Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | I | K | M | S | Y
Number of items: 22.

A

Ahirwar, R. S. (2005) Progress report 2005-2007. Annual report.

Amarjeet, Bajaj and Mohini , Saxena and Sangeeta, Shrivastava (2005) Allelopathic effect of Parthenium hysterophorus on the chlorophyll, nitrogen, protein and ascorbic acid content of lantana camara. Alleopathy Journal, 15. pp. 305-310.

Asokan, Pappu and Mohini , Saxena and R. , Asolekar (2005) Coal combustion residues—environmental implications and recycling potentials. Resources, Conservation and Recycling, 43. ISSN 0921-3449

B

B K , Prasad (2005) Effectiveness of an Externally Added Solid Lubricant on the Sliding Wear Response of a Zinc–Aluminium Alloy, Its Composite and Cast Iron. tribology letters, 18. pp. 135-143. ISSN 1023-8883

B K , Prasad (2005) Effects of Heat Treatment on the Lubricated Sliding Wear Behaviour of Zinc–Based Alloy Containing Nickel under Varying Test Conditions. Zeitschrift Fur Metallkunde. pp. 1321-1327. ISSN 1862-5282

B K , Prasad (2005) Sliding Wear Response of a Zinc-Based Alloy and Its Composite and Comparison with a Gray Cast Iron: Influence of External Lubrication and Microstructural Features. Materials Science and Engineering A,. pp. 427-439. ISSN 0921-5093

D

D.P., Mondal and S , Das and R.N., Rao and M., Singh (2005) Effect of SiC addition and running-in-wear on the sliding wear behaviour of Al–Zn–Mg aluminium alloy. Material Science and Engineering A, 402. pp. 307-319.

D.P., Mondal and S , Das and V., Rajput (2005) Effect of zinc concentration and experimental parameters on high stress abrasive wear behaviour of A1-Zn alloys: A factorial design approach. Material Science and Engineering A, 406. pp. 24-33.

DasGupta, R (2005) A Comparative Assessment of the Behavior of Al–Cu Alloy and Its Composite. Journal of Composite Materials, 39. pp. 1561-1575. ISSN 0267-0836

DasGupta, R and Humaira , Meenai (2005) Si-C particulate dispersed composite of am AlZn-Mg-Cu alloy: Property comparison With parent alloy. Materials Characterization, 54. pp. 438-445. ISSN 1044-5803

Dr., Navin Chandra and Nitin, Agnihotri and Priya , Sharma and Sanjeev, Bhasin and S S, Amritphale (2005) Separation of lead ions from aqueous solutions by adsorption at talc surface. Journal of Scientific & Industrial Research, 64. pp. 674-678. ISSN 0022-4456

Dr., Navin Chandra and Nitin, Agnihotri and Sanjeev, Bhasin and A.F. , Khan (2005) Effect of addition of talc on the sintering characteristics of fly ash based ceramic tiles. Journal of the European Ceramic Society, 25. pp. 80-88. ISSN 0955-2219

Dr., S A R Hashmi and Dr., U K Dwivedi and Dr., D Jain and Dr., A Naik and Navin, Chand (2005) Graphite–Epoxy Graded Material by Centrifugation. Journal of Applied Polymer Science, 96. ISSN 0021-8995

Dr., Takeshi Kitano and Dr., S A R Hashmi and Navin, Chand (2005) Influence of steady shear flow on dynamic viscoelastic properties of un-reinforced and Kevlar, glass fibre reinforced LLDPE. Bulletin of Materials Science, 27. pp. 409-415. ISSN 0250-4707

I

I. B., Singh and G., Venkatachari and D.R., Singh and M., Singh and Dr., A H Yegneshwaran (2005) Effect of Cr(VI)-Fe (II) interaction on the corrosion resistances of iron at different Ph in dichromate solutions. Indian journal of chemical technology . pp. 635-640. ISSN 0971-457X

I. B., Singh and K., Chaturvedi and D.R., Singh and Dr., A H Yegneshwaran (2005) Thermal Stabilization of Metal Finishing Waste with Clay. Environmental Technology, 26. pp. 877-883. ISSN 0959-3330

K

K. Udaya, Bhaskar and B., Govindarajan and J P, Barnwal and K.K., Rao and B.K., Gupta and T.C., Rao (2005) Classification studies of lead–zinc ore fines using water-injection cyclone. International Journal of Minereal Processing, 77. pp. 80-94.

K.K., Pathak and S., Panthi and N. , Ramakrishnan (2005) Application of Neural Network in Sheet Metal Bending Process. Defence Science Journal, 55. pp. 125-131. ISSN 0304-3894

M

Manjusha, Shelke and S.K., Sanghi and Amit, Asthana and Sushma, Lamba and Meenakshi , Sharma (2005) Fast seperation and sensitive detection of carcinogenic aromatic amines by reversed phase liquid chromatography coupled with electrochemical detection. Journal of chromatography A, 1089. pp. 52-58.

S

Sanjeev, Saxena and D.S., Ramachandra Murthy (2005) Elastic-Plastic Fracture Mechanics based Prediction of fracture instability in a circumferentially through-wall cracked pipe in bending Trans. Indian Inst. Met., 58. pp. 461-466.

Sushma, Lamba and Sunil , Kumar Sanghi and Amit , Asthana and Manjusha, Shelke (2005) Rapid determination of sulfonamides in millk using micellar electrokinetic chromatography with fluorescence detection. Analytica Chimica Acta, 552. pp. 110-115. ISSN 0003-2670

Y

Y. L., Saraswathi and S , Das and D.P., Mondal (2005) Erosion-Corrosion Behavior of SiC Particle-Reinforced A1-Si Alloy in NaOH Slurry. Metallurgical and Material Trasactions A, 36A. pp. 2259-2262. ISSN 1073-5623

This list was generated on Sun Apr 11 22:19:37 2021 IST.