B K , Prasad and S, Rathod and M, Sharma and Dr., O. P. Modi and A K, Khare (2013) Effect of Aluminium Addition on Densification Behaviour and Microstructural Features of P/M Processed Cu-TiC Composites. International Journal of Materials Research. ISSN 1862-5282

B K , Prasad (2013) Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy. International Journal of Materials Research. ISSN 1862-5282

B K , Prasad and A K, Gupta (2013) Effects of Microstructural Features and Test Parameters on the Abrasive Wear Response of an Al-Si Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and M, Sharma and G K , Gupta and Dr., O. P. Modi (2013) P/M Processed Titanium Foam: Influence of Morphology and Content of the Space Holder on Microstructure and Mechanical Properties. Powder Metallurgy. ISSN 0032-5899

B K , Prasad and S.P., Narayan and Dr., O. P. Modi and N. , Ramakrishnan and A M, Kumar and A K, Sachdeva (2012) Effect of Cerium and Aluminium on the Hot-Deformation Behaviour of Magnesium. Zeitschrift Fur Metallkunde, 103. pp. 590-602. ISSN 1862-5282

B K , Prasad (2012) Effects of Some Solid Lubricant Particles and Their Concentration in Oil towards Controlling the Wear Performance of a Leaded-Tin Bronze Bush. Canadian Metallurgical Quarterly, 51. ISSN 0008-4433

B K , Prasad and A K, Gupta and S , Das and R K, Panjoo (2012) Mechanical and Abrasive and Erosive-Corrosive Wear Properties of Eutectic Al-Si Alloy: Effects of T6 Heat Treatment Parameter. Transactions of Nonferrous Society of China. ISSN 1003-6326

B K , Prasad (2012) Sliding Wear Response of a Bronze Bushing: Influence of Applied Load and Test Environment. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad and S , Das and Aruna, Patel (2011) Compressive Deformation Behaviour of Al Alloy (2014)-10wt.% SiCp Composite: Effects of Strain Rate and Temperature. Materials Science and Engineering A. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., S P Narayan and Dr., N Ramakrishnan and Dr., A M Kumar and Dr., A K Sachdev (2011) Microstructure and Micromechanism Maps to Optimize Useful Deformation Processing Conditions in Magnesium Alloy. Materials Science and Technology, 27. pp. 1639-1647. ISSN 0267-0836

B K , Prasad and S, Rathod and M S, Yadav and Dr., O. P. Modi (2011) Sliding Wear Behaviour of Cast Iron: Influence of MoS2 and Graphite Addition to the Oil Lubricant. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (2011) Sliding Wear Behaviour of Zinc-Based Alloy vis-à-vis Gray Cast Iron as Influenced by Applied Load and Sliding Speed. Industrial Lubrication and Tribology. pp. 158-170. ISSN 0036-8792

B K , Prasad (2011) Sliding Wear Response of a Gray Cast Iron: Effects of Some Experimental Parameters. Tribology International. pp. 660-667. ISSN 0301-679X

B K , Prasad and Dr., O. P. Modi and Dr., M. Sharma and Dr., G K Gupta and Dr., Anil K Gupta (2011) Titanium foam through powder metallurgy route using acicular urea particles as space holder. Materials Letters, 65. pp. 3199-3201. ISSN 0167-577X

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) Influence of talc concentration in oil lubricant on the wear response of a bronze journal bearing. Wear, 269. pp. 498-505.

B K , Prasad (2010) Effects of Alumina Dispersion on the Erosive-Corrosive Wear Response of a Zinc-Based Alloy under Changing Slurry Conditions and Distance. Wear, 238. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and M S, Yadav and S, Rathod (2010) Effects of Some Solid Lubricants Suspended in Oil towards Controlling the Wear Performance of a Cast Iron. Journal of Tribology. ISSN 0742-4787

B K , Prasad and Rathod, S and Dr., O. P. Modi and Yadav, M S (2010) The Influence of Lead Suspension in Oil Lubricant on the Sliding Wear Behaviour of Cast Iron. tribology letters. ISSN 1023-8883

B K , Prasad (2010) Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil. Journal of Materials Engineering and Performance, 19. pp. 413-420. ISSN 1059-9495

S., Rathod and Dr., O. P. Modi and B K , Prasad and A., Chrysanthou and V.P., Deshmukh and A.K., shah and D., Vallauri (2009) Cast in situ Cu-TiC composites: Synthesis by SHS route and characterization. Material Science and Engineering A, 502. pp. 91-98.

