DasGupta, R and A K , Jha and S , Das (2013) Effect of addition of fine SiC particles on the dry sliding wear behaviour of extruded 2014 Al-alloy. ISRN Tribology. pp. 1-9. ISSN 2090-889X

B K , Prasad and A K, Gupta and S , Das and R K, Panjoo (2012) Mechanical and Abrasive and Erosive-Corrosive Wear Properties of Eutectic Al-Si Alloy: Effects of T6 Heat Treatment Parameter. Transactions of Nonferrous Society of China. ISSN 1003-6326

DasGupta, R and S , Das and A K , Jha (2012) Sliding Wear Behaviour of Al-7075 based Metal Matrix Composite: Effect of Processing Parameters. Key Engineering Materials,. pp. 555-560. ISSN 1013-9826

DasGupta, R and S , Das and A K , Jha (2011) Application Potential for new Al- based materials: Industrial Input. Metallurgical and Materials Transactions A. . ISSN 1073-5623

B K , Prasad and S , Das and Aruna, Patel (2011) Compressive Deformation Behaviour of Al Alloy (2014)-10wt.% SiCp Composite: Effects of Strain Rate and Temperature. Materials Science and Engineering A. ISSN 0921-5093

S , Das and Rao, R.N. and D.P., Mondal and Dixit, G (2010) Effect of Heat Treatment on the Sliding Wear Behaviour of Aluminium Alloy (Al–Zn–Mg) Hard Particle Composite. Tribiology International. ISSN 43(2010)330-339

R.N., Rao and S , Das (2010) Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials & Design, 32. pp. 1066-1071.

DasGupta, R and S , Das and S., Chaturvedi and A K , Jha (2010) Effect of extrusion on properties of Al-based composite. Transactions of Nonferrous Society of China, 20. pp. 2229-2230. ISSN 1003-6326

Rajesh Kumar , Bhushan and Sudhir , Kumar and S , Das (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. The International Journal of Advanced Manufacturing Technology, 50. pp. 459-569. ISSN 0268-3768

R.N., Rao and S , Das (2010) Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites. Materials & Design, 31. pp. 1200-1207.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the micro-architecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology, 41. pp. 276-282.

D.P., Mondal and S , Das (2010) Effect of thickening agent and foaming agent on the microarchitecture and deformation response of closed cell aluminum foam. Material Science and Engineering Technology,, 41. pp. 276-282.

R.N., Rao and S , Das (2010) Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite. Materials & Design, 31. pp. 3227-3233.

D.P., Mondal and S , Das and N. , Ramakrishnan and K. Udaya, Bhaskar (2009) Cenosphere filled aluminum syntactic foam made through stir-casting technique. Composites Part A: Applied Science and Manufacturing, 40. pp. 279-288. ISSN 1359-835x

D.P., Mondal and Goel, M.D and S , Das (2009) Compressive Deformation and Energy Absorption Characteristics of Closed Cell Aluminum-Fly Ash Particle Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

D.P., Mondal and M.D., Goel and S , Das (2009) Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foam. Materials Science and Engineering: A, 507. pp. 102-109.

D.P., Mondal and S , Das and Dr., Nidhi Jha (2009) Dry sliding wear behaviour of aluminum syntactic foam. Materials and Design., 30.

R.N., Rao and S , Das and D.P., Mondal and G., Dixit (2009) Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites. Wear, 267. pp. 1688-1695. ISSN 0043-1648

D.P., Mondal and Dr., M D Goel and S , Das (2009) Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam. Materials and Design, , 30. pp. 1268-1274.

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

I. B., Singh and D.P., Mondal and M., Singh and S , Das (2009) Influence of SiC particles addition on the corrosion behavior of 2014 Al–Cu alloy in 3.5% NaCl solution. Corrosion Science, 51. pp. 234-241. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

D.P., Mondal and S , Das and A., Badkul and N., Jha (2009) Modelling of Evaporative Cooling of Porous Medium Filled with Evaporative Liquied. CMC-Computers Materials & Continua , 13. pp. 115-134.

D.P., Mondal and Goel, M.D and S , Das (2008) Effects of Strain Rate and Relative Density on Compressive Deformation Behaviour of Closed Cell Aluminum–Fly Ash Composite Foam. Materials & Design.

D.P., Mondal and S , Das and Vinod, E.M and Rao, T.S.V.C (2008) High Sress Abrasive Wear Behaviour of Shot Peened AA2014 Al-Alloy. Indian Journal of Engineering Materials Science.

