Article

B K , Prasad and S.P., Narayan and Dr., O. P. Modi and N. , Ramakrishnan and A M, Kumar and A K, Sachdeva (2012) Effect of Cerium and Aluminium on the Hot-Deformation Behaviour of Magnesium. Zeitschrift Fur Metallkunde, 103. pp. 590-602. ISSN 1862-5282

M. , AHMED and S. K., PANTHI and N., Ramakrishnan and A K , Jha and Dr., A H Yegneshwaran and DasGupta, R and S., AHMED (2011) Alternative flat coil design for electromagnetic forming using FEM. Transactions of Nonferrous Society of China,, 21. pp. 618-625. ISSN 1003-6326

Maheshwari, A.K. and Pathak, K.K and N. , Ramakrishnan and Narayan, S.P (2010) Modified Johnson-Cook Material Flow Model for Hot Deformation Processing. Journal of Materials Science. ISSN 0022-2461

S. , Saxena and N. , Ramakrishnan and J.S., Chouhan (2010) Establishing methodology to predict fracture behaviour of piping components by numerically predicting specimen fracture data using tensile specimen test. Engineering Fracture Mechanics, 77. pp. 1058-1072. ISSN 0013-7944.

N. , Ramakrishnan and K.K., Pathak and S.P., Narayan and Amit kumar, Maheswari (2010) Modified Johnson–Cook material flow model for hot deformation processing. Journal of Materials Science,, 45. pp. 859-864. ISSN 0022-2461

K.K., Pathak and V.S, Pagey and N. , Ramakrishnan (2010) Optimisation of extrusion die profile to satisfy metallurgical and manufacturing criteria. Materials Science and Technology, 26. pp. 732-737. ISSN 0267-0836

Pathak, K.K and Lomash, S and Jha, A.K. and N. , Ramakrishnan (2010) Process and Die Profile Design for Tube Extrusion of g Iron. Structural and Multidisciplinary Optimization. ISSN 1615-147X

Chouhan, J.S and Saxena, S and N. , Ramakrishnan (2009) Assessing Fracture Behaviour of Circumferentially TWC Elbows Subjected to Closing and Opening Moment. Nuclear Engineering and Design.

D.P., Mondal and S , Das and N. , Ramakrishnan and K. Udaya, Bhaskar (2009) Cenosphere filled aluminum syntactic foam made through stir-casting technique. Composites Part A: Applied Science and Manufacturing, 40. pp. 279-288. ISSN 1359-835x

A., Anshul and S S, Amritphale and Dr., Navin Chandra and N. , Ramakrishnan and A., Shrivastava and U.S.P., Verma (2009) Chemically formulated ceramic gamma ray irradiation shielding materials utilising red mud. Materials Science and and Engineering A, 108. pp. 429-437. ISSN 1743-6753

N. , Ramakrishnan and Chouhan, J.S and Saxena, S (2009) Coupled Phenomenological and Fracture Mechanics Approach to Assess the Fracture Behaviour of TWC Piping Component. Nuclear Engineering and Design. ISSN 0029-5493

S. , Saxena and N. , Ramakrishnan and B.K., Dutta (2009) Determination of stretch zone width using fem. Engineering Fracture Mechanics, 76. pp. 911-920. ISSN 0013-7944.

K.K., Pathak and P., Dutt and N. , Ramakrishnan (2009) Evaluation of Local Co-Ordinates in Finite Elements Using Generic Algorithm. J Structural Engineering, 35. pp. 247-248.

Sanjeev, Saxena and J S, Chauhan and N., Ramakrishnan (2009) Fatigue life prediction analysis of surface cracked straight pipes. Transactions of The Indian Institute of Metals, 62. pp. 191-195.

S.K., Panthi and N. , Ramakrishnan and M. , Ahmed and S.S., Singh and M.D., Goel (2009) Finite Element Analysis of sheet metal bending process to predict the springback. Materials & Design, 31. pp. 657-662.

Saxena, S and N. , Ramakrishnan (2009) An Improved Method for Numerical Determination of SZW Using FEM. Nuclear Engineering and Design. ISSN 0029-5493

K.K., Pathak and S., Lomesh and A K , Jha and N. , Ramakrishnan (2009) Process and die profile design for tube extrusion of γ iron. Structural and Multidisciplinary Optimization, 40. pp. 491-496. ISSN 1615-147X

A., Chrysanthou and Dr., O. P. Modi and Li, Han and N. , Ramakrishnan and J.M., O'Sullivan (2008) Formation and microstructure of (Ti, V) C-Reinforced iron matrix composites using self propagating high-temperature synthesis. International Journal of Materials Research, 99. pp. 281-286. ISSN 1862-5282

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J S, Chauhan (2008) Prediction of springback in straight flanging using FEM. CMC, 136. pp. 1-7.

U.B., Kodukula and Y.R., Murthy and K.K., Rao and N. , Ramakrishnan and P., Biral and P.C, Naganoor and R., Venugopal (2008) Studies on water-injection cyclone for processing iron ore fines. Minerals & Metallurgical Processing, 25. pp. 79-84.

Panthi, S.K. and Chouhan, J.S and DasGupta, R and N. , Ramakrishnan (2008) Study of Effect of Load on Springback in Sheet Metal Bending. Transactions of the Indian Institute of Metals.

