M. , AHMED and S. K., PANTHI and N., Ramakrishnan and A K , Jha and Dr., A H Yegneshwaran and DasGupta, R and S., AHMED (2011) Alternative flat coil design for electromagnetic forming using FEM. Transactions of Nonferrous Society of China,, 21. pp. 618-625. ISSN 1003-6326

B K , Prasad and Dr., O. P. Modi and Dr., D P Mondal and Dr., A H Yegneshwaran and Dr., Pallavi Pandit and Dr., A Chrysanthou (2007) High-Stress Abrasive Wear Response of 0.2% Carbon Dual Phase Steel: Effects of Microstructural Features and Experimental Conditions. Materials Science and Engineering A. pp. 303-311. ISSN 0921-5093

Singh, I.B. and Chaturvedi, K and Dr., A H Yegneshwaran (2007) Thermal Immobilization of Cr, Cu and Zn of Galvanizing Waste in the Presence of Clay and Fly Ash. Environment and Technology.

Gazala, Ruhi and Dr., O. P. Modi and I. B., Singh and A K , Jha and Dr., A H Yegneshwaran (2006) Wear and electrochemical characterization of sol-gel alumina coating on chemically pre-treated mild steel substrate. Surface and Coatings Technology, 201. pp. 1866-1872.

I. B., Singh and G., Venkatachari and D.R., Singh and M., Singh and Dr., A H Yegneshwaran (2005) Effect of Cr(VI)-Fe (II) interaction on the corrosion resistances of iron at different Ph in dichromate solutions. Indian journal of chemical technology . pp. 635-640. ISSN 0971-457X

I. B., Singh and K., Chaturvedi and D.R., Singh and Dr., A H Yegneshwaran (2005) Thermal Stabilization of Metal Finishing Waste with Clay. Environmental Technology, 26. pp. 877-883. ISSN 0959-3330

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Jha and Dr., O. P. Modi (2004) Effect of Sand Concentration in the Medium and Traversal Distance and Speed on the Slurry Wear Response of a Zinc-Based Alloy Alumina Particle Composite. tribology letters, 17. pp. 301-309. ISSN 1023-8883

Yadav, M.S and D.P., Mondal and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad and DasGupta, R (2003) Effect of sillimanite particle Reinforcement on the dry sliding wears behavior of Aluminum alloy composite. Materials Science and Technology.

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (2003) Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel. Wear, 254. pp. 120-128. ISSN 0043-1648

Jha, A.K and Gachake, Arati and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran and Singh, M (2002) High Stress Abrasive Wear Behavior of Some Hardfaced Surfaces Produced by Thermal Spraying. Journal of Materials Engineering and Performance. ISSN 1059-9495

DasGupta, R and Dr., O. P. Modi and Dr., A H Yegneshwaran and Yadav, M S (2001) Steady shear flow properties of organic fiber reinforced LLDPE. Journal of Materials Science Letters 20.

B K , Prasad and Dr., O. P. Modi and Mondal, D P and S , Das and Jha, A.K and Dr., A H Yegneshwaran (2001) Erosion- corrosion- abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Material Science and Technology.

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and S , Das and Dr., D P Mondal and Dr., A H Yegneshwaran (2001) Erosion-Corrosion-Abrasion Characteristics of a Zinc-Based Alloy and Its Composite Containing Alumina Particle Dispersoid. Materials Science and Technology, 17. pp. 1444-1450. ISSN 0267-0836

DasGupta, R and Dr., O. P. Modi and Yadav, M S and Dr., A H Yegneshwaran (2001) Mechanisms of material removal under high stress abrasive wear conditions under varying experimental conditions. Journal of Materials Science Letters. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., R P Yadav and Dr., A K Jha and S , Das and Dr., A H Yegneshwaran (2001) Three Body Abrasion of a Zinc-Aluminium Alloy: Effects of Alumina Dispersoid and Abrasive Medium. Wear, 249. pp. 792-799. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (2001) Wear Characteristics of a Zinc-Based Alloy Compared with a Conventional Bearing Bronze under Mixed Lubrication Condition: Effects of Material and Test Parameters. Canadian Metallurgical Quarterly, 40. pp. 193-210.