Dr., O. P. Modi and B K , Prasad and Dr., A. Chrysanthou and Dr., A K Shah and Dr., V. P. Deshmukh (2009) Erosive–corrosive wear behaviour of Fe–TiC and cobalt based layers separately deposited on En31 steel. Materials Science and Technology, 23. ISSN 0267-0836

B K , Prasad (2009) Influence of Suspended Talc Particles in Oil And Nature of Material Microconstituents on Sliding Wear Characteristics of Cast Iron and Zinc-based Alloy. Canadian Metallurgical Quarterly, 48. pp. 455-464. ISSN 0008-4433

B K , Prasad (2009) Sliding Wear Behaviour of a Cast Iron as Affected by Test Environment and Applied Load. Industrial Lubrication and Tribology. ISSN 0036-8792

B K , Prasad and Dr., O. P. Modi (2009) Slurry Wear Characteristics of Zinc-Based Alloys: Effects of Sand Content of Slurry, Silicon Addition to Alloy System and Traversal Distance. Transactions of Nonferrous Society of China. ISSN 1003-6326

B K , Prasad and Mohini , Saxena and R K , Morchalle and Asokan, Pappu (2008) Plant Fibre Industrial Waste Reinforced Polymer Composites as a Potential Wood Substitute Material. Journal of Composite Materials.

B K , Prasad (2008) Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environmen. Tribology- Materials, Surfaces and Interfaces.

B K , Prasad (2008) Sliding Wear Response of Spheroidal Graphite Cast Iron as influenced by Applied Pressure, Sliding Speed and Test Environment. Canadian Metallurgical Quarterly.

B K , Prasad and Dr., O. P. Modi (2008) Sliding Wear Response of Zinc-Based Alloy as affected by Suspended Solid Lubricant Particles in Oil Lubricant. . Tribology - Materials, Surfaces and Interfaces.

B K , Prasad and Dr., O. P. Modi and A H , Yegneshwaran (2008) Wear Behaviour of Zinc-Based Alloys as Influenced by Alloy Composition, Nature of the Slurry and Traversal distance. Wear, 264. ISSN 0043-1648

B K , Prasad (2007) Dry sliding wear response of a Zn-based alloy con6taining 37.5 % al as affected by sliding conditions. Zeitschrift fur metallkunde.

B K , Prasad (2007) Dry sliding wear response of zinc-based alloy over a range of test speeds and loads: a comparative study with cast iron. tribology letters, 25. pp. 103-115. ISSN 1023-8883

B K , Prasad and Dr., O. P. Modi and Dr., V P Deshmukh and Dr., A Chrysanthou and Dr., A K Shah (2007) Erosive-Corrosive Wear Behaviour of Fe-TiC and Cobalt-Based Layers Separately Deposited on En31 Steel. Materials Science and Technology, 23. pp. 910-916. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and Dr., D P Mondal and Dr., A H Yegneshwaran and Dr., Pallavi Pandit and Dr., A Chrysanthou (2007) High-Stress Abrasive Wear Response of 0.2% Carbon Dual Phase Steel: Effects of Microstructural Features and Experimental Conditions. Materials Science and Engineering A. pp. 303-311. ISSN 0921-5093

Dr., O. P. Modi and S., Rathod and B K , Prasad and A K , Jha and G., Dixit (2007) The Influence of Alumina Particle Dispersion and Test Parameters on Dry Sliding Wear Behaviour of Zinc-based Alloy. Tribology International, 40. pp. 1137-1140. ISSN 0301-679X

B K , Prasad (2007) Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions. Wear, 262. pp. 262-273. ISSN 0043-1648

B K , Prasad (2007) Sliding Wear Response of Cast Iron as Influenced by Micro structural Features and Test Condition. Materials Science and Engineering A, 456. pp. 373-385. ISSN 0921-5093

B K , Prasad and Dr., O. P. Modi and Dr., S. Rathod and Dr., A K Jha and Dr., G. Dixit (2007) The influence of alumina particle reinforcement and test parameters on dry sliding wear behaviour of zinc-based alloy. Tribology International, 40. pp. 1137-1146. ISSN 0301-679X

B K , Prasad (2006) Influence of Alumina Dispersoid and Test Parameters on Erosive Wear Behaviour of a Cast Zinc-Aluminium alloy. Wear, 260. pp. 895-902. ISSN 0043-1648

B K , Prasad (2006) Sliding wear response of a cast iron under varying test environments and traversal speed and pressure conditions. Wear, 260. pp. 1333-1341. ISSN 0043-1648

B K , Prasad (2006) Slurry Wear Behavior of Zinc-Based Alloys: Influence of Some Material and Test Parameters. tribology letters, 21. pp. 113-119. ISSN 1023-8883

B K , Prasad (2005) Effectiveness of an Externally Added Solid Lubricant on the Sliding Wear Response of a Zinc–Aluminium Alloy, Its Composite and Cast Iron. tribology letters, 18. pp. 135-143. ISSN 1023-8883

B K , Prasad (2005) Effects of Heat Treatment on the Lubricated Sliding Wear Behaviour of Zinc–Based Alloy Containing Nickel under Varying Test Conditions. Zeitschrift Fur Metallkunde. pp. 1321-1327. ISSN 1862-5282