D.P., Mondal and E.M., Vinod and S , Das and T.S.V.C, Rao (2008) High stress abrasive behavior of shot peened AA2014A1-alloy. Ind J of Engineering and Materials Sciences, 15. pp. 41-50.

S , Das and Singh, I.B. and Singh, M and D.P., Mondal (2008) Influence of SiC Particle Addition on the Corrosion Behaviour of 2014 Al-Cu Alloy in 3.5% NaCl Solution. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

D.P., Mondal and E M, Vinod and S , Das and T S V C , Rao (2008) Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites. Investigations on d.c. conductivity behaviour of milled carbon fibre reinforced epoxy graded composites, 15. pp. 41-50. ISSN 0971-4588

S , Das and D.P., Mondal and N. , Ramakrishnan and Sawla, S (2008) Synergic Effect of Reinforcement and Heat Treatment on the Two-Body Abrasive Wear of an Al–Si Alloy under Varying Loads and Abrasive Sizes. Wear. ISSN 0043-1648

D.P., Mondal and N. , Ramakrishnan and Suresh, K.S. and S , Das (2007) Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A. ISSN 0921-5093

V., Rajput and D.P., Mondal and S , Das and A K , Jha and N. , Ramakrishnan (2007) Effect of Si Cp addition on age hardening of aluminum composite and close cell aluminum composite foam. J Mater Sci, 42. pp. 7408-7414. ISSN .1007/s10853-007-1837-x

Jha, A.K and N. , Ramakrishnan and S , Das and D.P., Mondal and Rajput, V (2007) Effect of SiCp Addition on Age-Hardening of Aluminium Composite and Closed Cell Aluminium Composite Foam. Journal of Materials Science. ISSN 0022-2461

S., Sawla and S , Das and D.P., Mondal and N. , Ramakrishnan (2007) Microstructure and mechanical properties of Al alloy and Al alloy Si Cp composite foam. Trans Indian Inst Met, 60. pp. 495-504.

S , Das and Suresh, K.S. and N. , Ramakrishnan and D.P., Mondal (2007) On the Moduli of Closed-Cell Aluminum Foam. Scripta Materialia.

D.P., Mondal and N. , Ramakrishnan and K.S., Suresh and S , Das (2007) On the moduli of closed cell aluminum foam. Scripta Materialia, 57. pp. 929-932.

M., Singh and D.P., Mondal and S , Das (2006) Abrasive wear response of aluminium alloysillimanite particle reinforced Composite under low stress condition. Material Science and Engineering A, 419. pp. 59-68. ISSN 0921-5093

D.P., Mondal and N. , Ramakrishnan and N.V., Ganesh and V.S., Muneshwar and S , Das (2006) Effeat of SiC concentration and strain rate on the compressive deformation behavior of 2014A1-SiCp composite. Materials Science & Engineering A, 433. pp. 18-31.

D.P., Mondal and N. , Ramakrishnan and S , Das (2006) FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites. Material Science & Engineering A, 433. pp. 286-290.

D.P., Mondal and S , Das (2006) High Stress abrasive wear behavior of aluminium hard particle composites: Effect of experimental parameters, particle size and volume fraction. Tribology International, 39. pp. 470-478. ISSN 0301-679X

Y.L., Saraswathi and S , Das and D.P., Mondal (2006) Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites. Materials Science & Engineering A, 425. pp. 244-254.

D.P., Mondal and S , Das and R.N., Rao and M., Singh (2005) Effect of SiC addition and running-in-wear on the sliding wear behaviour of Al–Zn–Mg aluminium alloy. Material Science and Engineering A, 402. pp. 307-319.

D.P., Mondal and S , Das and V., Rajput (2005) Effect of zinc concentration and experimental parameters on high stress abrasive wear behaviour of A1-Zn alloys: A factorial design approach. Material Science and Engineering A, 406. pp. 24-33.

Y. L., Saraswathi and S , Das and D.P., Mondal (2005) Erosion-Corrosion Behavior of SiC Particle-Reinforced A1-Si Alloy in NaOH Slurry. Metallurgical and Material Trasactions A, 36A. pp. 2259-2262. ISSN 1073-5623

DasGupta, R and Meenai, Humaira and S , Das (2003) Age hardening of Al 201-alloy and 2014-SiC composites. Journal of Materials Science Letters.