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran and Dr., R Dixit (2000) Erosion of a High Carbon Steel in Coal and Bottom Ash Slurries. Journal of Materials Engineering and Performance, 9. pp. 522-5269. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Patwardhan (2000) Tensile Properties of Some Copper and Zinc Based Alloys: Effects of Strain Rate and Test Temperature. Journal of Materials Engineering and Performance, 9. pp. 688-699. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A, Roy and DasGupta, R (1999) Effect of Experimental Factors on the High Stress Abrasive Wear Behaviour of Steels and a Software Package for its Prediction. Journal of Materials Engineering and Performance, 8. pp. 375-379. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and Dr., R. P. Yadav and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Microstructure and Wear Behaviour of Zinc-Aluminium Alloys: Effects of Secondary Processing and Alloy Composition. Zeitschrift Fur Metallkunde, 15. pp. 439-443. ISSN 1862-5282

B K , Prasad and Dr., O. P. Modi and DasGupta, R and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Sliding Wear Response of a Zinc-Aluminium Alloy as Affected by SiC Particle Dispersion and Test Conditions. Journal of Materials Science Letters, 18. pp. 1731-1734. ISSN 0261-8028

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran (1999) Wear Response of a Zinc-Based Alloy in the Presence of SiC Particle Reinforcement : A Comparative Study with a Copper Base Alloy. Journal of Materials Engineering and Performance, 8. pp. 693-700. ISSN 1059-9495

B K , Prasad and Dr., K Venkateswaralu and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and S , Das (1998) Dry Sliding Wear Behaviour of a Zinc-Based Alloy: A Comparative Study with a Leaded-Tin Bronze. Materials Transactions of Japan Institute of Metals, 39. pp. 1121-1125. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran and S , Das and Dr., K Venkateswaralu (1998) Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 17. pp. 1381-1383. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Effects of Sand Concentration on Slurry Erosion of Steels. Materials Transactions of Japan Institute of Metals, 39. pp. 1185-1190. ISSN 1345--9678

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Hardfacing: A Technique for Combating Abrasive/Erosive Wear. Materials Transactions of Japan Institute of Metals, 39. pp. 1191-1196. ISSN 1345--9678

B K , Prasad and DasGupta, R and Dr., A K Jha and Dr., A H Yegneshwaran and Dr., O. P. Modi and S , Das (1998) Low Stress Abrasive Wear Behaviour of Hardfaced Steel. Journal of Materials Engineering and Performance, 7. pp. 221-226. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1998) Microstructure and Property Characterization of a Modified Zinc-Based Alloy and Comparison with Bearing Alloys. Journal of Materials Engineering and Performance, 7. pp. 130-135. ISSN 1059-9495

Dr., O. P. Modi and Mohini , Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) Role of ally matrix and dispersoid on the corrosion behavior of cast aluminium alloy composites. Corrosion, 54. pp. 129-134. ISSN 0010-9312

B K , Prasad and Dr., K Venkateswaralu and Dr., O. P. Modi and S , Das and Dr., A K Jha and Dr., A H Yegneshwaran and DasGupta, R (1998) Sliding Wear Behaviour of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions. Metallurgical and Materials Transactions A, 29A. pp. 2747-2752. ISSN 1073-5623

Dr., O. P. Modi and M., Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) The Role of Alloy Matrix and Dispersoid on the Corrosion Behaviour of Cast Aluminium Alloy Composites. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and DasGupta, R and Dr., A Naik (1998) Two-Body Abrasion Characteristics of a Zinc-Based Alloy: Effects of SiC Particle Reinforcement and Related Factors. Journal of Materials Science Letters, 17. pp. 901-903. ISSN 0261-8028

S , Das and A K , Jha and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1997) “Aluminium alloy hard particle composites : Potential wear resistant materials”. Proc International conference on Industrial Tribology . pp. 3-16.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Dry Sliding Wear Behaviour of a Modified Zinc-Based Alloy. Materials Transaction of Japan Institute of Metals, 38. pp. 197-204. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Factors Controlling the Abrasive Wear Response of a Zinc-Based Alloy Silicon Carbide Particle Composite. Composites Part A: Applied Science and Manufacturing, 28. pp. 301-308. ISSN 1359-835x