B K , Prasad (2005) Sliding Wear Response of a Zinc-Based Alloy and Its Composite and Comparison with a Gray Cast Iron: Influence of External Lubrication and Microstructural Features. Materials Science and Engineering A,. pp. 427-439. ISSN 0921-5093

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Jha and Dr., O. P. Modi (2004) Effect of Sand Concentration in the Medium and Traversal Distance and Speed on the Slurry Wear Response of a Zinc-Based Alloy Alumina Particle Composite. tribology letters, 17. pp. 301-309. ISSN 1023-8883

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and Dr., A K Shah and Dr., V. P. Deshmukh (2004) Effects of Material Composition and Microstructural Features on Dry Sliding Wear Behaviour of Fe-TiC Composite and a Cobalt-Based Stellite. tribology letters, 17. pp. 129-138. ISSN 1023-8883

B K , Prasad (2004) Influence of Heat Treatment Parameters on the Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Wear. pp. 1137-1144. ISSN 0043-1648

B K , Prasad (2004) Sliding Wear Behaviour of Bronzes under Varying Material Composition, Microstructure and Test Conditions. Wear, 257. pp. 110-123. ISSN 0043-1648

B K , Prasad (2004) Wear Response of a Zinc-Based Alloy Containing Silicon as Influenced by Material Microstructure and Test Conditions. Materials Science and Engineering A, 367. pp. 63-73. ISSN 0921-5093

Yadav, M.S and D.P., Mondal and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad and DasGupta, R (2003) Effect of sillimanite particle Reinforcement on the dry sliding wears behavior of Aluminum alloy composite. Materials Science and Technology.

Dr., O. P. Modi and D.P., Mondal and B K , Prasad and Singh, M and Khaira, H.K. (2003) Abrasive Wear behaviour of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties. Material Science and Engineering A. ISSN 0921-5093

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (2003) Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel. Wear, 254. pp. 120-128. ISSN 0043-1648

B K , Prasad (2003) Dry Sliding Wear Response of a Zn-Based Alloy Containing 37.5% Al as Affected by Sliding Conditions. Zeitschrift Fur Metallkunde. pp. 897-902. ISSN 1862-5282

B K , Prasad (2003) The Effect of Heat Treatment on Sliding Wear Behaviour of a Zinc-Based Alloy Containing Nickel and Silicon. Tribology Letters, 15. pp. 333-341. ISSN 1023-8883

B K , Prasad and Dr., O. P. Modi and H K , Khaira (2003) High-Stress Abrasive Wear Behaviour of a Zinc-Based Alloy and Its Composite Compared with a Cast Iron under Varying Track Radius and Load Conditions. Materials Science and Engineering A. pp. 343-354. ISSN 0921-5093

B K , Prasad (2003) Influence of Some Material and Experimental Parameters on the Sliding Wear Behaviour of a Zinc-Based Alloy, Its Composite and a Bronze. Wear. pp. 35-46. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and A H , Yegneshwaran (2003) Low-Stress Abrasive Wear Behaviour of a 0.2% C Steel: Influence of Microstructure and Test Parameters. tribology letters, 15. pp. 249-255. ISSN 1023-8883

B K , Prasad (2003) Microstructural Alterations Through Heat Treatment and Its Influence on Wear Response of a Silicon Containing Zinc-Based Alloy Under Different Test Conditions. Materials Science and Technology, 19. pp. 327-335. ISSN 0267-0836

B K , Prasad (2003) Slurry Wear Characteristics of a Zinc-Based Alloy. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (2003) The effects of Heat treatment on sliding wear behaviour of a Zinc-based alloy containing Nickel and Silicon. tribology letters. ISSN 1023-8883

B K , Prasad and Dr., O. P. Modi and D.P., Mondal and Dr., M. Singh and Dr., H. K. Khaira (2002) Abrasive Wear Behaviour of a High Carbon Steel: Effect of Microstructure and Experimental Parameters and Correlation with Mechanical Properties. Materials Science and Engineering, 343. pp. 237-242. ISSN 0921-5093

B K , Prasad (2002) Abrasive Wear Characteristics of a Zinc-Based Alloy and Zinc-Alloy/ SiC Composite. wear, 252. pp. 250-263. ISSN 0043-1648

Jha, A.K and Gachake, Arati and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran and Singh, M (2002) High Stress Abrasive Wear Behavior of Some Hardfaced Surfaces Produced by Thermal Spraying. Journal of Materials Engineering and Performance. ISSN 1059-9495

B K , Prasad (2002) Influence of Some Test Parameters on Dry Sliding Wear Characteristics of a Zinc-11.5% Aluminium Alloy. Journal of Materials Engineering and Performance,, 11. pp. 461-468. ISSN 1059-9495

B K , Prasad and M, Singh and D.P., Mondal and A K , Jha (2001) Dry Sliding Wear Behaviour of an Aluminium Alloy-Granite Particle Composite. . Tribology International.