S , Das and D.P., Mondal and N. , Ramakrishnan and Sawla, S (2008) Synergic Effect of Reinforcement and Heat Treatment on the Two-Body Abrasive Wear of an Al–Si Alloy under Varying Loads and Abrasive Sizes. Wear. ISSN 0043-1648

B., Srivathsa and N. , Ramakrishnan (2008) An analytical model for explosive compaction of powder to cylindrical billets through axial detonation. CMC- Computers Materials & Continua, 7. pp. 9-23. ISSN 1546-2218

Saxena, S and N. , Ramakrishnan (2007) A Comparison of Micro, Meso and Macro Scale FEM Analysis of Ductile Fracture in a CT Specimen (Mode I). Computational Materials Science.

K. Udaya, Bhaskar and Y., Ramamurthy and M. Ravi, Raju and Sumit, Tiwari and J.K., Shrivastava and N. , Ramakrishnan (2007) CFD simulation and experimental validation studies on hydrocyclone. Minerals Engineering. pp. 60-71. ISSN 1754-890X

K., Udaya Bhaskar and Y., Udaya Bhaskar and N. , Ramakrishnan and J.K. , Srivastava and Supriya, Sarkar (2007) CFD validation for flyash particle classification in hydrocyclones. Minerals Engineering, 20. pp. 290-302.

Saxena, S and N. , Ramakrishnan (2007) Characterizing Crack Initiation Load in Circumferentially Through-Wall Cracked Elbows under Bending Load. International Journal of Pressure Vessels and Piping.

D.P., Mondal and N. , Ramakrishnan and Suresh, K.S. and S , Das (2007) Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A. ISSN 0921-5093

S S, Amritphale and N. , Ramakrishnan and Chandra, N and Anshul, A (2007) Development of Celsian Ceramics from Fly Ash Useful for X-Ray Radiation Shielding Applications. Journal of European Ceramic Society.

V., Rajput and D.P., Mondal and S , Das and A K , Jha and N. , Ramakrishnan (2007) Effect of Si Cp addition on age hardening of aluminum composite and close cell aluminum composite foam. J Mater Sci, 42. pp. 7408-7414. ISSN .1007/s10853-007-1837-x

Jha, A.K and N. , Ramakrishnan and S , Das and D.P., Mondal and Rajput, V (2007) Effect of SiCp Addition on Age-Hardening of Aluminium Composite and Closed Cell Aluminium Composite Foam. Journal of Materials Science. ISSN 0022-2461

S., Sawla and S , Das and D.P., Mondal and N. , Ramakrishnan (2007) Microstructure and mechanical properties of Al alloy and Al alloy Si Cp composite foam. Trans Indian Inst Met, 60. pp. 495-504.

S S, Amritphale and Chandra, N and Anshul, A and N. , Ramakrishnan (2007) A Novel Process for Making Radiopaque Materials Using Bauxite-Red Mud. Journal of European Ceramic Society.

S , Das and Suresh, K.S. and N. , Ramakrishnan and D.P., Mondal (2007) On the Moduli of Closed-Cell Aluminum Foam. Scripta Materialia.

D.P., Mondal and N. , Ramakrishnan and K.S., Suresh and S , Das (2007) On the moduli of closed cell aluminum foam. Scripta Materialia, 57. pp. 929-932.

K.K., Pathak and N. , Ramakrishnan (2007) Optimization of Die Angle and ram Velocity for Rod Extrusion Using Dynamic Material Modeling and Generic Algorithm. Indian jounral of engineering and material sciences, 14. pp. 399-402. ISSN 0971-4588

S. , Saxena and N. , Ramakrishnan and J S, Chauhan (2007) Prediction of smooth elbow behavior using FEM. Trans Indian Inst Met Engineering, 60. pp. 553-558.

S.K., Panthi and N. , Ramakrishnan and K.K., Pathak and J.S., Chouhan (2007) An analysis of spring back in sheet metal bending using finite method (FEM.). Journal of Materials Processing Technology, 186. pp. 120-124.

Sanjeev, Saxena and N. , Ramakrishnan (2007) A comparison of micro, meso and macroscale FEM analysis of ductile fracture in a CT specimen (mode I). Computational Material Science, 39. pp. 1-7.

D.P., Mondal and N. , Ramakrishnan and N.V., Ganesh and V.S., Muneshwar and S , Das (2006) Effeat of SiC concentration and strain rate on the compressive deformation behavior of 2014A1-SiCp composite. Materials Science & Engineering A, 433. pp. 18-31.

D.P., Mondal and N. , Ramakrishnan and S , Das (2006) FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites. Material Science & Engineering A, 433. pp. 286-290.

K.K., Pathak and S., Panthi and N. , Ramakrishnan (2005) Application of Neural Network in Sheet Metal Bending Process. Defence Science Journal, 55. pp. 125-131. ISSN 0304-3894

Sanjeev, Saxena and N. , Ramakrishnan (2004) Characterizing the crack initiation load in circumferentially through-wall cracked elbows under bending load. International Journal of Pressure Vessels and Piping,, 84. pp. 493-501. ISSN doi:10.1016/j.ijpvp.2007.04.001

Srinivasan, N and N. , Ramakrishnan (2002) Dynamic materials Modelling and finite element simulation of titanium alloy turbine disc forging. Materials Science and Technology. ISSN 0267-0836