Dr., U K Dwivedi and Dr., S A R Hashmi and Navin, Chand and Dr., Naik and Dr., R Joshi (2012) Development and Physico-Mechanical Behavior of LDPE–Sisal Prepreg-Based Composites. POLYMER COMPOSITES.. pp. 650-655. ISSN 0272-8397

G. S., Upadhya and Ravi , Kant and Meenakshi , Sharma and Deepesh Kumar , Singh and S S, Amritphale and Navin, Chand (2012) Photo degradation of synthetic dyes using cadmium sulfide nanoparticles synthesized in the presence of different capping agents. Separation and Purification Technology,, 88. pp. 39-45. ISSN 1383-5866

Dr., U K Dwivedi and Dr., S A R Hashmi and Navin, Chand (2012) Tribological behaviour of PTFE modified cotton polyester composites. Tribiology. pp. 1-6.

Dr., S A R Hashmi and Dr., A Naik and Navin, Chand and Dr., Janu Sharma and Dr, Prabhat Sharma (2011) Development of Environment Friendly Hybrid Layered Sisal–Glass–Epoxy Composites. Composite Interfaces, 18. pp. 671-683. ISSN 0927-6440

Navin, Chand and R., Joshi (2010) Analysis of Mechanical, Thermal, and Dynamic Mechanical Behaviors of Different Polymer-Coated Sisal Fibers. Journal of Natural Fibers. , 7. pp. 100-110. ISSN 1544-0478

G., Mary and S.K., Bajpai and Navin, Chand (2010) Antibacterial Activity of Zn-Loaded Grafted Fibers—Mechanical Strength and Biocidal Action. Journal of Natural Fibers. , 7. pp. 34-41. ISSN 1544-0478

Navin, Chand and Prabhat , Sharma and M. , Fahim (2010) Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene. Materials Science and Engineering: A, 527. pp. 5873-5878.

A., Nigrawal and Navin, Chand (2010) Development and electrical characterization of carbon soot filled polyester graded composites. Materials & Design, 31. pp. 3672-3676.

S.K., Bajpal and Navin, Chand and Grace, Mary (2010) Preparation of poly(acrylonitrile)-grafted silk fibers with antibacterial properties. Fibers and Polymers, 11. pp. 338-345. ISSN 1229-9197

A., Patnaik and A., Satapathy and Navin, Chand and N.M., Borkula and S., Biswas (2010) Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review. Wear, 268. pp. 249-263. ISSN 0043-1648

Navin, Chand and S.K., Bajpai and R., Joshi and Grace, Mary (2010) THERMOMECHANICAL BEHAVIOR OF SISAL FIBERS GRAFTED WITH POLY(ACRYLAMIDE-CO-N-VINYL-2-PYRROLIDONE) AND LOADED WITH SILVER IONS OR SILVER NANOPARTICLES. BioResources, 5. pp. 372-388.

Navin, Chand and Prabhat , Sharma and M., Fahim (2010) Tribology of maleic anhydride modified rice-husk filled polyvinylchloride. Wear, 269. pp. 847-853. ISSN 0043-1648

V, Chaurasia and Navin, Chand and S.K., Bajpai (2010) Water Sorption Properties and Antimicrobial Action of Zinc Oxide Nanoparticles-Loaded Cellulose Acetate Films. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 47. pp. 309-317.

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2009) Concentration Profile of Glass Fiber Bundles in Epoxy- Based Gradient Composites During Centrifugation. Journal of Applied Polymer Science, 113. pp. 3840-3846. ISSN 0021-8995

Navin, Chand and S.K., Bajpal and Grace, Mary (2009) Coper (II) and copper nanoparticles-loaded chemically modified cotton cellulose fibres with fair antibacterial properties. Journal of Applied polymer Science., 113. pp. 757-766. ISSN 0021-8995

Navin, Chand and A., Nigrawal (2009) Development, Dielectric, and Thermal Studies on HAF Carbon-filled Polyester Gradient Composites. Journal of Composite Materials. , 43. pp. 2859-2869. ISSN 0021-9983

Navin, Chand and Bhajan Das, Jhod and Vijai, Kumar (2009) Development, Mechanical, Thermal and Electrical Properties of Linseed Husk Powder Filled PVC Composites. Journal of Biobased Materials and Bioenergy, 3. pp. 165-171. ISSN 1556-6560

Navin, Chand and U.K ., Dwivedi (2009) Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite. Applied Composite Materials, 16. pp. 93-100. ISSN 0929-189X

U.K ., Dwivedi and Navin, Chand (2009) Influence of MAg PP on abrasive wear behavior of Chopped sisal fibre reinforced PP Composites. Journal of Materials Processing Technology, 209.

Navin, Chand and B. Jhod, Das (2009) Mechanical, electrical and Thermal properties of Maleic Anhydride Modified Rice Husk Filled PVC Composites. Bio Resources, 4. pp. 1228-1242.