B K , Prasad and Dr., O. P. Modi and A K , Jha and A K , Patwardhan (2001) Effects of Some Material and Experimental Variables on the Slurry Wear Characteristics of Zinc-Aluminium Alloys. Journal of Materials Engineering and Performance. pp. 75-80. ISSN 1059-9495

B K , Prasad and Dr., O. P. Modi and Mondal, D P and S , Das and Jha, A.K and Dr., A H Yegneshwaran (2001) Erosion- corrosion- abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Material Science and Technology.

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and S , Das and Dr., D P Mondal and Dr., A H Yegneshwaran (2001) Erosion-Corrosion-Abrasion Characteristics of a Zinc-Based Alloy and Its Composite Containing Alumina Particle Dispersoid. Materials Science and Technology, 17. pp. 1444-1450. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and Dr., R P Yadav and Dr., A K Jha and S , Das and Dr., A H Yegneshwaran (2001) Three Body Abrasion of a Zinc-Aluminium Alloy: Effects of Alumina Dispersoid and Abrasive Medium. Wear, 249. pp. 792-799. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (2001) Wear Characteristics of a Zinc-Based Alloy Compared with a Conventional Bearing Bronze under Mixed Lubrication Condition: Effects of Material and Test Parameters. Canadian Metallurgical Quarterly, 40. pp. 193-210.

B K , Prasad (2000) Effect of Microstructure on the Sliding Wear Performance of a Zn-Al-Ni Alloy. Wear, 240. pp. 100-112. ISSN 0043-1648

B K , Prasad (2000) Effects of Partially Substituting Copper by Silicon on the Physical, Mechanical and Wear Properties of Zn-37.5% Al-Based Alloy. Materials Characterization. pp. 301-308. ISSN 1044-5803

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran and Dr., R Dixit (2000) Erosion of a High Carbon Steel in Coal and Bottom Ash Slurries. Journal of Materials Engineering and Performance, 9. pp. 522-5269. ISSN 1059-9495

S , Das and S, Gupta and D.P., Mondal and B K , Prasad (2000) Influence of Load and Abrasive Size on the Two-Body Abrasive Wear of Al-SiC Composites. Aluminium Transactions.

B K , Prasad (2000) Microstructure and Tensile Property Characterization of a Nickel Containing Zinc-Based Alloy: Effects of Heat Treatment and Test Conditions. Materials Science and Engineering A, 277A. pp. 95-101. ISSN 0921-5093

B K , Prasad and Dr., A H Yegneshwaran and Dr., A K Patwardhan (2000) Tensile Properties of Some Copper and Zinc Based Alloys: Effects of Strain Rate and Test Temperature. Journal of Materials Engineering and Performance, 9. pp. 688-699. ISSN 1059-9495

B K , Prasad and DasGupta, R and Dr., O. P. Modi and A K , Jha (1999) A Comparison of Material Removal Mechanism under Low Stress Abrasive Condition of Steel and Hardfacing Alloys. Journal of Materials Engineering and Performance. pp. 437-442. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A, Roy and DasGupta, R (1999) Effect of Experimental Factors on the High Stress Abrasive Wear Behaviour of Steels and a Software Package for its Prediction. Journal of Materials Engineering and Performance, 8. pp. 375-379. ISSN 1059-9495

B K , Prasad (1999) Effects of Heat Treatment on the Partially Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy. Materials Transactions of Japan Institute of Metals, 18. pp. 578-585. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and DasGupta, R and Dr., A K Jha and D.P., Mondal (1999) Erosion-Corrosion Characteristics of Squeeze Cast Aluminium Alloy SiC Composite in Water and Sodium Chloride Solutions Containing Sand. Materials Science and Technology, 15. pp. 933-938. ISSN 0267-0836

B K , Prasad and Dr., O. P. Modi and A K , Jha and DasGupta, R (1999) Influence of Material Characteristics on the Abrasive Wear Response of Some Hardfacing Alloys. Journal of Materials Engineering and Performance, 18. pp. 190-196. ISSN 1059-9495

B K , Prasad and Dr., D P Mondal and DasGupta, R and S , Das (1999) Mechanism of Material Removal During Erosion-Corrosion of an Al-SiC Particle Composite. Wear, 236. 295-302. ISSN 0043-1648

B K , Prasad and Dr., O. P. Modi and Dr., R. P. Yadav and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Microstructure and Wear Behaviour of Zinc-Aluminium Alloys: Effects of Secondary Processing and Alloy Composition. Zeitschrift Fur Metallkunde, 15. pp. 439-443. ISSN 1862-5282

