedi (2007) Development and tribological behaviour of UHMWPE filled epoxy gradient composites. Wear, 262. pp. 184-190. ISSN 0043-1648

Navin, Chand and U.K ., Dwivedi (2007) High stress abrasive wear study on bamboo Journal of materials processing technology. Journal of materials processing technology, 183. pp. 155-159.

Navin, Chand and U.K ., Dwivedi (2007) Influence of fiber orientation on high stress wear behavior of sisal fiber reinforced epoxy composites. POLYMER COMPOSITES. pp. 437-441. ISSN 0272-8397

Navin, Chandra and Sanjeev, Bhasin and Meenakshi , Sharma and Deepti, Pal (2007) A room temperature process for making Mn2O3 nano-particles and γ-MnOOH nano-rods. Materials Letters, 61. 3728-3732.. ISSN 0167-577X

S , Das and Suresh, K.S. and N. , Ramakrishnan and D.P., Mondal (2007) On the Moduli of Closed-Cell Aluminum Foam. Scripta Materialia.

S S, Amritphale and Chandra, N and Anshul, A and N. , Ramakrishnan (2007) A Novel Process for Making Radiopaque Materials Using Bauxite-Red Mud. Journal of European Ceramic Society.

S S, Amritphale and N. , Ramakrishnan and Chandra, N and Anshul, A (2007) Development of Celsian Ceramics from Fly Ash Useful for X-Ray Radiation Shielding Applications. Journal of European Ceramic Society.

S., Sawla and S , Das and D.P., Mondal and N. , Ramakrishnan (2007) Microstructure and mechanical properties of Al alloy and Al alloy Si Cp composite foam. Trans Indian Inst Met, 60. pp. 495-504.

S. , Saxena and N. , Ramakrishnan and J S, Chauhan (2007) Prediction of smooth elbow behavior using FEM. Trans Indian Inst Met Engineering, 60. pp. 553-558.

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J.S., Chouhan (2007) An analysis of spring back in sheet metal bending using finite method (FEM.). Journal of Materials Processing Technology, 186. pp. 120-124.

Sanjeev, Saxena and D.S., Ramachandra Murthya (2007) On the accuracy of ductile fracture assessment of through-wall cracked pipes. Engineering Structures,, 29. pp. 789-801.

Sanjeev, Saxena and N. , Ramakrishnan (2007) A comparison of micro, meso and macroscale FEM analysis of ductile fracture in a CT specimen (mode I). Computational Material Science, 39. pp. 1-7.

Saxena, S and N. , Ramakrishnan (2007) Characterizing Crack Initiation Load in Circumferentially Through-Wall Cracked Elbows under Bending Load. International Journal of Pressure Vessels and Piping.

Saxena, S and N. , Ramakrishnan (2007) A Comparison of Micro, Meso and Macro Scale FEM Analysis of Ductile Fracture in a CT Specimen (Mode I). Computational Materials Science.

Saxena, S and Xu, H and Murari, Prasad (2007) Multi-Component Sorption of Pb(II), Cu(II) And Zn(II) on to Low-Cost Mineral Adsorbent. Journal of Hazardous Materials. ISSN 0304-3894

Singh, I.B. and Chaturvedi, K and Dr., A H Yegneshwaran (2007) Thermal Immobilization of Cr, Cu and Zn of Galvanizing Waste in the Presence of Clay and Fly Ash. Environment and Technology.

Singhal, N and Murari, Prasad and Gupta, N and Kumar, V (2007) Modeling the Sorption Kinetics of Divalent Metal Ions on to Mineral Adsorbent Using Integral Method. Journal of Colloidal and Interface Science.

Umesh , K dwivedi and Ajay , Ghosh and Navin, Chand (2007) Abrasive wear behaviour of bamboo powder filled polyester composite. bamboo composites, 7. pp. 693-698.

V., Rajput and D.P., Mondal and S , Das and A K , Jha and N. , Ramakrishnan (2007) Effect of Si Cp addition on age hardening of aluminum composite and close cell aluminum composite foam. J Mater Sci, 42. pp. 7408-7414. ISSN .1007/s10853-007-1837-x

Yegneswaran , A.H. and Singh, I.B. and Chaturvedi, K and Morchhale, R.K. (2007) Thermal Immobilization of Toxic Metals of Industrial Waste with Clay and Fly Ash. Journal of Hazardous Materials. ISSN 0304-3894