U.K ., Dwivedi and Ajoy, Ghosh and Navin, Chand (2009) Role of PVA Modification in Improving the sliding wear behavior of Bamboo. Bio Resources, 4. pp. 522-528. ISSN 1930-2126

Navin, Chand and A.M., Naik (2008) Development and High stress abrasive behavior of milled carbon fibre reinforced Epoxy gradient composites. POLYMER COMPOSITES, 29. pp. 1-9. ISSN 0272-8397

Navin, Chand and A., Nigrawal (2008) Development and electrical conductivity behavior of copper-powder-filled-epoxy graded composites. Journal of Applied Polymer Science, 109. pp. 2384-2387. ISSN 0021-8995

Navin, Chand and M.K., Sharma (2008) Development and sliding wear behavior of milled carbon fiber reinforced epoxy gradient composites. Wear, 264. pp. 69-74. ISSN 0043-1648

Navin, Chand and Archana , Nigrawal and Deepak , Jain (2008) Dielectric Behavior of Maleic Anhydride Grafted Polypropylene (MAgPP) Modified Sisal Fiber Reinforced PP Composites. Journal of Natural Fibers. . pp. 270-288. ISSN 1544-0478

Navin, Chand and U.K ., Dwivedi (2008) Influence of Wood Flour Loading on Tribological Behavior of Epoxy Composites. POLYMER COMPOSITES, 29. pp. 1189-1192. ISSN 0272-8397

G., Mary and Navin, Chand and S.K., Bajpal (2008) A Novel approach to prepare Zn (II) loaded Cotton fibres with antibacterial Property. Journal of Macromolecular Science, 45. pp. 795-803.

Navin, Chand and M., Mehra (2008) Thermal and D C Conductivity Behavior of Fly ash Filled Polyaniline Composites Polymer. Plastics Technology and Engineering, 47. pp. 883-886.

Dr., S A R Hashmi and Dr., Pratibha Sharma and Navin, Chand (2008) Thermal and Rheological Behavior of Ultrafine Fly Ash Filled LDPE Composites. Journal of Applied Polymer Science, 107. pp. 2196-2202. ISSN 0021-8995

Umesh , K dwivedi and Ajay , Ghosh and Navin, Chand (2007) Abrasive wear behaviour of bamboo powder filled polyester composite. bamboo composites, 7. pp. 693-698.

Navin, Chand and A., Naik (2007) Abrasive wear studies on maleic anhydride modified PP and PET Blends. J Engineering Tribology., 221. pp. 489-499.

Navin, Chand and Dr., U.K. Dwivedi and Dr., S.K. Acharya (2007) Anisotropic abrasive wear behaviour of bamboo (Dentrocalamus strictus). Wear, 262. pp. 1031-1037. ISSN 0043-1648

Navin, Chand and U.K ., Dwivedi (2007) Development and tribological behaviour of UHMWPE filled epoxy gradient composites. Wear, 262. pp. 184-190. ISSN 0043-1648

Navin, Chand and A, Naik and H. K, Khaira (2007) Development of UHMWPE modified PP/PET blends and their mechanical and abrasive wear behavior. POLYMER COMPOSITES, 28. pp. 267-272. ISSN 0272-8397

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2007) Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear, 262. pp. 1426-1432. ISSN 0043-1648

Navin, Chand and U.K ., Dwivedi (2007) High stress abrasive wear study on bamboo Journal of materials processing technology. Journal of materials processing technology, 183. pp. 155-159.

Navin, Chand and U.K ., Dwivedi (2007) Influence of fiber orientation on high stress wear behavior of sisal fiber reinforced epoxy composites. POLYMER COMPOSITES. pp. 437-441. ISSN 0272-8397

Dr., S K PATEL and Dr., R B PATEL and Dr., A AWADHIA and Navin, Chand and Dr., S L AGRAWA (2007) Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes. Indian Academy of Sciences, 69. pp. 465-475.

Navin, Chand and U.K ., Dwivedi (2006) Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites. Wear, 261. pp. 1057-1063. ISSN 0043-1648

Navin, Chand and Deepak , Jain (2006) Effect of temperature on electrical behavior of flyash-filled epoxy gradient composites. Journal of Applied Polymer Science, 100. pp. 1269-1276. ISSN 0021-8995

Dr., S A R Hashmi and Dr., A Naik and Navin, Chand (2006) Effects of hybrid composition of LCP and glass fibres on abrasive wear of reinforced LLDPE. Bulletin of Materials Science, 29. pp. 49-54. ISSN 0250-4707

Dr., S A R Hashmi and Dr., U K Dwivedi and Navin, Chand (2006) Friction and sliding wear of UHMWPE modified cotton fibre reinforced polyester composites. tribology letters, 21 (2). ISSN 1023-8883

Dr., S A R Hashmi and Dr., U K Dwivedi and Dr., D Jain and Dr., A Naik and Navin, Chand (2005) Graphite–Epoxy Graded Material by Centrifugation. Journal of Applied Polymer Science, 96. ISSN 0021-8995