B K , Prasad and Dr., O. P. Modi and DasGupta, R and S , Das and Dr., A H Yegneshwaran and Dr., A K Jha (1999) Sliding Wear Response of a Zinc-Aluminium Alloy as Affected by SiC Particle Dispersion and Test Conditions. Journal of Materials Science Letters, 18. pp. 1731-1734. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and S , Das and Dr., M. Singh (1999) Slurry Erosion-Corrosion of Aluminium (Al-Cu) Alloy - Silicon Carbide Composites: Effects of Some Material and Experimental Variables. Zeitschrift Fur Metallkunde, 90. pp. 189-194. ISSN 1862-5282

B K , Prasad and Dr., A K Jha and S , Das and Dr., O. P. Modi and DasGupta, R and Dr., A H Yegneshwaran (1999) Wear Response of a Zinc-Based Alloy in the Presence of SiC Particle Reinforcement : A Comparative Study with a Copper Base Alloy. Journal of Materials Engineering and Performance, 8. pp. 693-700. ISSN 1059-9495

B K , Prasad and Dr., K Venkateswaralu and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and S , Das (1998) Dry Sliding Wear Behaviour of a Zinc-Based Alloy: A Comparative Study with a Leaded-Tin Bronze. Materials Transactions of Japan Institute of Metals, 39. pp. 1121-1125. ISSN 1345--9678

B K , Prasad (1998) Effect of Heat Treatment on Tensile Properties of Zinc-37.5 Mass % Aluminium Alloy Containing Nickel or Silicon. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran and S , Das and Dr., K Venkateswaralu (1998) Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 17. pp. 1381-1383. ISSN 0261-8028

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Effects of Sand Concentration on Slurry Erosion of Steels. Materials Transactions of Japan Institute of Metals, 39. pp. 1185-1190. ISSN 1345--9678

Dr., O. P. Modi and B K , Prasad and Dr., A K Jha and DasGupta, R and Dr., G. Dixit and Dr., R. P. Yadav (1998) Effects of Swaging and Aluminium Content on the Microstructure and Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Materials Transactions of Japan Institute of Metals, 39. pp. 582-586. ISSN 1345--9678

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and S , Das and DasGupta, R and Dr., A H Yegneshwaran (1998) Hardfacing: A Technique for Combating Abrasive/Erosive Wear. Materials Transactions of Japan Institute of Metals, 39. pp. 1191-1196. ISSN 1345--9678

B K , Prasad and DasGupta, R and Dr., A K Jha and Dr., A H Yegneshwaran and Dr., O. P. Modi and S , Das (1998) Low Stress Abrasive Wear Behaviour of Hardfaced Steel. Journal of Materials Engineering and Performance, 7. pp. 221-226. ISSN 1059-9495

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1998) Microstructure and Property Characterization of a Modified Zinc-Based Alloy and Comparison with Bearing Alloys. Journal of Materials Engineering and Performance, 7. pp. 130-135. ISSN 1059-9495

B K , Prasad (1998) Response of Some Cast Zinc - 37.5% Al - Based Alloys Comprising Nickel/Silicon Under Different Tensile Loading Conditions. Journal of Materials Engineering and Performance. ISSN 1059-9495

Dr., O. P. Modi and Mohini , Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) Role of ally matrix and dispersoid on the corrosion behavior of cast aluminium alloy composites. Corrosion, 54. pp. 129-134. ISSN 0010-9312

B K , Prasad and Dr., K Venkateswaralu and Dr., O. P. Modi and S , Das and Dr., A K Jha and Dr., A H Yegneshwaran and DasGupta, R (1998) Sliding Wear Behaviour of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions. Metallurgical and Materials Transactions A, 29A. pp. 2747-2752. ISSN 1073-5623

B K , Prasad (1998) Sliding Wear Response of Al-Cu Alloy: The Influence of SiC Particles reinforcement. Journal of Materials Science Letters, 17. pp. 1121-1123. ISSN 0261-8028

B K , Prasad and J P , Pandey (1998) Sliding Wear Response of Zinc-Based Alloy and Comparison to a Copper-Based Alloy. Metallurgical and Materials Transactions , 27A. pp. 1245-1255. ISSN 1073-5623

B K , Prasad and Dr., J P Pandey (1998) Sliding Wear Response of a Leaded-Tin Bronze: The Influence of the Counterface Material Characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

B K , Prasad and J P , Pandey (1998) Sliding wear behavior of a zinc based alloy compared with a leaded tin bronze. ibid. pp. 59-66.