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of Aluminium Content on the Physical, Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Zeitschrift Fur Metallkunde, 88. pp. 33-338. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of the Nature of Microconstituents on the Tensile Properties of a Zinc-Based Alloy and a Leaded-Tin Bronze at Different Strain Rates and Temperatures. Journal of Materials Science, 32. pp. 1169-1175. ISSN 0022-2461

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Microstructural Modifications Through Compositional Alterations and Their Influence on the Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Scripta Materiallia, 27. pp. 323-328. ISSN 1359-6452

Dr., O. P. Modi and B K , Prasad and S , Das and A K , Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Microsture and mechanical and sliding wear properties of Zn-based alloys – Effects of swaging and Al-content Proc of Internationl Conference on Recent Advance in Metallurgical. Processes. New Age International Publishers. pp. 1255-1261.

B K , Prasad and DasGupta, R and Dr., O. P. Modi and S , Das and A K , Jha and Dr., A H Yegneshwaran (1997) Surface engineering A potential technique for improving the performance of mining and agricultural implements . J. Surface Engineering., 13. pp. 123-127.

B K , Prasad and A K , Patwardhan and Dr., A H Yegneshwaran (1997) Tensile properties of some Zn 27.5 Wt.% Al alloys as influenced by heat treatment and test conditions. JOURNAL OF MATER IAL S SC IENCE LETTERS, 16. pp. 1890-1893. ISSN 0261-8028

R., Dasgupta and B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (1997) Wear characteristics of a hardfaced steel in slurry. J. Wear, 209. pp. 255-262.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Characterization of the Wear Response of a Modified Zinc-Based Alloy vis-a-vis a Conventional Zinc-Based Alloy and a Bearing Bronze at a High Sliding Speed. Metallurgical and Materials Transactions , 27A. pp. 3513-3525. ISSN 1073-5623

A K , Jha and S , Das and Dr., O. P. Modi and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1996) Development of materials for shovel teeth for mining industries. J. Mine Tech, 17. pp. 78-82.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Dry Sliding Wear Characteristics of Some Zinc-Aluminium Alloys: A Comparative Study with a Bearing Bronze at a Slow Speed. Wear, 199. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Factors Controlling the Dry Sliding Wear Behaviour of a Leaded-Tin Bronze. Materials Science and Technology. pp. 427-435. ISSN 0267-0836

B K , Prasad and Dr., A H Yegneshwaran and Dr., O. P. Modi and Dr., K Venkat (1996) Influence of the Size and Morphology of Silicon Particles on the Physical, Mechanical and Wear Properties of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 15. pp. 1773-1776. ISSN 0261-8028

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Microstructure-Property Characterization of Some Zinc-Based Alloys: Effects of Heat Treatment Parameters. Zeitschrift Fur Metallkunde,, 87.

B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and Dr., A H Yegneshwaran (1995) Abrasive Wear Characteristics of a Zn - 37.2 Al - 2.5 Cu - 0.2 Mg Alloy Dispersed with Silicon Carbide Particles. Materials Transactions of Japan Institute of Metals. pp. 1048-1057. ISSN 1345--9678

A K , Jha and B K , Prasad and S , Das and Dr., A H Yegneshwaran and Dr., O. P. Modi (1995) Microstructure and wear of Al-alloy matrix composites. Proc. Conf. Industrial Tribology...

B K , Prasad and Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., M. L. Vaidya (1992) Dry Sliding Wear Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Materials Science and Engineering, 15A. pp. 235-245. ISSN 0921-5093

Dr., O. P. Modi and Dr., A H Yegneshwaran and P K , Rohtagi and A. K., Singh (1992) High-temperature strength of an aluminium alloy dispersed with graphite particles. Journal of Materials Science Letters, 11. pp. 1466-1468. ISSN 0261-8028

Dr., O. P. Modi and B K , Prasad and Dr., A H Yegneshwaran and Mohini , Saxena (1991) Effects of SIC dispersoid on the corrosion behaviour of squeeze Al-alloy-SiC composites. ibid.. pp. 915-920.

Dr., O. P. Modi and Dr., A K Singh and Dr., A H Yegneshwaran (1991) Temp. And strain rate effects on tensile behaviour of Al-Mg-2.5 gr. Particulate composite. ibid.. pp. 433-443.