Dr., Takeshi Kitano and Dr., S A R Hashmi and Navin, Chand (2005) Influence of steady shear flow on dynamic viscoelastic properties of un-reinforced and Kevlar, glass fibre reinforced LLDPE. Bulletin of Materials Science, 27. pp. 409-415. ISSN 0250-4707

Navin, Chand and Dr., S A R Hashmi and Dr., S Lomash and Dr., A Naik (2004) Development of Asbestos Free Brake Pad. Journal MC, 85. pp. 13-16. ISSN 1054-2523

Dr., SOMIT NEOGI and Dr., S A R Hashmi and Navin, Chand (2003) Role of PET in improving wear properties of PP in dry sliding condition. Bulletin of Materials Science, 26 (6). ISSN 0250-4707

Dr., S A R Hashmi and Dr., SOMIT NEOGI and Dr., Anuradha Pandey and Navin, Chand (2001) Sliding wear of PP/UHMWPE blends: effect of blend composition. Wear, 247. ISSN 0043-1648

Dr., Vineeta Jain and Dr., Alok Mittal and Navin, Chand and Dr., S A R Hashmi and Dr., J M Keller (2000) Air gap thermally stimulated discharge current on unstretched and stretched polypropylene film thermoelectret. Journal of Materials Science Letters, 19. pp. 523-527. ISSN 0261-8028

Dr., VINEETA JAIN and Dr., Alok Mittal and Navin, Chand and Dr., S A R Hashmi and Dr., J M Keller (2000) Air gap thermally stimulated discharge current on unstretched and stretched polypropylene film thermoelectret. Journal of Materials Science Letters,, 19. pp. 523-527. ISSN 0261-8028

Dr., S A R Hashmi and Dr., Takeshi Kitano and Navin, Chand (2000) Dynamic Mechanical Behavior of LCP Fiber/Glass Fiber-Reinforced LLDPE Composites. POLYMER COMPOSITES, 22 (2). pp. 213-220. ISSN 0272-8397

Dr., S A R Hashmi and Navin, Chand (1999) Effect of addition of polycarbonateon sheared flow of red mud-filled isotactic polypropylene. Bulletin of Materials Science, 22 (4). pp. 801-804. ISSN 0250-4707

Navin, Chand (1986) Adhesion of sisal fibre in polyester. POLYMER COMPOSITES. ISSN 0272-8397

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behavior of Al RSP-polyester composite. J. Materials Science .

Navin, Chand and S , Das and P K , Rohtagi (1986) Mechanical behaviour of rapidly solidified aluminium-silicon ribbon-polyester composites. Journal of Materials Science Letters. ISSN 0261-8028

Navin, Chand and P K , Rohtagi (1986) Structure and properties of Hibiscus pandureformis. A new type fibre. Proc. Third international symposium on Development in Fibre Reinforced Cement and Concrete. International Journal of Cement Composites and Lightweight Concrete.

Navin, Chand and A.C. , Khazanchi and P K , Rohtagi (1985) Structure and properties of Ipomoea carnea: Its performance in polymer, clay and cement based composites. International Journal of Cement Composites and Lightweight Concrete, 8. pp. 11-20.

Navin, Chand and K.K., Verma and Mohini , Saxena and A.C., Khazanchi and P K , Rohtagi (1984) Materials science of Plant based materials of Madhya Pradesh for Housing Proceedings of International Conference on Low Cost Housing for developing countries. Roorkee. pp. 191-201.

Navin, Chand and S., Sood and P K , Rohtagi and K.G., Stayanarayana (1984) "Resources, structure, properties and uses of natural fibers of Madhya Pradesh". Journal of Scientific and Industrial Research , 43. pp. 489-499.

Navin, Chand (1984) A new relationship of Tg with interchain spacing. Pop. Plastics.

M.N., Bapat and Navin, Chand and Janu , Sharma (1983) Effect of cenosphere on dielectric properties of low density polyethylene. Result in Physics..

Navin, Chand (1983) Surface studies of amine treated PET filament. J Tex Res , 8. pp. 83-84.

Navin, Chand (1983) A new relationship of d.c. conductivity with loss modulus in PET. Journal of Materials Science Letters, 22. pp. 83-84. ISSN 0261-8028

Navin, Chand (1982) D.C. conductivity study of Bacl2 adoped PVC A new Tg d.c. conductivity relation. India J. of Phy, 15A.

Navin, Chand (1982) Electrical Prop. Of polymer salt. Pop. Plastics Jan , 3.

Navin, Chand (1982) Free volume and ionic dc conductivity in polymers. Journal of Applied Polymer Science, 27. pp. 4889-4891. ISSN 0021-8995

Navin, Chand (1982) Studies in surface anistrophy of PET fibres by ESCA and SEM. Pop. Plastics. POLYMER COMPOSITES. ISSN 0272-8397

Navin, Chand (1982) Surface studies of acid treated poly (ethylene terephthalate) filaments. Colloids and Surfaces , 4. pp. 193-195. ISSN 10.1016/0166-6622(82)80008-5

Navin, Chand (1981) Determination of styrene maleic anhydride copolymer composition by ESCA. Pop. Plastic, 3.