B K , Prasad and J.P., Pandey (1998) Sliding wear5 response of a leaded-tin bronze : The influence of the counterface material characteristics. Journal of Materials Engineering and Performance, 7. pp. 122-129. ISSN 1059-9495

B K , Prasad and D.P., Mondal and S , Das (1998) Study of Erosive-Corrosive Wear Behaviour of an Aluminium Alloy Composite through Factorial Design of Experiments. Wear, 217A. pp. 1-6. ISSN 0043-1648

B K , Prasad (1998) Tensile Properties of Some Zinc-Based Alloys Comprising 27.5 Al: Effects of Alloy Composition, Microstructure and Test Conditions. Materials Science and Engineering A. pp. 257-266. ISSN 0921-5093

Dr., O. P. Modi and M., Saxena and B K , Prasad and A K , Jha and S , Das and Dr., A H Yegneshwaran (1998) The Role of Alloy Matrix and Dispersoid on the Corrosion Behaviour of Cast Aluminium Alloy Composites. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W

B K , Prasad and Dr., A K Jha and Dr., O. P. Modi and Dr., A H Yegneshwaran and DasGupta, R and Dr., A Naik (1998) Two-Body Abrasion Characteristics of a Zinc-Based Alloy: Effects of SiC Particle Reinforcement and Related Factors. Journal of Materials Science Letters, 17. pp. 901-903. ISSN 0261-8028

S , Das and A K , Jha and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1997) “Aluminium alloy hard particle composites : Potential wear resistant materials”. Proc International conference on Industrial Tribology . pp. 3-16.

B K , Prasad (1997) Dry Sliding Wear Behaviour of Zinc-Based Alloy: Influence of Heat Treatment and Sliding Speed and Pressure. Materials Science and Technology, 13. pp. 928-936. ISSN 0267-0836

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Dry Sliding Wear Behaviour of a Modified Zinc-Based Alloy. Materials Transaction of Japan Institute of Metals, 38. pp. 197-204. ISSN 1345--9678

B K , Prasad and J P , Pandey (1997) Dry Sliding Wear Behaviour of a Zinc-Based Alloy Against Different Counterface Materials. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

B K , Prasad (1997) Dry Sliding Wear Response of Some Bearing Alloys as Influenced by the Nature of the Microconstituents and Sliding Conditions. Metallurgical and Materials Transactions , 28A. pp. 809-815. ISSN 1073-5623

B K , Prasad (1997) Effects of silicon addition and test parameters on the sliding wear characteristics of zinc-based alloy containing 37.5% aluminium. Materials transactions - JIM, 38. pp. 701-706. ISSN 0916-1821

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Factors Controlling the Abrasive Wear Response of a Zinc-Based Alloy Silicon Carbide Particle Composite. Composites Part A: Applied Science and Manufacturing, 28. pp. 301-308. ISSN 1359-835x

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of Aluminium Content on the Physical, Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Zeitschrift Fur Metallkunde, 88. pp. 33-338. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Influence of the Nature of Microconstituents on the Tensile Properties of a Zinc-Based Alloy and a Leaded-Tin Bronze at Different Strain Rates and Temperatures. Journal of Materials Science, 32. pp. 1169-1175. ISSN 0022-2461

B K , Prasad and Dr., A K Jha and DasGupta, R and S , Das and Dr., K Venkateswaralu (1997) Influence of the SiC Reinforcement on the Abrasive Wear Response of an Al-Cu Alloy Under the Conditions of Varying Abrasive Size and Applied Load. Journal of Materials Science Letters, 16. pp. 1113-1115. ISSN 0261-8028

B K , Prasad (1997) Mechanical Properties and Sliding Wear Characteristics of Zinc-Based Alloys: Effects of Partially Substituting Copper by Silicon. Zeitschrift Fur Metallkunde, 88. ISSN 1862-5282

B K , Prasad (1997) Microstructural Features Controlling the Sliding Wear Response of Some Bearing Alloys. Zeitschrift Fur Metallkunde, 88. pp. 774-780. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1997) Microstructural Modifications Through Compositional Alterations and Their Influence on the Mechanical and Sliding Wear Properties of Zinc-Based Alloys. Scripta Materiallia, 27. pp. 323-328. ISSN 1359-6452

Dr., O. P. Modi and B K , Prasad and S , Das and A K , Jha and DasGupta, R and Dr., A H Yegneshwaran (1997) Microsture and mechanical and sliding wear properties of Zn-based alloys – Effects of swaging and Al-content Proc of Internationl Conference on Recent Advance in Metallurgical. Processes. New Age International Publishers. pp. 1255-1261.

DasGupta, R and B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1997) Slurry Erosive Wear of Hardfaced Steel: Effect of Experimental Parameters. Wear. ISSN 0043-1648

B K , Prasad and DasGupta, R and Dr., O. P. Modi and S , Das and A K , Jha and Dr., A H Yegneshwaran (1997) Surface engineering A potential technique for improving the performance of mining and agricultural implements . J. Surface Engineering., 13. pp. 123-127.

B K , Prasad and A K , Patwardhan and Dr., A H Yegneshwaran (1997) Tensile properties of some Zn 27.5 Wt.% Al alloys as influenced by heat treatment and test conditions. JOURNAL OF MATER IAL S SC IENCE LETTERS, 16. pp. 1890-1893. ISSN 0261-8028

R., Dasgupta and B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and Dr., A H Yegneshwaran (1997) Wear characteristics of a hardfaced steel in slurry. J. Wear, 209. pp. 255-262.