Dr., S P Narayan and Dr., V S Muneswar and Dr., A H Yegneshwaran (1989) Spheroidisation Studies on High Strength Low Alloy Steel. Tool and Alloy Steel, 23.

S , Das and P K , Rohtagi and Dr., A H Yegneshwaran (1987) Characterisation of rapidly solidified Al-Si alloy. Journal of Materials Science, 2. pp. 3173-3177. ISSN 0022-2461

Dr., O. P. Modi and P K , Rohtagi and Mohini, Saxena and Dr., A H Yegneshwaran and , (1987) Corrosion characteristics of cast aluminum alloy—3 wt% graphite particulate composites in different environments. Corrosion Science, 27. pp. 249-256.

Dr., O. P. Modi and Dr., A H Yegneshwaran and R., Asthana and P K , Rohtagi (1987) Thermomechanical processing of Al based particulate composites. Journal of Materials Science Letters, 23. pp. 83-92. ISSN 0022-2461

Dr., A H Yegneshwaran and P K , Rohtagi and C. S. , Narendranath (1986) Observations of graphite structure under optical and scanning electron microscopes. Journal of Materials Science Letters, 5. pp. 592-594. ISSN 0261-8028

Dr., A H Yegneshwaran and Dr., Mohini Sexena and Dr., P K Rohatgi and Dr., Raj Kumar (1986) Surface finishing of Aluminium alloy particulate composites. Plating and Surface Finishing. ISSN 0360-3164

P K , Rohtagi and Dr., A H Yegneshwaran and R, kumar (1986) Surface finishing of aluminium alloys containing graphite and zircon particles. Plating and Surface Finishing,, 73. pp. 112-115. ISSN 0360-3164

Dr., P K Rohatgi and Dr., C S Narendranath and Dr., A H Yegneshwaran (1986) observation of graphite structure under optical and scanning electron miocroscopes. Journal of Materials Science, 5. pp. 592-594. ISSN 0022-2461

S , Das and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Microstructures of rapidly solidified Al-Si and Al-Si graphite particle composite. INCAL, 80.

Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., P K Rohatgi (1985) Thermechanical processing of cast particulate composites. Journal of Materials Science Letters. ISSN 0261-8028

Dr., K Tangri and Dr., A H Yegneshwaran (1984) Deformation behaviour of two phase materials: Cu-Al system. Material Science, 18. pp. 161-168.

Dr., A H Yegneshwaran and B. S., Majumdar and P K , Rohtagi (1984) Strenght and fracture behaviour of metal particulate composites. Materials Science and Engineering, 68. pp. 85-96.

Dr., A H Yegneshwaran and Dr., B S Majumder and Dr., P K Rohatgi (1984) Strength and fracture behaviour of metal matrix particulate composites. Material Science and Engineering.

B.S., Majumdar and A H , Yegneshwaran and P K , Rohtagi and Dr., A H Yegneshwaran (1984) Strength and fracture behaviour of metal/matrix particulate composites. Materials Science and Engineering A, 68. pp. 85-96. ISSN 0921-5093

Dr., K Taragi and Dr., A H Yegneshwaran and Dr., P Griese (1983) THE EFFECT OF MODERATE TEMPERATURE EFFLUENTS ON SELECTED MATERIALS USED IN AIR-TO-AIR ENERGY RECOVERY EQUIPMENT. Ashare Tranctions.

Dr., A H Yegneshwaran and Dr., K Taragi (1983) Investigation of the early stages of deformation of two phase copper-aluminum alloys. Metallurgical Transactions A, 14. pp. 2407-2413. ISSN 0360-2133

Dr., A H Yegneshwaran and Dr., K Taragi (1983) strain distribution and load transfer characteristics of a cu-9 wt% Al dual phase structure. Zeitschrift Fur Metallkunde. ISSN 1862-5282

Dr., O. P. Modi and Yadav, R.P. and S , Das and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad Three-body abrasion of a cast zinc-aluminum alloy: influence of Al2O3 dispersion and abrasive medium, Wear 249 (2001) 792-799. Wear. ISSN 0043-1648