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (2003) Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel. Wear, 254. pp. 120-128. ISSN 0043-1648

S , Das and D.P., Mondal and Sawla, S and Dixit, S (2002) High Stress Abrasive Wear Mechanism of LM13-SiC Composite Under Varying Experimental Conditions. Metallurgical and Materials Transactions A. ISSN 1073-5623

S , Das and D.P., Mondal (2001) Correlation of abrasive wear with microstructure and mechanical properties of pressure die-cast aluminum hard-particle composite. Met. And Mat. Transactions.

B K , Prasad and Dr., O. P. Modi and Mondal, D P and S , Das and Jha, A.K and Dr., A H Yegneshwaran (2001) Erosion- corrosion- abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Material Science and Technology.

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and S , Das and Dr., D P Mondal and Dr., A H Yegneshwaran (2001) Erosion-Corrosion-Abrasion Characteristics of a Zinc-Based Alloy and Its Composite Containing Alumina Particle Dispersoid. Materials Science and Technology, 17. pp. 1444-1450. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and Dr., R P Yadav and Dr., A K Jha and S , Das and Dr., A H Yegneshwaran (2001) Three Body Abrasion of a Zinc-Aluminium Alloy: Effects of Alumina Dispersoid and Abrasive Medium. Wear, 249. pp. 792-799. ISSN 0043-1648

S , Das and S, Gupta and D.P., Mondal and B K , Prasad (2000) Influence of Load and Abrasive Size on the Two-Body Abrasive Wear of Al-SiC Composites. Aluminium Transactions.

B K , Prasad and Dr., D P Mondal and DasGupta, R and S , Das (1999) Mechanism of Material Removal During Erosion-Corrosion of an Al-SiC Particle Composite. Wear, 236. 295-302. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and Dr., R. P. Yadav and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Microstructure and Wear Behaviour of Zinc-Aluminium Alloys: Effects of Secondary Processing and Alloy Composition. Zeitschrift Fur Metallkunde, 15. pp. 439-443. ISSN 1862-5282

B K , Prasad and Dr., O. P. Modi and DasGupta, R and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Sliding Wear Response of a Zinc-Aluminium Alloy as Affected by SiC Particle Dispersion and Test Conditions. Journal of Materials Science Letters, 18. pp. 1731-1734. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and S , Das and Dr., M. Singh (1999) Slurry Erosion-Corrosion of Aluminium (Al-Cu) Alloy - Silicon Carbide Composites: Effects of Some Material and Experimental Variables. Zeitschrift Fur Metallkunde, 90. pp. 189-194. ISSN 1862-5282

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran (1999) Wear Response of a Zinc-Based Alloy in the Presence of SiC Particle Reinforcement : A Comparative Study with a Copper Base Alloy. Journal of Materials Engineering and Performance, 8. pp. 693-700. ISSN 1059-9495

B K , Prasad and Dr., K Venkateswaralu and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and S , Das (1998) Dry Sliding Wear Behaviour of a Zinc-Based Alloy: A Comparative Study with a Leaded-Tin Bronze. Materials Transactions of Japan Institute of Metals, 39. pp. 1121-1125. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran and S , Das and Dr., K Venkateswaralu (1998) Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 17. pp. 1381-1383. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Effects of Sand Concentration on Slurry Erosion of Steels. Materials Transactions of Japan Institute of Metals, 39. pp. 1185-1190. ISSN 1345--9678

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Hardfacing: A Technique for Combating Abrasive/Erosive Wear. Materials Transactions of Japan Institute of Metals, 39. pp. 1191-1196. ISSN 1345--9678

B K , Prasad and DasGupta, R and Dr., A K Jha and Dr., A H Yegneshwaran and Dr., O. P. Modi and S , Das (1998) Low Stress Abrasive Wear Behaviour of Hardfaced Steel. Journal of Materials Engineering and Performance, 7. pp. 221-226. ISSN 1059-9495

Dr., O. P. Modi and Mohini , Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) Role of ally matrix and dispersoid on the corrosion behavior of cast aluminium alloy composites. Corrosion, 54. pp. 129-134. ISSN 0010-9312

B K , Prasad and Dr., K Venkateswaralu and Dr., O. P. Modi and S , Das and Dr., A K Jha and Dr., A H Yegneshwaran and DasGupta, R (1998) Sliding Wear Behaviour of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions. Metallurgical and Materials Transactions A, 29A. pp. 2747-2752. ISSN 1073-5623

B K , Prasad and D.P., Mondal and S , Das (1998) Study of Erosive-Corrosive Wear Behaviour of an Aluminium Alloy Composite through Factorial Design of Experiments. Wear, 217A. pp. 1-6. ISSN 0043-1648

Dr., O. P. Modi and M., Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) The Role of Alloy Matrix and Dispersoid on the Corrosion Behaviour of Cast Aluminium Alloy Composites. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

S , Das and A K , Jha and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1997) “Aluminium alloy hard particle composites : Potential wear resistant materials”. Proc International conference on Industrial Tribology . pp. 3-16.