B K , Prasad and A H , Yegneshwaran and A K, Patwardhan (1996) Influence of Heat Treatment Parameters on the Microstructure and Properties of Some Zinc-Based Alloys. Journal of Materials Science, 31. pp. 6317-6324. ISSN 0022-2461

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Characterization of the Wear Response of a Modified Zinc-Based Alloy vis-a-vis a Conventional Zinc-Based Alloy and a Bearing Bronze at a High Sliding Speed. Metallurgical and Materials Transactions , 27A. pp. 3513-3525. ISSN 1073-5623

A K , Jha and S , Das and Dr., O. P. Modi and B K , Prasad and DasGupta, R and Dr., A H Yegneshwaran (1996) Development of materials for shovel teeth for mining industries. J. Mine Tech, 17. pp. 78-82.

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Dry Sliding Wear Characteristics of Some Zinc-Aluminium Alloys: A Comparative Study with a Bearing Bronze at a Slow Speed. Wear, 199. ISSN 0043-1648

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Factors Controlling the Dry Sliding Wear Behaviour of a Leaded-Tin Bronze. Materials Science and Technology. pp. 427-435. ISSN 0267-0836

B K , Prasad (1996) Influence of Heat Treatment on the Physical, Mechanical and Tribological Properties of a Zinc-Based Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad and Dr., A H Yegneshwaran and Dr., O. P. Modi and Dr., K Venkat (1996) Influence of the Size and Morphology of Silicon Particles on the Physical, Mechanical and Wear Properties of Aluminium-Silicon Alloys. Journal of Materials Science Letters, 15. pp. 1773-1776. ISSN 0261-8028

B K , Prasad and Dr., A H Yegneshwaran and A K , Patwardhan (1996) Microstructure-Property Characterization of Some Zinc-Based Alloys: Effects of Heat Treatment Parameters. Zeitschrift Fur Metallkunde,, 87.

B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and Dr., A H Yegneshwaran (1995) Abrasive Wear Characteristics of a Zn - 37.2 Al - 2.5 Cu - 0.2 Mg Alloy Dispersed with Silicon Carbide Particles. Materials Transactions of Japan Institute of Metals. pp. 1048-1057. ISSN 1345--9678

A K , Jha and B K , Prasad and S , Das and Dr., A H Yegneshwaran and Dr., O. P. Modi (1995) Microstructure and wear of Al-alloy matrix composites. Proc. Conf. Industrial Tribology...

B K , Prasad and Dr., O. P. Modi and A K , Jha and S , Das and A H , Yegneshwaran (1994) Abrasive Wear Behaviour of an AISI 5132 Steel Under Low-Stresses. Materials Transactions of Japan Institute of Metals, 35. ISSN 1345--9678

B K , Prasad (1994) Structure-Property Related Changes in a Hypoeutectic Aluminium-Silicon Alloy Induced by Solutionizing. Materials Transactions of Japan Institute of Metals, 35. pp. 873-878. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., A K Jha (1994) he Effects of Alumina Fibres on the Sliding Wear of a Cast Aluminium Alloy. Tribology International. Tribology International, 27. pp. 153-158. ISSN 0301-679X

B K , Prasad and T K, Dan and P K , Rohtagi (1993) Characterization and Microstructural Modifications of Pressure Die Cast Eutectic Aluminium-Silicon Alloy-Graphite Composite. Materials Transactions of Japan Institute of Metals. ISSN 1345--9678

B K , Prasad and Dr., O. P. Modi and Dr., Mohini Sexena and Dr., A K Jha (1993) Erosion-Corrosion Characteristics of an Aluminium Alloy - Alumina Fibre Composite. Wear, 169. pp. 119-124. ISSN 0043-1648

B K , Prasad (1993) Structure-Property Relations in a Hypereutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Journal of Materials Science, 28. pp. 100-104. ISSN 0022-2461

B K , Prasad and A K , Jha and S , Das and Dr., O. P. Modi and A H , Yegneshwaran (1993) Three-Body Abrasive Wear Behaviour of 0.98% C Steel. Wear. ISSN 0043-1648

B K , Prasad and S , Das (1993) Tribological Behaviour of Aluminium Alloy Composites: A Comparative Study With a Copper Base Alloy. Wear, 162. pp. 64-74. ISSN 0043-1648

B K , Prasad and Dr, S V Prasad and Dr, A A Das (1992) Abrasion-Induced Microstructural Changes and Material Removal Mechanisms in Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science, 27. pp. 4489-4494. ISSN 0022-2461

B K , Prasad and T K, Dan and P K , Rohtagi (1992) Characterization of and Structure-Property Relations in a Pressure Die Cast Hypoeutectic Aluminium-Silicon Alloy Dispersed with Graphite Particles. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad and Dr., Mohini Sexena and Dr., T. K. Dan (1992) Corrosion Behaviour of 2014-Graphite Composite in Various Environments. Journal of Materials Science, 27. pp. 4805-4812. ISSN 0022-2461

B K , Prasad and Dr., O. P. Modi and Mohini , Saxena and A H , Yegneshwaran and M. L, Vaidya (1992) Corrosion Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Journal of Materials Science. 3897-3902.. ISSN 0022-2461

B K , Prasad and Dr., O. P. Modi and Dr., A H Yegneshwaran and Dr., M. L. Vaidya (1992) Dry Sliding Wear Behaviour of Squeeze Cast Aluminium Alloy-Silicon Carbide Composites. Materials Science and Engineering, 15A. pp. 235-245. ISSN 0921-5093

B K , Prasad and Dr., Mohini Sexena and Dr., T. K. Dan (1992) Evaluation of Some Engineering Properties of an Enamel Coated Steel. Plating and Surface Finishing, 79. pp. 57-61. ISSN 0360-3164

B K , Prasad and Dr., S V Prasad (1992) Microstructural Changes During Low-Stress Abrasion of a Plain Carbon (0.5 % C) Steel. Wear, 151. pp. 1-12. ISSN 0043-1648

Dr., O. P. Modi and B K , Prasad and Dr., A H Yegneshwaran and Mohini , Saxena (1991) Effects of SIC dispersoid on the corrosion behaviour of squeeze Al-alloy-SiC composites. ibid.. pp. 915-920.

B K , Prasad and Dr, S V Prasad and Dr, A A Das (1991) Mechanisms of Material Removal and Subsurface Workhardening During Low Stress Abrasion of a Squeeze Cast Aluminium Alloy-alumina Fibre Composite. Materials Science and Engineering: A,, 156. pp. 205-209.

B K , Prasad (1991) Microstructural Modifications and Improvement in Properties of a Hypoeutectic Al-Si alloy Dispersed with Graphite Particles. Journal of Materials Science Letters.

B K , Prasad (1991) The Significance of Matrix Microstructure on the Solid Lubrication Characteristics of Graphite in Aluminium Alloys. Materials Science and Engineering A,, 144A. ISSN 0921-5093

B K , Prasad and T K, Dan (1991) Some Observations of the Effects of Overheating in a Hypoeutectic Al-Si Alloy. Zeitschrift Fur Metallkunde. ISSN 1862-5282

B K , Prasad and Dr., T. K. Dan (1990) Effect of Solutionzing a Graphitic Hypereutectic Al-Si Alloy At various Temperatures and time. Journal of Materials Science. ISSN 1573-4803

Dr., A A Das and Dr., S V Prasad and B K , Prasad (1990) MATERIAL REMOVAL MECHANISMS AND MICROSTRUCTURAL CHANGES DURING ABRASION OF SQUEEZE CAST ALUMINIUM ALLOY-MATRIX COMPOSITES. Journal of Materials Science.

B K , Prasad and Dr., T. K. Dan (1990) Microstructure - and Property - Related Changes in a Pressure Die Cast Graphitic Al-Si Alloy Induced by Heat Treatment. Journal of Materials Science Letters, 9. pp. 951-952. ISSN 0261-8028

B K , Prasad and T K, Dan and P K , Rohtagi (1987) Pressure-induced improvement in interfacial bonding between graphite and the aluminium matrix in graphitic-aluminium particle composites. JOURNAL OF MATERIAL SCIENCE LETTERS.

B K , Prasad and Dr, S P Gupta (1986) The Effect of Thermal Cycling on the Kinetics of Cellular Phase Transformation in a Cu-In Alloy. Materials Science and Engineering. Materials Science and Engineering, 77. pp. 181-190. ISSN 0921-5093

B K , Prasad Microstructure and Mechanical Properties of Al Alloy and Al Alloy - SiCp Composite Foam. Materials Science and Engineering A. ISSN 0921-5093

S , Das and A K , Jha and B K , Prasad and Dr., O. P. Modi and DasGupta, R and A H , Yegneshwaran Microstructure and wear of Al-Si-Zircon particle composite. ibid. pp. 555-560.

DasGupta, R and B K , Prasad and A K , Jha and Dr., O. P. Modi and S , Das and A H , Yegneshwaran Overly coatings for slurry erosion control. ibid. pp. 1263-1268.

B K , Prasad Sliding Wear Characteristics of a Gray Cast Iron as Influenced by the Sliding Speed, Load and Environment. Tribology- Materials, Surfaces and Interfaces.

Dr., O. P. Modi and Yadav, R.P. and S , Das and Dr., A H Yegneshwaran and Jha, A.K and B K , Prasad Three-body abrasion of a cast zinc-aluminum alloy: influence of Al2O3 dispersion and abrasive medium, Wear 249 (2001) 792-799. Wear. ISSN 0043-1648