B K , Prasad and Dr., A K Jha and DasGupta, R and S , Das and Dr., K Venkateswaralu (1997) Influence of the SiC Reinforcement on the Abrasive Wear Response of an Al-Cu Alloy Under the Conditions of Varying Abrasive Size and Applied Load. Journal of Materials Science Letters, 16. pp. 1113-1115. ISSN 0261-8028

Dr., O. P. Modi and B K , Prasad and S , Das and A K , Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Microsture and mechanical and sliding wear properties of Zn-based alloys – Effects of swaging and Al-content Proc of Internationl Conference on Recent Advance in Metallurgical. Processes. New Age International Publishers. pp. 1255-1261.

DasGupta, R and B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1997) Slurry Erosive Wear of Hardfaced Steel: Effect of Experimental Parameters. Wear. ISSN 0043-1648

B K , Prasad and DasGupta, R and Dr., O. P. Modi and S , Das and A K , Jha and Dr., A H Yegneshwaran (1997) Surface engineering A potential technique for improving the performance of mining and agricultural implements . J. Surface Engineering., 13. pp. 123-127.

R., Dasgupta and B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (1997) Wear characteristics of a hardfaced steel in slurry. J. Wear, 209. pp. 255-262.

S , Das (1997) The influence of matrix microstructure and particle reinforcement on the two-body abrasive wear of an Al-Si alloy. Journal of Materials Science Letters, 16. pp. 1757-1760. ISSN 0261-8028

A K , Jha and S , Das and Dr., O. P. Modi and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1996) Development of materials for shovel teeth for mining industries. J. Mine Tech, 17. pp. 78-82.

B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and Dr., A H Yegneshwaran (1995) Abrasive Wear Characteristics of a Zn - 37.2 Al - 2.5 Cu - 0.2 Mg Alloy Dispersed with Silicon Carbide Particles. Materials Transactions of Japan Institute of Metals. pp. 1048-1057. ISSN 1345--9678

A K , Jha and B K , Prasad and S , Das and Dr., A H Yegneshwaran and Dr., O. P. Modi (1995) Microstructure and wear of Al-alloy matrix composites. Proc. Conf. Industrial Tribology...

B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1994) Abrasive Wear Behaviour of an AISI 5132 Steel Under Low-Stresses. Materials Transactions of Japan Institute of Metals, 35. ISSN 1345--9678

B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and A H , Yegneshwaran (1993) Three-Body Abrasive Wear Behaviour of 0.98% C Steel. Wear. ISSN 0043-1648

B K , Prasad and S , Das (1993) Tribological Behaviour of Aluminium Alloy Composites: A Comparative Study With a Copper Base Alloy. Wear, 162. pp. 64-74. ISSN 0043-1648

S , Das and P K , Rohtagi and Dr., A H Yegneshwaran (1987) Characterisation of rapidly solidified Al-Si alloy. Journal of Materials Science, 2. pp. 3173-3177. ISSN 0022-2461

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behavior of Al RSP-polyester composite. J. Materials Science .

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behaviour of rapidly solidified aluminium-silicon ribbon-polyester composites. Journal of Materials Science Letters. ISSN 0261-8028

S , Das and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Microstructures of rapidly solidified Al-Si and Al-Si graphite particle composite. INCAL, 80.

S , Das and A K , Jha and B K , Prasad and Dr., O. P. Modi and DasGupta, R and A H , Yegneshwaran Microstructure and wear of Al-Si-Zircon particle composite. ibid. pp. 555-560.

DasGupta, R and B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and A H , Yegneshwaran Overly coatings for slurry erosion control. ibid. pp. 1263-1268.

Dr., O. P. Modi and Yadav, R.P. and S , Das and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad Three-body abrasion of a cast zinc-aluminum alloy: influence of Al2O3 dispersion and abrasive medium, Wear 249 (2001) 792-799. Wear. ISSN 0043-1648